Minimum Tank Size Calculator

Set a count above zero for each species you plan to keep. Only species with published minimums are listed — minimums are never guessed.

Minimum tank size

Set a count for each species you plan to keep — the minimum gallons, the minimum length, and the smallest standard tank that fits appear here.

Why use this calculator?

  • Buy the right tank the first time — too small means stressed fish and unstable water.
  • See the length, not just the gallons: fast swimmers need end-to-end room.
  • Get the smallest standard tank that fits, with its real dimensions.
  • Catch a school below its minimum group before the fish come home.

These are minimums, not ideals — one size up is steadier. Check the stocking against your tank with the Tank Stocking Calculator and the weight on your floor with the Floor Load Checker. · Back to Stocking & Fish Care

Set the count for each species you plan to keep and get the minimum tank size in gallons, the minimum length, and the smallest standard tank that fits — so you buy the right tank the first time. Everything runs in your browser; nothing is saved.

How it works

Each species has a base tank size that covers its minimum group, plus an extra volume per fish beyond that group. The calculator works out each species' need separately, then combines them. The numbers come from the table below — group sizes, activity and tank needs follow Seriously Fish species profiles, and adult sizes follow FishBase.

One species. Need r = base + max(0, n − group) × extra. The base covers the minimum group; every fish beyond the group adds the extra. Three neon tetras still need the full 10 gallons, because the base covers a group of 6 — fewer fish does not shrink the base.

Several species. Total = the largest single-species need + the extra volume for every fish of the other species. The largest species sets the base tank; the others add only their per-fish extra, because they share the same water — they do not each need their own full base.

Length. The minimum length is the longest minimum length on the list. A tank can have enough gallons and still be too short: zebra danios need 20 gallons but 30 inches of length, so a 20-gallon high tank (24 in long) fails them and a 20-gallon long (30 in) fits.

Height. Tall-bodied species need height as well as length. Angelfish need at least 18 inches of water height — a shallow tank cannot work for them, however many gallons it holds. That is why a single angelfish (30 gal, 30 in, 18 in tall) lands on a 55-gallon tank: the 30-gallon breeder and both 40-gallon tanks are too short in height.

Smallest standard tank. The calculator picks the first widely stocked retail size with gallons ≥ the total, length ≥ the minimum, and height ≥ the minimum. The 37-gallon size is not in the list, so the first fit above 29 gallons is the 40-gallon breeder.

Minimums, not ideals. These are the smallest tanks the species can live in, not the best ones. One size up gives steadier water, more aquascaping room and more forgiveness. Species not in the table are not offered — minimums are never guessed.

Worked example

8 neon tetras + 6 bronze corydoras + 1 dwarf gourami.

Inputs

Neon tetra: group 6, base 10 gal, +1 gal/fish, 20 in. Bronze corydoras: group 6, base 20 gal, +2 gal/fish, 24 in. Dwarf gourami: group 1, base 10 gal, +5 gal/fish, 20 in.

Formula

One species: r = base + max(0, n − group) × extra. Several: total = largest r + Σ (other species) n × extra. Length = longest minimum length.

Calculation

Neon: 10 + (8 − 6) × 1 = 12 gal. Cory: 20 + (6 − 6) × 2 = 20 gal. Gourami: 10 + (1 − 1) × 5 = 10 gal. Total = 20 + 8 × 1 + 1 × 5 = 33 gal. Length = max(20, 24, 20) = 24 in.

Result

At least 33 gallons, at least 24 in long. Smallest standard tank: 40 gal breeder (36 × 18 × 16 in). No warnings — all three groups meet their minimums.

Two more cases show the edges. A single angelfish needs 30 gallons, 30 inches long and 18 inches tall — the smallest standard tank that fits is the 55-gallon (48 × 12 × 21 in), because the 30-gallon breeder and both 40-gallon tanks are too short in height. And 6 zebra danios need 20 gallons but 30 inches of length, so the answer is the 20-gallon long (30 × 12 × 12 in), not the 20-gallon high (24 in long).

How to read your results

The headline is the minimum volume: "At least 33 gallons". Under it, the stocking line names every species and count, and the stat grid shows the three numbers that decide the tank: the minimum volume (with the largest single need behind it), the minimum length (with the height note where one applies), and the smallest standard tank (with its real dimensions).

Below the stats, the per-species table shows each species' own need, so you can see which species is driving the total. Under the table, the checks are grouped: "Caution" rows are warnings — a school below its minimum group, or two male bettas counted as one — and "OK" rows are the method note, the height note, and the weight reminder.

What to do next: if there is a Caution row, fix it before buying — buy the full school group, or choose another species. Then buy the standard tank named, or one size up: minimums are not ideals, and a bigger tank is steadier water.

Common mistakes

  • Buying by gallons alone. A 20-gallon high and a 20-gallon long hold the same water, but only the long one (30 in) fits zebra danios.
  • Counting fewer fish to shrink the tank. Three neon tetras still need 10 gallons — the base covers the minimum group of 6, and fewer fish does not shrink it.
  • Buying a partial school to "add the rest later". Schooling fish below their group hide, stress and get sick — buy the full group or choose another species.
  • Forgetting height for tall-bodied fish. Angelfish need 18 inches of water height; a shallow breeder tank fails them at any gallon count.
  • Adding the species' bases together. Two species share one tank — the total is the largest need plus the others' per-fish extras, not the sum of both bases.
  • Treating the minimum as the ideal. One size up is steadier water, more aquascaping room and more forgiveness — especially in a first tank.
  • Forgetting the weight. A filled tank weighs about 10 lb per gallon — a 40-gallon tank is about 400 lb before rock and stand. Check the stand and the floor before buying big.
  • Keeping two male bettas. They fight — the calculator counts one and warns you.

Species minimums

The numbers this calculator runs on. Base covers the minimum group; add the extra per fish beyond it.

SpeciesMin groupBaseExtra per fishMin lengthMin height
Angelfish130 gal10 gal30 in18 in
Betta (male)15 gal5 gal16 in—
Bronze corydoras620 gal2 gal24 in—
Dwarf gourami110 gal5 gal20 in—
Fancy goldfish120 gal10 gal30 in—
Guppy35 gal1 gal16 in—
Neon tetra610 gal1 gal20 in—
Ocellaris clownfish220 gal10 gal24 in—
Oscar175 gal50 gal48 in—
Platy310 gal2 gal20 in—
Zebra danio620 gal1.5 gal30 in—

— means no height minimum applies. A male betta is kept one to a tank, so it counts its 5 gallons when added to another species.

Standard tank sizes

The retail sizes the calculator picks from, smallest first. The smallest standard tank is the first size with gallons ≥ your total, length ≥ your minimum length, and height ≥ your minimum height.

TankGallonsDimensions (L × W × H)
5 gal516 × 8 × 10 in
10 gal1020 × 10 × 12 in
15 gal1524 × 12 × 12 in
20 gal long2030 × 12 × 12 in
20 gal high2024 × 12 × 16 in
29 gal2930 × 12 × 18 in
30 gal breeder3036 × 18 × 12 in
40 gal breeder4036 × 18 × 16 in
40 gal long4048 × 12 × 16 in
55 gal5548 × 12 × 21 in
75 gal7548 × 18 × 21 in
90 gal9048 × 18 × 24 in
125 gal12572 × 18 × 22 in

FAQ

Why isn't the total just the sum of each species' need?

Because the species share one tank. The largest species sets the base tank; the others add only their per-fish extra on top. Adding full bases together would double-count the same water.

Why do three neon tetras still need 10 gallons?

The 10-gallon base covers the minimum group of 6. Fewer fish does not shrink the base — and three neons are below their group anyway, so the calculator warns you to buy the full group of 6 or choose another species.

What if no standard tank fits?

The result says so plainly — you need a custom or larger tank. That usually means a very large fish (an oscar past the 125-gallon list) or a combination whose length or height no retail size meets.

Is the smallest standard tank the one I should buy?

It is the smallest that fits. One size up is steadier water, more aquascaping room and more forgiveness — and a filled tank weighs about 10 lb per gallon, so check the stand and the floor before buying big.

Why does a single angelfish need a 55-gallon tank?

Not for the gallons — 30 would do — but for the height. Angelfish need at least 18 inches of water height, and the 30-gallon breeder and both 40-gallon tanks are too short. The 55-gallon (48 × 12 × 21 in) is the first size that is tall enough.

Can I keep two male bettas if the tank is big enough?

No. Male bettas fight — the calculator counts one and warns you. One male per tank, whatever the size.

What if my species isn't listed?

Only species with published minimums are listed — minimums are never guessed. If yours is not there, use the same method with its care-guide numbers: base for the minimum group, extra per fish beyond it, and the longest minimum length.

Sources

  1. Froese & Pauly (eds.), FishBase — adult sizes (Standard). fishbase.org
  2. Seriously Fish — species profiles; group sizes, activity and tank requirements (Species profile). seriouslyfish.com
  3. TheCycledTank minimum-tank data — the species and standard-tank tables this calculator runs on (Our recommendation).

Related tools