By TheCycledTank Editorial Team · Last updated: October 2026
If you only ever learn three water parameters, make it these three. Ammonia, nitrite, and nitrate are the nitrogen cycle made visible — and together they tell you almost everything about whether your tank is safe right now. If you haven't read our cycling guide yet, start there; this is its companion piece, the "how to read the dashboard" manual.
The cheat sheet
| Parameter | Target in a cycled tank | Act now if… |
|---|---|---|
| Ammonia | 0 ppm | A confirmed reading above 0 (rule out the phantom 0.25 and post-Prime false positives first — see testing section) |
| Nitrite | 0 ppm | Any confirmed reading above 0 |
| Nitrate | Below 40 ppm (below 20 for sensitive species) | Above ~40 ppm — but note this is a rule of thumb, not a cliff edge (see below) |
Keep those three targets in mind and you're most of the way there. Everything below is why those numbers are what they are, and what to do when they aren't.
Ammonia: the one with two faces
Here's something most guides gloss over: your test kit doesn't measure what you think it measures. It measures total ammonia — two different chemicals added together:
- NH₃ (free or "unionized" ammonia) — the killer. Burns gills, damages organs, lethal in tiny amounts.
- NH₄⁺ (ammonium) — the same nitrogen wearing a different chemical outfit. Far less toxic.
The split between them is decided by your pH and temperature. Higher pH and warmer water push more of the total into the toxic NH₃ form — and the shift is dramatic. Roughly speaking, every 1.0 rise in pH multiplies the toxic fraction about tenfold:
| Temp | pH 6.5 | pH 7.0 | pH 7.5 | pH 8.0 | pH 8.5 |
|---|---|---|---|---|---|
| 20 °C / 68 °F | 0.13% | 0.40% | 1.24% | 3.81% | 11.2% |
| 25 °C / 77 °F | 0.18% | 0.57% | 1.77% | 5.38% | 15.2% |
| 30 °C / 86 °F | 0.25% | 0.80% | 2.48% | 7.45% | 20.3% |
Percent of total ammonia present as toxic NH₃. Calculated from the Emerson et al. (1975) equilibrium relationship; values cross-checked against thekrib.com's ammonia toxicity table (compiled from EPA 1985 data) and theaquariumwiki's version. The three sources agree to within rounding — thekrib's table has one apparent typo at pH 8.0/20 °C (8.82%), where the chemistry and the other tables give ~3.8%.
Read that table sideways and the practical point jumps out: the same 1 ppm reading on your test kit is a minor concern at pH 6.5 and a genuine emergency at pH 8.5. This is why two people can post the same test result online and get completely different advice — and why "my ammonia is 1 ppm, is that bad?" has no answer without knowing the pH.
How bad is bad? Research on zebrafish — a lab model species, so treat these as zebrafish-specific and indicative rather than universal — puts long-term safe below 0.02 ppm of NH₃ (the toxic form, not the test-kit total), with 0.05–0.2 ppm causing gill damage and anything above 0.2 potentially lethal. Older aquaculture work found ~1 ppm NH₃ lethal to adult fish and 0.2–0.3 ppm lethal to larvae, with chronic damage starting around 0.03–0.05 ppm. In a cycled home tank, though, the target is simpler: 0 ppm total ammonia, always. If your tank is cycled and you see ammonia, something changed — overfeeding, a dead fish hidden behind decor, a filter that got cleaned too aggressively.
Nitrite: the silent suffocator
If ammonia burns from the outside, nitrite kills from the inside. Nitrite slips through the gills into the bloodstream and converts hemoglobin — the molecule that carries oxygen — into methemoglobin, which can't carry oxygen at all. The condition is called methemoglobinemia, or "brown blood disease" (gills turn brown instead of red). In effect, the fish suffocates even in well-oxygenated water — extra aeration barely helps, because the problem isn't oxygen in the water, it's blood that can't use it.
A nuance worth having: tolerance varies a lot by species. The landmark review of nitrite toxicity (Lewis & Morris, 1986, covering ~40 studies) found salmonids among the most sensitive and largemouth bass/bluegill among the least — bass barely concentrate nitrite at all. Air-breathing species like striped catfish shrug off levels that would kill a trout. So treat the numbers below as applying to typical community fish; if you keep sensitive species, be more conservative, not less.
The working numbers: 0 ppm is the only acceptable level in a home tank. Measurable stress shows up around 0.75 ppm; above 5 ppm is acutely toxic and can kill fast. Those thresholds come from hobby and extension guides summarizing the toxicology literature — the underlying research (e.g., Lewis & Morris 1986; Wedemeyer & Yasutake 1978 on steelhead trout) measured lethal concentrations far higher in lab conditions, but home aquarists shouldn't flirt with fractions of those.
When does nitrite show up? Mid-cycle (it's the middle step), or any time your bacterial colony takes a hit — certain medications, a deep gravel vacuum that went too far, a filter left off overnight. If it appears in a mature tank, treat it as a symptom: the reading is the alarm, the cause is whatever disturbed your biofilter.
One thing that genuinely helps in a nitrite emergency: salt. Chloride ions compete with nitrite for uptake at the gills' chloride cells — this is one of the best-established findings in the nitrite literature (Lewis & Morris 1986; lab work shows added NaCl cutting acute toxicity several-fold). The commonly cited emergency dose is 1 teaspoon of aquarium salt per gallon — that's the hobby's standard figure (via ELC's summary, not from a primary paper; what's peer-reviewed is the chloride-competition mechanism behind it). Dissolve it in tank water first and add gradually over a few hours. Use plain aquarium salt, not iodized table salt. Two caveats: skip it or go lighter with scaleless fish (corydoras, loaches, many plecos) and invertebrates, which handle salt poorly — and some live plants dislike it too. It's a bridge, not a fix — you still need water changes and the root cause.
In severe cases, methylene blue can reverse methemoglobinemia directly (Wedemeyer & Yasutake 1978 found it effective in steelhead trout) — but it stains silicone and decor blue and can harm your biofilter bacteria, so treat it as a last resort and follow the product's dosing exactly.
Nitrate: the "safe-ish" one
Nitrate is the end of the line — far less toxic than the other two, removed by water changes or eaten by plants. But "less toxic" isn't "harmless."
Chronic high nitrate doesn't kill dramatically. It grinds fish down: faded colors, slow growth, wounds that won't heal, and a maddening pattern of ich, fungus, or fin rot that keeps coming back no matter what you treat with. If your fish "look fine but keep getting sick," test nitrate before you buy another bottle of medication.
Targets: below 40 ppm for a general community tank, below 20 ppm for sensitive species or breeding tanks. Be honest about what those numbers are: a hobby convention, not a hard toxicological cliff. No study says 39 ppm is safe and 41 is dangerous — the guidance (summarized well by the Environmental Literacy Council) reflects that chronic problems get more likely as nitrate climbs, with ~80 ppm as the "definitely act now" zone. Above ~80 ppm, act. The fix is beautifully simple math — nitrate only leaves through water changes (or plants), and a 50% water change removes 50% of it. If you're at 80 ppm and want 20, that's two 50% changes.
Plants are the other exit ramp. Fast-growing stem plants and floaters drink nitrate directly, which is why heavily planted tanks can go longer between changes. They're not a substitute for testing, though — they'll happily mask a rising trend until something else breaks.
Testing without fooling yourself
Liquid kits beat strips. The API Freshwater Master Kit (or equivalent) is the hobby standard for a reason — strips are fine for a quick sanity check, but their color blocks are coarse and they expire fast in humidity. Whatever you use, check the expiry date; old reagents lie.
Test at the same time of day if you're tracking a trend. pH swings through the day in planted tanks (CO₂ drops as plants photosynthesize, pH rises), which changes how dangerous a given ammonia reading is even when the number looks identical.
The phantom 0.25 ppm. API's ammonia test is famous for showing 0.25 ppm when there's effectively nothing there — a widely reported quirk of the kit. Quick check: test your tap water (treated with dechlorinator). If it also reads 0.25, that's your kit's zero, not your tank's problem. Don't chase a ghost with chemicals.
The nitrate test needs a workout. API's nitrate test is notorious for reading falsely low if you don't shake bottle #2 hard — really hard, a full 30 seconds, bang it on the table. The reagents settle and separate; a gentle swirl gives you a comforting 5 ppm while the real number is 40. This is one of the most widely reported test-kit quirks in the hobby. When in doubt, shake harder than feels reasonable and retest.
Conditioners can fool tests too. Seachem Prime — the hobby's most popular water conditioner — detoxifies ammonia by binding it into a less toxic form for 24–48 hours. That's real and useful in an emergency. But salicylate-based test kits can't tell bound ammonia from free ammonia, so you can get an alarming reading from water your fish are actually fine in. (Seachem sells Prime, so take the marketing copy with the usual grain of salt — the detox effect is temporary, and it doesn't replace fixing the cause.) Test before dosing conditioner when you want the truth.
During cycling, test daily. In a mature tank, weekly is plenty — unless something looks off, in which case test immediately. Your fish's behavior is the fastest test kit you own: gasping, lethargy, clamped fins, or rubbing against decor all say "test the water now."
"My reading is bad — now what?"
Don't panic, and don't dump five products in at once. Work the list:
- Big water change, right now. 30–50%, temperature-matched, dechlorinated. This is the single most effective emergency action for all three parameters. Retest after.
- Stop feeding for a day or two (healthy fish handle this fine), and remove anything rotting — uneaten food, dead plant leaves, a hidden casualty.
- Prime or equivalent as a bridge — it buys 24–48 hours of reduced toxicity while you fix the cause. It's a bandage, not a cure.
- For nitrite specifically, aquarium salt at 1 tsp/gal (dissolved, gradual — see nitrite section for dose and caveats).
- Find the cause. New fish added all at once? Filter media replaced? Medication dosed? The spike is a symptom — if you don't find the cause, it'll be back next week.
What not to do: don't "fix" pH during an ammonia spike. Raising pH converts harmless ammonium into toxic ammonia — you can turn a manageable situation lethal in minutes. Handle the ammonia first, argue with pH later.
The tap water trap
If your water company uses chloramine (chlorine bonded to ammonia — very common), your dechlorinator breaks that bond and releases ammonia into your tank with every water change. Good conditioners (Prime included) then bind that ammonia — but cheap basic dechlorinators may not, leaving you with a mystery ammonia reading after every change. If your tap tests positive for ammonia straight from the faucet, this is probably why. It's normal, it's manageable, and now you know.
Quick answers
My tank is cycled but nitrate keeps climbing between changes — normal? Completely. Nitrate is the end product; it accumulates until you remove it. If it's climbing faster than your schedule handles, change more water, feed less, or add fast-growing plants.
Can nitrate ever hit zero? In a heavily planted tank with light stocking, yes — plants can drink it as fast as it's made. In most tanks, no, and that's fine. Zero isn't the goal; low and stable is.
Do I need to test pH too? Yes — at least while you're learning your tank. As the ammonia table above shows, pH is what turns a test-kit number into an actual danger level. Once you know your tap and tank pH are stable, it becomes a monthly check.
Is 0.25 ppm ammonia an emergency? Read the section above first — confirm it's real (not the phantom reading, not post-Prime). If it's real ammonia at pH 7.5+, do a water change today. At pH 6.5 it's less urgent but still means something's off in a cycled tank.
Does this apply to saltwater tanks? The nitrogen cycle works the same — ammonia to nitrite to nitrate — and the toxicity chemistry is the same too (in fact, higher pH in marine tanks means a larger share of any ammonia reading is the toxic NH₃ form, so marine keepers should be more cautious about small readings, not less). The targets above are written for freshwater; reef tanks often run much lower nitrate targets (single digits) because corals are sensitive. We'll cover the saltwater specifics in our reef pillar.
Where this comes from
- Emerson, K. et al. (1975). Aqueous ammonia equilibrium calculations. Water Research — the pKa/temperature relationship behind the NH₃ table (primary source).
- Lewis, W.M. Jr. & Morris, D.P. (1986). Toxicity of nitrite to fish: a review. Transactions of the American Fisheries Society 115:183–195. DOI: 10.1577/1548-8659(1986)115<183:TONTF>2.0.CO;2 — the landmark nitrite review (~40 studies): methemoglobin mechanism, chloride competition at gill chloride cells, species sensitivity spectrum (salmonids most sensitive; bass/bluegill least).
- Wedemeyer, G.A. & Yasutake, W.T. (1978). Prevention and treatment of nitrite toxicity in juvenile steelhead trout. J. Fisheries Research Board of Canada 35:822–827 — NaCl/CaCl₂ reduced acute nitrite toxicity several-fold; methylene blue effective against methemoglobinemia. https://pubs.usgs.gov/publication/70162257
- The Krib / Neil Frank — "Ammonia Toxicity to Freshwater Fish," compiling EPA (1985) data into the pH/temperature table. https://www.thekrib.com/Chemistry/ammonia-toxicity.html
- ConductScience zebrafish ammonia thresholds (<0.02 ppm NH₃ safe; 0.05–0.2 dangerous; >0.2 lethal) — lab-research reference values; ConductScience is a lab-supply company, cited for the numbers not as an authority.
- Hütter (1990), via FishLore forum compilation — lethal ~1 mg/L NH₃ at 15 °C; larvae 0.2–0.3; chronic damage 0.03–0.05. Forum-sourced; treat as indicative, not primary.
- Environmental Literacy Council — nitrite/nitrate target ranges, Prime's detox-vs-removal distinction and false-reading behavior, salt dosing guidance (1 tsp/gal emergency dose). https://enviroliteracy.org/
- DBC Aquatics — ammonia/nitrite/nitrate poisoning symptoms and the pH-swing mechanism in planted tanks (hobbyist source; mechanisms align with the chemistry above). http://dbcaquatics.com/ammonia-nitrite-nitrate-cycle-3/
- Seachem (via product documentation) — Prime detoxifies ammonia/nitrite/ nitrate for ~24–48 hours without removing them. Commercial source; claims described as the manufacturer states them.