Livebearer <redacted> Calculator

Base gestation at 77 °F — temperature adjusts it below.
72–82 °F. Warmer water shortens gestation about 1.5% per °F.
What do you know?

An estimate, not a date on a calendar: gestation varies by fish, age and feeding, so expect fry a few days either side. Worked example: a platy that gave birth today, water at 80 °F → 28 × (1 − 0.015 × 3) = 26.7 → 27 days, expect fry in 27 days ± 3 days.

Due date

Pick a species, water temperature and a date — the due date and expected window appear here.

Why use this calculator?

  • Know when to plant thick cover, so fry have somewhere to hide from the first minute.
  • Stop guessing from the belly alone — temperature shifts the date by days.
  • Plan the breeder box or separate tank a week early, instead of moving her late.
  • See the whole expected window, not one day, so a drop a few days early is no surprise.

Wondering how fast the fry will add up? Try the Fish Population Growth Calculator. · Back to Stocking & Fish Care

Pick the species, water temperature and the date of her last birth (or when you noticed she was pregnant), and get her due date with the expected window — so you can plant cover a week early instead of guessing from her belly. Worked example: a platy that gave birth today, water at 80 °F, is due in 27 days ± 3 days. Everything runs in your browser; nothing is saved.

How it works

Livebearers give birth to live young on a roughly fixed cycle: one brood, then the next about one gestation later. This calculator takes the date that cycle restarted — her last birth — adds the gestation length for her species at your water temperature, and gives you the due date plus a window either side, because individual fish vary by days.

The formula. Gestation days = base × (1 − 0.015 × (T − 77)), where T is the water temperature in °F and the base is the gestation at 77 °F. Each °F warmer shortens gestation by about 1.5%; each °F cooler stretches it by the same. The formula is only used for 72–82 °F — outside that range the calculator refuses, rather than guessing.

The bases. At 77 °F: guppy 26 days, Endler's livebearer 23, platy 28, swordtail 28, molly 60. These are typical values from FishBase reproductive data for Poecilia and Xiphophorus, and from Magurran's work on the Trinidadian guppy — individual fish vary by days either side, which is what the window is for.

Two starting points. If you know the date of her last birth, the due date is that date plus the gestation. If you only know when you noticed she was pregnant, the due date is that date plus the gestation minus how many days pregnant she already looked then. Either way the window is the due date ± 3 days — ± 5 days for mollies, whose longer gestation varies more.

What it does not do. It never diagnoses anything — it describes timing only. It does not know her age, how well she is fed, or whether this is her first brood, all of which shift the real date by days. That is why the window, not the single date, is the number to plan around.

Worked example

A platy that gave birth on 11 November 2026, water at 80 °F.

Inputs

Platy · base 28 days at 77 °F · water 80 °F · last birth 11 Nov 2026.

Formula

Gestation = 28 × (1 − 0.015 × (80 − 77)). Due = last birth + gestation. Window = due ± 3 days.

Calculation

0.015 × 3 = 0.045; 28 × 0.955 = 26.74 → 27 days. 11 Nov + 27 days = 8 Dec 2026. Window: 5 Dec to 11 Dec 2026.

Result

Due around 8 Dec 2026 — expect fry between 5 and 11 Dec. Plant cover a week before, by about 1 Dec.

The other starting point works the same way. A guppy you noticed 3 days ago, who already looked about a week pregnant then: 26 − 7 − 3 = 16 days from today. The gestation is the same 26 days; you are just counting from a later point in it.

How to read your results

The big line is the due date — the middle of the expected window. Under it, the pair line names the species, the gestation in days at your temperature, and the stat grid shows the three numbers to plan around: the due date, the gestation length (with the base it was adjusted from), and the full expected window with its start and end dates.

Plan around the window, not the date. Fry can arrive any day inside it, and a drop a few days early is normal, not a problem. The practical date is a week before the window opens — that is when the cover should already be planted and the breeder box (if you use one) already in place.

The rows below the stats are the things to watch for. "OK" rows are the signs birth is near, the sperm-storage fact, and the planting and fry-feeding advice. The "Caution" row is the one warning that matters most: do not move her late.

Common mistakes

  • Trusting the belly alone. Belly size varies with feeding and brood size — the date of the last birth and the temperature are far better predictors.
  • Counting from mating instead of from birth. Female livebearers store sperm and can have several broods from one mating, months after the male is gone — a lone female can still drop fry.
  • Moving her late. Moving a heavily pregnant female can cause an early drop. Move her early if you use a breeder box, or let the plants do the work.
  • Expecting the due date to the day. Gestation varies by fish, age and feeding — the ± 3 day window (± 5 for mollies) is the honest answer, not a fudge.
  • Planting cover on the due date. Fry need hiding places from the first minute — plant thickly a week before the window opens.
  • Forgetting the temperature. A 5 °F swing shifts a platy's gestation by about 2 days — enough to miss the window if you guessed the date at the wrong temperature.
  • Assuming one brood and done. The cycle repeats roughly every gestation length — a guppy drops about every 26 days at 77 °F — so the next due date is already on its way.

Gestation by temperature

Days from one birth to the next, from this calculator's own formula — base × (1 − 0.015 × (T − 77)). Warmer water shortens every species by roughly a day per 3 °F.

Species74 °F77 °F80 °F82 °FWindow
Endler's livebearer24232221± 3 days
Guppy27262524± 3 days
Platy29282726± 3 days
Swordtail29282726± 3 days
Molly63605756± 5 days

Mollies run about twice as long as the rest — 60 days at 77 °F against 23–28 — and their window is wider for the same reason: a longer gestation has more room to vary.

FAQ

How accurate is the due date?

Within the window: ± 3 days for guppies, endlers, platies and swordtails, ± 5 for mollies. Gestation varies by fish, age and feeding, so a female can drop a few days either side of the date — the window is the honest answer.

What if I don't know the date of her last birth?

Use the "Date I noticed she was pregnant" option, and your best guess of how many days pregnant she already looked on that date — from her belly and gravid spot. The calculator subtracts those days from the gestation, so the date is only as good as the guess.

Can a lone female still have fry?

Yes. Female livebearers store sperm and can have several broods from one mating, months after the male is gone. A lone female dropping fry is normal, not a mystery.

What temperature is best for gestation?

The calculator works for 72–82 °F, with 77 °F as the base. Warmer water shortens gestation by about 1.5% per °F — a platy goes from 29 days at 74 °F to 26 at 82 °F — and cooler water stretches it. Keep the temperature steady rather than chasing a shorter gestation.

What are the signs birth is near?

The dark gravid spot near the vent grows and darkens, her belly looks square from the front, and on the last day she may hide, hover near the heater and breathe faster. Those signs beat the calendar for the final day.

Should I move her to a breeder box?

Only if you move her early. Moving her late can cause an early drop. If the window is already open, leave her where she is and let thick planting protect the fry — fine-leaved plants or moss, in place a week before the due date.

How often will she have fry?

Roughly every gestation length — a guppy about every 26 days at 77 °F, a molly about every 60. The next due date is the last birth plus the gestation, so you can run the calculator again the day she drops.

What do I feed the fry?

Small and often — crushed flakes or baby brine shrimp, 3–5 times a day. Fry grow fast and have small stomachs, so little meals beat one big one.

Sources

  1. Froese & Pauly (eds.), FishBase — reproductive data for Poecilia and Xiphophorus species (Standard). fishbase.org
  2. Magurran, A. E., Evolutionary Ecology: The Trinidadian Guppy, Oxford University Press, 2005 — guppy reproduction and life history (Textbook).
  3. TheCycledTank — the gestation bases (guppy 26, endler 23, platy 28, swordtail 28, molly 60 days at 77 °F), the 1.5%-per-°F adjustment for 72–82 °F, and the ± 3 day window (± 5 for mollies) (Our method).

Related tools