Algae Identifier

Identification by appearance — the causes listed are the ones the hobby generally agrees on, but algae has more than one trigger, so treat the result as a starting point, not a diagnosis. The lever that fixes most algae is light: 6–8 hours a day.

Likely identification

Pick what it looks like — the likely type, what usually causes it, and what to do first appear here.

Why use this calculator?

  • Name what you are looking at — match the colour and texture to one of seven common types, from green spot to staghorn, instead of guessing from a photo.
  • See the causes the hobby generally agrees on for that type, phrased as "often linked to" — algae has more than one trigger, so the result is a starting point, not a diagnosis.
  • Get the first fix to try, with the light lever front and centre: 6–8 hours a day is the site's care baseline for light.
  • Know when to wait it out — in a tank under 2 months old most algae fades on its own as the tank matures, so new-tank algae is often a patience problem, not a chemical one.
  • See algaecides flagged as a last resort — they stress plants and fish and never fix the cause; light, nutrients and flow are the levers that actually work.

If the water itself is the problem, check it with the Water Parameter Checker — ammonia and nitrite must read 0, nitrate under 40 ppm. · Back to Stocking & Fish Care

Pick what the algae looks like and get the likely ID, what usually causes it, and what to do first. Everything runs in your browser; nothing is saved.

How it works

The identifier holds seven common types. Match the colour and texture to the closest one — colour and texture matter more than where it grows — and tell it whether the tank is under or over 2 months old. The tank age changes the advice: in a new tank most algae fades on its own as the tank matures, so the fix is patience plus light and water changes, not chemicals.

Identification by appearance. Each type is named from what it looks like: hard green dots (green spot), a soft green film (green dust), long thin strands (hair), dark tufts (black beard), a dusty brown coating (brown algae / diatoms), slimy blue-green sheets (cyanobacteria), grey branching tufts (staghorn). No identifier can be certain from a description alone — treat the result as a starting point.

Causes, phrased as "often linked to". Algae has more than one trigger, so every entry lists the causes the hobby generally agrees on, not a single proven cause. The levers that come up again and again are light, nutrients, flow and CO2 stability.

The light lever. The fix for most types starts with light: 6–8 hours a day is the site's care baseline. Cut direct sunlight, shorten the photoperiod to 6–8 hours, and only then look at nutrients and flow. Water changes run at the site's weekly baseline of 25–30%.

Worked example

Soft green film that wipes off easily, in a tank under 2 months old.

Inputs

Appearance: soft green film, wipes off the glass easily. Tank age: under 2 months (new tank).

Formula

Match appearance to type, read its usual causes, take the first fix — then apply the new-tank rule: fix light and water changes first, wait for the tank to mature.

Calculation

Soft green film = green dust algae, often linked to excess light and nutrients, very common in tanks under a few months old. First fix: wipe it off during water changes and shorten the photoperiod to 6–8 hours. New-tank rule: it often fades on its own as the tank matures — resist the urge to black out the tank for days.

Result

Green dust algae — wipe it off at water-change time, light to 6–8 hours a day, and wait: in a new tank this one usually fades on its own.

A second check shows an established-tank case. Dark grey-black tufts on leaf edges, in a tank over 2 months old: black beard algae (BBA), often linked to fluctuating CO2, poor flow and built-up organic waste. First fix: trim the worst leaves — it rarely lets go once attached — improve flow to dead spots, clean the filter, and keep CO2 stable. Spot treatments exist, but trimming and flow come first.

How to read your results

The verdict word is the likely type — "Green dust algae", for example — and the line under it says what it looks like. The stat grid shows the three levers: light 6–8 hours a day, water change 25–30%, and your tank age (under or over 2 months).

Below the stats, the rows are labelled. "Often linked to" is the usual causes — a starting point, not a diagnosis. "First fix" is the step to try before anything else, usually manual removal plus the light lever. A "New tank" row appears only for tanks under 2 months, and says what the new-tank rule is: fix light and water changes first, most of it fades on its own. "Caution" is the algaecide warning: a last resort that stresses plants and fish and never fixes the cause.

What to do next depends on the tank age. New tank: wipe or siphon it off, hold light to 6–8 hours, keep up weekly water changes, and wait for the tank to mature. Established tank: work the levers in order — light, then flow and nutrients, then CO2 stability — and re-check in a week before trying anything stronger.

Common mistakes

  • Reaching for an algaecide first. Algaecides stress plants and fish and never fix the cause — light, nutrients and flow are the levers that actually work.
  • Blacking out the tank for days. Green dust in a new tank often fades on its own as the tank matures — a blackout stresses the plants for a problem patience would have solved.
  • Cleaning the filter in tap water. Staghorn's fix is to clean the filter in old tank water — tap water kills the filter bacteria you need.
  • Scrubbing without fixing the light. Green spot comes back until the direct sunlight is cut and light is held to 6–8 hours.
  • Treating cyanobacteria like an algae. It is a bacteria, not an algae — siphon it out, increase flow, do larger water changes for a week. Antibiotics kill it but also hit your filter bacteria, so they are a last resort, not a first step.
  • Reaching for chemicals for brown algae. It is ugly, not dangerous — wipe it off, keep up weekly water changes, and let the tank mature. Nerite snails and otocinclus eat it.
  • Ignoring an ammonia spike. Staghorn is often linked to ammonia spikes and a dirty filter — test ammonia before treating the algae.

Algae types at a glance

All seven types, what each is often linked to, and the first fix to try.

TypeWhat it looks likeOften linked toFirst fix
Green spot algaeHard green dots stuck to glass and slow-growing leavesToo much direct light and low phosphate; common once a tank is establishedScrape the glass; cut direct sunlight; light to 6–8 hours; check phosphate
Green dust algaeSoft green film that wipes off the glass easilyExcess light and nutrients; very common in tanks under a few months oldWipe off during water changes; photoperiod to 6–8 hours; in a new tank, wait for it to fade
Hair / thread algaeLong thin green strands on plants, wood and decorToo much light plus excess nutrients; in planted tanks, unstable CO2Pull out by hand or wind onto a toothbrush; light to 6–8 hours; 25–30% water change; keep CO2 steady
Black beard algae (BBA)Dark grey-black tufts on leaf edges, wood and filter outletsFluctuating CO2, poor flow and built-up organic wasteTrim the worst leaves; improve flow to dead spots; clean the filter; keep CO2 stable
Brown algae / diatomsDusty brown coating that wipes off easily, mostly in new tanksSilicates in fresh water and an immature bacterial balance; fades as the tank maturesWipe off; keep up weekly water changes; nerite snails and otocinclus eat it
Blue-green algae (cyanobacteria)Slimy blue-green sheets, sometimes with an earthy smellLow nitrates, poor flow and excess organic waste — a bacteria, not an algaeSiphon it out; increase flow; larger water changes for a week; antibiotics only as a last resort
Staghorn algaeGrey branching tufts like tiny antlers, on leaves and equipmentPoor flow, ammonia spikes and a dirty filterTrim affected leaves; clean the filter in old tank water (never tap water); improve flow; test ammonia

Every row is the site's own entry, worded as "often linked to" — the causes the hobby generally agrees on, not a diagnosis.

FAQ

Why is light always the first fix?

Because it is the lever that fixes most algae, and the one you control exactly. The site's care baseline is 6–8 hours a day — cut direct sunlight, shorten the photoperiod to 6–8 hours, and only then look at nutrients, flow and CO2.

Is algae in a new tank normal?

Yes. Tanks under 2 months old grow almost every algae while the bacteria and plants settle in. Fix light and water changes first — most new-tank algae fades on its own as the tank matures.

Is brown algae dangerous?

No — it is ugly, not dangerous. Wipe it off, keep up weekly water changes, and let the tank mature. Nerite snails and otocinclus eat it; do not reach for chemicals.

Can I use antibiotics on blue-green algae?

Only as a last resort. It is a bacteria, not an algae, so antibiotics do kill it — but they also hit your filter bacteria. Siphon it out, increase flow, and do larger water changes for a week first.

How long until the algae is gone?

There is no fixed number of days in these entries — it depends on the type and the lever you fix. New-tank algae usually fades as the tank matures; established-tank algae needs the cause fixed (light, flow, CO2) and then a week or so of clean water before you judge it.

What if the water itself is the problem?

Check it with the Water Parameter Checker — ammonia and nitrite must read 0, nitrate under 40 ppm. Staghorn in particular often sits on top of an ammonia spike, so test ammonia before treating the algae.

Why is there no chemical recommendation here?

Because algaecides are a last resort: they stress plants and fish and never fix the cause. The identifier gives you the levers that actually work — light, nutrients and flow — and says so where a chemical would only hide the problem.

Sources

  1. TheCycledTank species database — care baselines: photoperiod 6–8 hours a day, water change 25–30% weekly (Our recommendation).
  2. TheCycledTank algae entries — the seven types, their usual causes and first fixes, written as identification by appearance (Our editorial entries).
  3. TheCycledTank Water Parameter Checker — the tool that tests the water first (Our tool).

Related tools