Pick your plant and tank depth and get the PAR target to aim for at the substrate, plus a 6–8 hour photoperiod. This planner tells you what to aim for — check the fixture's PAR chart at your depth before buying. Everything runs in your browser; nothing is saved.
How it works
PAR — photosynthetically active radiation — is the light plants can actually use, measured in µmol/m²/s. This planner maps your plant to one of the widely used hobby light bands at the substrate: low light 15–30, medium light 30–50, high light 50+ µmol/m²/s. The target is measured at the substrate, where the plants are — not at the surface, and not on the box.
Depth. PAR falls with depth — roughly with the square of the distance in water — so the deeper the tank, the more of the band you need and the more the fixture's PAR-at-depth chart matters. Over 18 in deep, aim for the top of the band and check the chart at your depth, not at the surface. Over 24 in deep, check the chart at your exact depth: a light that is fine on a shallow tank may not reach the target down there.
Photoperiod. 6–8 hours a day is the site's own care baseline. Start at 6 hours and work up to 8 only if the plants are growing and algae stays away.
What it does not do. This planner does not estimate what a fixture puts out. It tells you what to aim for, so you can check a fixture's published PAR chart at your depth before buying.
Worked example
Java Fern in a tank 18 in deep.
Plant: Java Fern. Depth: 18 in.
Plant → light band. Target PAR at the substrate = the band. Photoperiod 6–8 hours a day.
Java Fern is a low-light plant → 15–30 µmol/m²/s. 18 in is not over 18 in, so no depth caution applies. Photoperiod 6–8 hours.
Aim for 15–30 µmol/m²/s at the substrate, 6–8 hours a day.
The opposite case shows what high light demands. Monte Carlo at the same 18 in depth is a high-light plant → 50+ µmol/m²/s — and high light only works with CO₂ and regular fertiliser. Without them the extra light mostly grows algae, so if you are not running CO₂, pick medium-light plants instead.
How to read your results
The verdict word is the target PAR band. Under it, the plant line names your plant and its band. The stat grid shows the three numbers that decide the purchase: target PAR, photoperiod, and depth.
A high-light result shows in amber — a Caution, not an error. It means the band only works with CO₂ and regular fertiliser; the "How to fix it" list says so before you buy. A low- or medium-light result shows in green.
The depth stat carries its own note: over 18 in, aim for the top of the band; over 24 in, check the fixture's PAR chart at your exact depth. The headline number on the box is usually measured much closer to the light, so it is not the number to compare against.
What to do next: take the target band to the fixture's published PAR chart, find your depth on it, and buy the light that reaches the band there. If the fixture has no PAR chart, do not buy on wattage or the headline number alone.
Common mistakes
- Buying on the headline number or wattage instead of the PAR chart at your depth.
- Giving low-light plants more light. It does not make them grow faster — it grows algae.
- Running high light without CO₂ and fertiliser, then blaming the plants for the algae.
- Starting at an 8-hour photoperiod. Start at 6 hours and work up only if the plants grow and algae stays away.
- Ignoring depth. A light that is fine on a shallow tank may not reach the target in a tank over 24 in deep.
- Treating this planner as a measurement of a fixture. It gives the target; the fixture's PAR chart gives the measurement.
- Chasing the top of the band for low-light plants. The middle of the band is the target, not the minimum.
Plants, bands and targets
The plants this planner knows, their bands, and the PAR to aim for at the substrate. Photoperiod is 6–8 hours a day for all of them.
| Plant | Band | Target PAR | CO₂ |
|---|---|---|---|
| Java Fern | Low | 15–30 µmol/m²/s | Not needed |
| Anubias | Low | 15–30 µmol/m²/s | Not needed |
| Crypts (Cryptocoryne) | Low | 15–30 µmol/m²/s | Not needed |
| Stem plants | Medium | 30–50 µmol/m²/s | — |
| Monte Carlo | High | 50+ µmol/m²/s | Needed |
| Dwarf Baby Tears (HC Cuba) | High | 50+ µmol/m²/s | Needed |
— means the tool records no CO₂ note for that band. High light is the only band that needs CO₂ and regular fertiliser; low-light plants do fine without CO₂.
FAQ
What is PAR?
Photosynthetically active radiation — the light plants can actually use, measured in µmol/m²/s. This planner gives the target PAR at the substrate, where the plants are.
Why measure at the substrate?
PAR falls with depth — roughly with the square of the distance in water. A fixture's headline number is usually measured much closer to the light, so it says little about what reaches the bottom of your tank.
What if my tank is over 24 in deep?
Check the fixture's PAR chart at your exact depth, and aim for the top of the band. A light that is fine on a shallow tank may not reach the target down there.
Do low-light plants grow faster under a stronger light?
No. Low-light plants do fine without CO₂, and more light than their band does not make them grow faster — it grows algae.
Do I need CO₂ for high light?
Yes. High light only works with CO₂ and regular fertiliser. If you are not running CO₂, pick medium-light plants instead.
How long should the lights be on?
Start at 6 hours a day and work up to 8 only if the plants are growing and algae stays away. The site baseline is 6–8 hours a day.
Does this planner measure my fixture?
No. It tells you what PAR to aim for at the substrate. Check the fixture you are considering against its published PAR chart at your depth, and buy the one that reaches the band there.
Sources
No URLs are on file for these sources; they are listed by name.
- 2hr Aquarist — PAR guidance for planted tanks, including the low / medium / high light bands at the substrate (Hobby practice).
- Tropica — light guides for planted aquariums (Hobby practice).
- TheCycledTank species database — photoperiod baseline of 6–8 hours a day (care_baselines.photoperiod_hours) (Our recommendation).