EI Fertilizer Dosing Calculator

Volume units

Real water in the tank, not the label size

EI is designed around ~50% a week

Grams are dry-salt weights from ppm targets: KNO3 is 61.3% NO3, KH2PO4 is 69.8% PO4, K2SO4 is 44.9% K, CSM+B is 6.53% iron. Potassium from KNO3 and KH2PO4 is counted first — K2SO4 only tops up what is still missing. Weigh doses on a 0.01 g scale; a pinch is not a dose.

Your doses, in grams

Enter your tank volume — the per-dose and per-week grams appear here, with the schedule and the water-change check.

Why use this calculator?

  • Exact grams instead of pinches — no more guessing with teaspoons.
  • Potassium counted once — KNO3 and KH2PO4 add potassium too, so K2SO4 only tops up what is still missing.
  • One schedule for macros and micros — EI and PPS-Pro both laid out per dose and per week.
  • It warns you when the water change is too small for EI to work as designed.

Don't know your real water volume? Measure it with the Tank Volume Calculator first. Check the water itself with the Water Parameter Checker, and if algae shows up, run the Algae Identifier. · Back to Planted Tank

Enter your tank volume and dosing style and get exact grams of dry fertilizer per dose and per week — KNO3, KH2PO4, K2SO4 and CSM+B micros — with the hidden potassium counted. Everything runs in your browser; nothing is saved.

How it works

ppm means mg per litre, so the grams of salt for a target are worked out from the tank volume and the share of the nutrient in the salt:

Grams of salt = target ppm × litres ÷ (salt fraction × 1000). The same formula run backwards gives the ppm from a weighed dose: ppm = grams × 1000 × fraction ÷ litres.

Salt nutrient fractions by weight (from each salt's molecular formula; Rotala Butterfly, aquajocund.com and tswshop.com all agree): KNO3 is 61.3% NO3 and 38.7% K; KH2PO4 is 69.8% PO4 and 28.7% K; K2SO4 is 44.9% K; MgSO4·7H2O (Epsom salt) is 9.86% Mg; CSM+B is 6.53% iron (label figure — iron is the proxy for all the traces in the mix).

Potassium is counted once. KNO3 and KH2PO4 both add potassium, so the calculator works out how much K those two already deliver and only then tops up the rest with K2SO4. Weighing K2SO4 for the full K target on top of them would double-dose potassium.

StylePer-dose targets (ppm)How often
EI standardNO3 7.5, PO4 1.3, K 7.5, Fe 0.23×/week
EI low-techNO3 2.5, PO4 0.43, K 2.5, Fe 0.0673×/week
PPS-ProNO3 1.0, PO4 0.1, K 1.33, Mg 0.1, Fe 0.05Every day

EI standard is the high-tech, CO2-injected schedule (Rotala Butterfly EI; aquaplanet.me gives NO3 5–7.5, PO4 1–1.3, Fe 0.1–0.2 ppm per dose). EI low-tech is one-third of standard per dose on the same 3×/week schedule (FishLore: alternate macro/micro days at one-third standard concentrations). PPS-Pro is the lean daily method (aquariumfertilizer.com Perpetual Preservation System; Green Leaf Aquariums PPS-Pro guide — same figures). Note: this page's PPS-Pro style follows the Green Leaf Aquariums variant figures (Fe 0.05 ppm/day). The PPS-Pro Dosing Calculator follows Edward's original recipe instead, which gives 1.05 / 0.11 / 1.41 / 0.11 ppm NO3 / PO4 / K / Mg and 0.14 ppm Fe a day — the difference is the micro dose, explained on that page.

The water change is part of EI. EI doses in slight excess so plants never run short, and the ~50% weekly water change resets the tank before the excess can accumulate (Tom Barr EI; Green Leaf Aquariums EI guide). If your entered water change is under 50%, the result flags it — the doses stay the same, the reset does not.

Worked example

A 20 US gallon tank (75.7 litres) on EI standard, with a 50% weekly water change.

Inputs

75.7 litres of water. EI standard targets per dose: NO3 7.5, PO4 1.3, K 7.5, Fe 0.2 ppm. Water change 50%.

Formula

Grams = target ppm × litres ÷ (fraction × 1000). K2SO4 only tops up the K still missing after KNO3 and KH2PO4.

Calculation

KNO3 = 7.5 × 75.7 ÷ (0.613 × 1000) = 0.93 g. KH2PO4 = 1.3 × 75.7 ÷ (0.698 × 1000) = 0.14 g. K from KNO3 4.73 ppm + from KH2PO4 0.53 ppm = 5.27 ppm, so 2.23 ppm still needed: K2SO4 = 2.23 × 75.7 ÷ (0.449 × 1000) = 0.38 g. CSM+B = 0.2 × 75.7 ÷ (0.0653 × 1000) = 0.23 g.

Result

Per dose: 0.93 g KNO3 + 0.14 g KH2PO4 + 0.38 g K2SO4 (macros) and 0.23 g CSM+B (micros). Per week (3 doses each): 2.78 g, 0.42 g, 1.13 g and 0.70 g. No reset warning at 50%.

The same formula backwards: 1 g of KNO3 in that 20-gallon tank adds 8.10 ppm NO3 and 5.11 ppm K. A stock solution of 30 g KNO3 in 500 mL, dosed 10 mL at a time, adds 4.86 ppm NO3 per dose (50 doses per bottle). For 1 ppm of phosphate in the same tank, weigh 0.108 g of KH2PO4 — it also adds 0.41 ppm of potassium.

How to read your results

The verdict word names the style and schedule — "EI standard — 3×/week" or "PPS-Pro — every day (7×/week)". Under it, the water volume the doses were worked out from, and the per-dose targets.

The stat grid shows the three doses you will weigh most often — KNO3, KH2PO4 and CSM+B per dose — with the per-week total under each. The full table below it lists every salt, per dose and per week, and what each one adds: KNO3 adds NO3 plus K, KH2PO4 adds PO4 plus K, K2SO4 tops up only the K still missing, and CSM+B adds iron as the trace proxy. PPS-Pro also shows an Epsom salt (MgSO4) row — EI styles have no magnesium target, so that row only appears for PPS-Pro.

Below the table, the checks are grouped. "Needs action" is a block — fix it before dosing. "Caution" is the water-change warning: EI at under 50% a week. "OK" means that check passed. If the water-change warning shows, "How to fix it" lists the two options: raise the weekly change to about 50%, or drop to the EI low-tech style at one-third strength.

What to do next: weigh the per-dose grams on a 0.01 g scale, dose macros and micros on alternate days for EI (or both daily, just before lights on, for PPS-Pro), and do the weekly water change. Then watch the plants — new growth tells you more than any test kit.

Common mistakes

  • Dosing from the tank label instead of the real water volume. Substrate and decor take 10–20% of the space, so a "20-gallon" tank may hold about 16–18 gallons of water.
  • Counting potassium twice — weighing K2SO4 for the full K target on top of the K that KNO3 and KH2PO4 already add.
  • Mixing macros and micros in one bottle or dosing them the same day. Phosphate can bind iron and drop it out of solution — keep them separate.
  • Scooping with teaspoons instead of weighing. Spoon weights vary with grain size; a 0.01 g jewellery scale beats any spoon.
  • Dry-dosing pinches under a tenth of a gram. Weigh them, or mix a stock solution and dose by millilitres instead.
  • Skipping the 50% weekly water change on EI. The doses stay the same, but without the reset the excess has nowhere to go.
  • Blaming algae on the fertilizer. Excess nutrients alone do not cause algae — unstable CO2 and light do. Fix those before cutting doses.

What 1 gram of each salt adds

ppm of the main nutrient from 1 g of dry salt, by tank size — worked out with the same fractions this calculator uses.

SaltMain nutrient10 gal20 gal40 gal75 gal
KNO3NO316.208.104.052.16
KH2PO4PO418.449.224.612.46
K2SO4K11.855.932.961.58
MgSO4·7H2OMg2.601.300.650.35
CSM+BFe1.730.860.430.23

Note: the CSM+B row uses the 6.53% iron label figure this calculator uses. The competitor page this research started from lists CSM+B at 7% iron, which would give 1.85 / 0.92 / 0.46 / 0.25 ppm — the other four rows agree exactly. Solubility at 20 °C (CRC Handbook of Chemistry and Physics): KNO3 about 316 g/L, KH2PO4 about 226 g/L, K2SO4 only about 111 g/L — so 200 g of K2SO4 in 500 mL cannot dissolve. Keep stock solutions well under those limits.

FAQ

Why does the K2SO4 dose change when I change the other salts?

Because KNO3 and KH2PO4 already add potassium. The calculator works out their K first (4.73 + 0.53 = 5.27 ppm in the worked example) and only tops up the remaining 2.23 ppm with K2SO4. If you dosed K2SO4 for the full 7.5 ppm as well, potassium would be nearly doubled.

Do I really need a 50% water change every week on EI?

Yes, if you run EI standard. The method doses in slight excess on purpose, and the 50% change is the reset that keeps the excess from accumulating. At a smaller change the calculator warns you — either raise the change or drop to the low-tech style at one-third strength.

Can I use teaspoons instead of grams?

You can, but you should not rely on them. Teaspoon weights vary with grain size and how level the spoon is. A 0.01 g jewellery scale is cheap and removes the guesswork — especially for doses under half a gram, where a pinch is not a dose.

Why is one of my doses under 0.1 g?

Small tanks need small doses — 0.14 g of KH2PO4 in a 20-gallon tank is normal for EI. Weigh it on a 0.01 g scale, or mix a stock solution (for example 30 g KNO3 in 500 mL, 10 mL per dose) and dose by millilitres instead.

Will EI dosing cause algae?

Not by itself. Excess nutrients alone do not cause algae — unstable CO2 and light do. Algae in an EI tank is almost always a light or CO2 problem, so fix those before cutting doses.

EI or PPS-Pro — which should I pick?

EI is for high-light, CO2-injected, densely planted tanks: big doses three times a week, reset by a 50% water change. PPS-Pro is lean and daily, with no built-in reset — better for low- to medium-light tanks and for keepers who prefer a small daily routine. The EI Dosing Schedule page builds the EI week day by day; the PPS-Pro Dosing Calculator builds the PPS-Pro bottles.

What does the CSM+B iron number actually mean?

CSM+B is a trace mix, and iron is the proxy the whole mix is measured by — the label's 6.53% iron stands in for all the traces. The dose is set so iron lands at the target (0.2 ppm per EI dose, 0.05 ppm per PPS-Pro day); the other traces follow in proportion.

Sources

  1. Rotala Butterfly — Estimative Index and "Dosing Dry Fertilizers" (Hobby practice). rotalabutterfly.com/rex-grigg/dosing.htm
  2. Green Leaf Aquariums — EI guide (Manufacturer). greenleafaquariums.com/ferts/
  3. Barr, T. — The Estimative Index method, Barr Report / planted tank forums (Standard). No URL was on file for this source.
  4. Haynes (ed.) — CRC Handbook of Chemistry and Physics (Textbook). Molar masses and solubilities at 20 °C. No URL was on file for this source.
  5. aquariumfertilizer.com — Perpetual Preservation System (PPS-Pro) (Hobby practice). No URL was on file for this source.
  6. FishLore — EI low-tech dosing at one-third strength on alternate macro/micro days (Hobby practice). No URL was on file for this source.
  7. aquaplanet.me — EI per-dose target ranges, NO3 5–7.5, PO4 1–1.3, Fe 0.1–0.2 ppm (Hobby practice). No URL was on file for this source.

Related tools