Fish Population Growth Calculator

About 10% in a community tank, 30% with dense plants, 70% in a breeder box.
1–24 months. A month counts as 30 days.

A simulation, not a prediction: every female gives a brood each gestation period, half the surviving fry are female, and daughters start breeding one gestation after maturing. Adults are assumed never to die and nothing is culled, so this is a ceiling to plan against.

How fast will they multiply?

Pick a species and enter the starting fish, fry survival and months ahead — the month-by-month projection appears here.

Why use this calculator?

  • See the explosion before it happens — growth looks slow for 4 months, then compounds.
  • Plan rehoming early, while the numbers are still small enough to place.
  • Compare survival rates: plants vs a breeder box change the outcome by thousands.
  • Decide whether an all-male tank is the right call before buying females.

Check whether the tank can hold them with the Minimum Tank Size Calculator and the Tank Stocking Calculator. · Back to Stocking & Fish Care

Pick the species, starting males and females, fry survival and months ahead, and see a month-by-month projection of how fast livebearers multiply — so you can plan rehoming before the tank is overrun. A ceiling to plan against, not a prediction. Everything runs in your browser; nothing is saved.

How it works

The calculator runs a day-by-day brood projection. The species numbers come from the table below — typical values from FishBase and from Magurran's work on the Trinidadian guppy (see Sources).

Each brood. Every female gives a brood every gestation period (G days): starting females brood on day G, 2G, 3G, and so on. Each brood is B fry × survival rate, and half the surviving fry are female.

Daughters join in. A daughter born on day b matures at b + M days and gives her first brood at b + M + G, then every G days after that. For about 4 months only the starting females breed — once daughters join in, growth compounds.

The total. Total = starting fish + all surviving fry. Fry counts are kept fractional inside the projection and rounded only for display. A month counts as 30 days.

The assumptions, stated plainly. Adults are assumed never to die and nothing is culled, so this is a ceiling to plan against, not a prediction. Real tanks never reach these numbers: adults age and die, fry get eaten, and crowding and poorer water slow breeding.

What changes the answer. Three things: the species (brood size, gestation, maturity), the number of starting females, and the fry survival rate. Survival is the lever you control — about 10% in a community tank with hungry adults, 30% with dense plants, 70% if fry or pregnant females are moved to a breeder box or a separate tank.

Worked example

1 male + 2 female guppies, 30% fry survival, 3 months (90 days).

Inputs

Guppy: 20 fry per brood, 26-day gestation, matures at 90 days. Starting fish: 1 male + 2 females. Fry survival: 30%. Horizon: 3 months = 90 days.

Formula

Broods on days 26, 52, 78. Each brood: 2 females × 20 fry × 30% = 12 surviving fry. Daughters first breed on day 26 + 90 + 26 = 142 — after this horizon.

Calculation

3 broods × 12 fry = 36 surviving fry. Total = 3 starting fish + 36 fry = 39 fish. Monthly totals: 15 after month 1, 27 after month 2, 39 after month 3.

Result

39 fish after 3 months. The same trio reaches 183 fish after 6 months and 3,939 after 12 months — growth looks slow for 4 months, then compounds once the daughters start breeding on day 142.

The other species at the same starting point (1 male + 2 females, 30% survival, 3 months): Endler's livebearer 21 fish, platy 48, swordtail 57. Mollies are slower to start — their first brood comes on day 60, so after 1 month the total is still 3, and after 2 months it is 27.

How to read your results

The headline is the projected total: "About 39 fish after 3 months". Under it, the stocking line names the species, the starting males and females, and the survival rate, and the stat grid shows the three numbers behind the projection: the starting fish, the surviving fry per female per brood, and the day the first daughters start breeding.

Below the stats, the month-by-month table shows the total at the end of each month. Read it as a curve, not a list: the numbers stay small while only the starting females breed, then jump once the daughters join in. For guppies that turn comes around day 142 — about 4–5 months in.

Below the table, the checks are grouped. "Caution" is the rehoming warning — plan it early, while the numbers are still small enough to place. "OK" rows are the first-daughters note, the survival guide, and the control options.

What to do next: if the 12-month number shocks you, it is doing its job. Decide now — rehome early, move fry to a breeder box only if you want more of them, or keep an all-male tank next time. And check whether the tank can hold them with the Minimum Tank Size Calculator and the Tank Stocking Calculator.

Common mistakes

  • Reading the projection as a prediction. It is a ceiling: adults never die and nothing is culled in the maths. Real tanks never reach these numbers — but plan against the ceiling, not the hope.
  • Waiting to plan rehoming. Growth looks slow for 4 months, then compounds — by the time the tank looks full, the numbers are already past placing.
  • Forgetting the daughters. The first broods are small; the explosion starts when the daughters mature (day 142 for guppies) and start breeding too.
  • Assuming 70% survival is the default. 70% needs a breeder box or a separate tank. In a community tank with hungry adults, about 10% of fry survive.
  • Buying females to "keep just a few". One female guppy gives a brood every 26 days, and her daughters breed too — a trio is 39 fish in 3 months and 3,939 in 12 at 30% survival.
  • Keeping only females and assuming no fry. Females store sperm for months — females never exposed to a male are the safe version, and even then only if they truly never met one.
  • Forgetting the waste. Each generation adds waste, so test nitrate more often as numbers grow.

Species numbers

The numbers this calculator runs on — brood size (B), gestation (G) and maturity (M) for each livebearer. Typical values from FishBase and Magurran (2005).

SpeciesBrood size (fry)Gestation (days)Maturity (days)First daughters breed (day)
Endler's livebearer102375121
Guppy202690142
Molly4060180300
Platy2528120176
Swordtail3028150206

First daughters breed on day G + M + G. A month counts as 30 days in the projection.

Projection table — guppies, 1 male + 2 females

Total fish after 3, 6, 9 and 12 months at three fry-survival rates. The same starting trio, three very different endings — survival is the lever.

Months10% survival30% survival70% survival
3153987
639183759
91077714,595
123153,93936,627

Month by month at 30% survival: 15, 27, 39, 51, 99, 183, 315, 471, 771, 1,575, 2,523, 3,939. Notice the jump after month 4, when the first daughters start breeding.

FAQ

Will my tank really have 3,939 guppies in a year?

No — that is the ceiling, not a prediction. The projection assumes adults never die and nothing is culled. In a real tank, adults age and die, fry get eaten, and crowding and poorer water slow breeding. The number is there so you plan rehoming before the tank is overrun, not so you believe it literally.

Why does nothing happen for the first few months?

Because only the starting females breed at first. The daughters need time to mature (90 days for guppies) plus one gestation (26 days) before their first brood — day 142. Until then, growth is slow and steady; after that, it compounds.

What survival rate should I use?

About 10% in a community tank with hungry adults, 30% with dense plants, 70% if fry or pregnant females are moved to a breeder box or a separate tank. If you are unsure, run the projection at 30% — and look at the 70% column too, so a lucky month does not catch you out.

How do I stop the growth?

An all-male tank never overpopulates — and males are the colourful ones. Or keep only females never exposed to a male, remembering they store sperm for months. Removing fry by hand is not a plan; it is a chore that never ends.

Why do mollies grow slower than guppies?

Two reasons: a longer gestation (60 days vs 26) and later maturity (180 days vs 90). The first daughters of a molly do not breed until day 300 — about 10 months in. The broods are bigger (40 fry), but they come far less often.

What if I start with no females?

The population cannot grow — the total stays at the starting fish. The same is true at 0% fry survival: no surviving fry, no growth.

What does "a month counts as 30 days" change?

Very little: it fixes the horizon so months and brood days line up. A 3-month projection runs to day 90, a 12-month one to day 360. Broods land on gestation-day multiples (26, 52, 78…), not on month boundaries.

Sources

  1. Froese & Pauly (eds.), FishBase — brood sizes, gestation and age at maturity for Poecilia and Xiphophorus (Standard). fishbase.org
  2. Magurran, A. E., Evolutionary Ecology: The Trinidadian Guppy, Oxford University Press, 2005 (Textbook).
  3. TheCycledTank population data — the species table this calculator runs on (Our recommendation).

Related tools