Aquarium Salt Treatment Calculator

Check before you dose

Loaches, catfish, shrimp and live plants are salt-sensitive. Dissolve the salt in tank water first, add it gradually over hours, and replace salt only for changed water — never for top-off evaporation. If fish worsen, seek advice from an aquatic veterinarian.

Water in the tank, not the label size

Grams use about 17.5 g per level tablespoon of aquarium salt (sources quote 15–18 g depending on grain size), so the tablespoon count is the number to trust. 1 tablespoon = 3 teaspoons.

Your salt dose

Enter your tank's actual water volume and a treatment level — the salt appears here in tablespoons, grams and teaspoons.

Why use this calculator?

  • The correct therapeutic level for the tank you actually have.
  • No guessing with capfuls — tablespoons, grams and teaspoons together.
  • Species warnings before you dose, not after the damage.
  • A reminder to replace salt only for changed water, so the level never creeps up.

Describe what you are seeing first with the Symptom Explorer, or check the water itself with the Water Parameter Checker. · Back to Water Chemistry

Enter your tank's actual water volume and a treatment level, and get the salt in tablespoons, grams and teaspoons. The correct therapeutic level, with the species warnings before you dose — no guessing with capfuls. Everything runs in your browser; nothing is saved.

How it works

This tool does the arithmetic for a level you have chosen. It does not diagnose a disease, and it does not recommend a treatment — if fish worsen, seek advice from an aquatic veterinarian. The three levels are the hobby's usual ones, by tablespoons per US gallon of actual water:

Level 1 Tonic — 1 tbsp per 5 gal (0.2 tbsp/gal). Level 2 Mild — 1 tbsp per 2.5 gal (0.4 tbsp/gal). Level 3 Ich — 1 tbsp per gal (1 tbsp/gal).

Tablespoons = gallons × tbsp per gallon. Grams ≈ tablespoons × 17.5. Teaspoons = tablespoons × 3.

Grams use about 17.5 g per level tablespoon — the midpoint of the 17–18 g range sources quote, with one source quoting about 15 g. The true weight varies with grain size, so grams are shown as a 17–18 g per tablespoon range and the tablespoon count is the number to trust. A kitchen scale beats any spoon when the dose is large.

As concentrations, the three levels work out to about 0.09%, 0.19% and 0.46% (0.9, 1.9 and 4.6 g per litre, at 17.5 g per tablespoon; 1% = 10 g of salt per litre). Note the top level sits above the 0.2–0.3% range guides cite for ich over a 10–14 day hold — see Common mistakes.

Salt stays in the tank until you change water — it does not evaporate. Top off evaporation with plain fresh water, and replace salt only for the water you actually changed. Dissolve the salt in tank water first, add it gradually over hours, and never drop dry salt onto fish or plants.

Worked example

A 20-gallon tank (actual water) at Level 2 Mild — 1 tablespoon per 2.5 gallons.

Inputs

Tank 20 gal (actual water) · Level 2 Mild (1 tbsp / 2.5 gal).

Formula

Tablespoons = 20 × (1 ÷ 2.5). Grams = tablespoons × 17.5. Teaspoons = tablespoons × 3.

Calculation

20 ÷ 2.5 = 8 tbsp. Grams = 8 × 17.5 = 140 g (range 8 × 17–18 = 136–144 g). Teaspoons = 8 × 3 = 24 tsp.

Result

8 tablespoons — about 136–144 g, 24 teaspoons, Level 2 Mild.

The same tank at the other levels: Level 1 Tonic gives 4 tablespoons, 70 g (20 ÷ 5 = 4; 4 × 17.5 = 70). Level 3 Ich gives 20 tablespoons, 350 g (20 × 1 = 20; 20 × 17.5 = 350).

How to read your results

The headline is the tablespoons — that is the number to trust, because grams vary with grain size. The stat grid gives the same dose three ways: tablespoons, grams as a range (with the 17.5 g midpoint underneath), and teaspoons.

The pair line names the level and the rate it used, so you can check it against the level you meant to pick. Below the stats, the level row says what that level means: Tonic is the gentlest dose; Mild is a real treatment dose to watch closely for the first day; Ich is the strongest of the three, only for stock that tolerates salt.

The last row is the one people forget: replace salt only for changed water, never for top-off evaporation. Topping off with fresh water keeps the salt in the tank, and adding more each time creeps the level up.

Common mistakes

  • Dosing by label gallons instead of actual water. Substrate, rock and decor displace water — measure the water, not the sticker.
  • Adding salt for top-off water. Evaporation leaves salt behind; only replace salt for the water you actually changed.
  • Dropping dry salt onto fish or plants. Dissolve it in tank water first and add it gradually over hours.
  • Dosing salt-sensitive stock. Loaches, catfish, shrimp, snails and most live plants struggle with salt — treat sensitive fish in a separate tank where possible.
  • Assuming the Ich level is mild because it is "just a tablespoon per gallon". It works out to about 0.46% (4.6 g/L), above the 0.3% figure guides cite as the strongest level most freshwater fish tolerate over a 10–14 day hold. It is for salt-tolerant stock only, added gradually, with close watching — and an aquatic vet if fish worsen.
  • Using the wrong salt. Plain sodium chloride only — aquarium salt, kosher salt, or non-iodised rock/pickling salt. Avoid table salt with anti-caking agents or iodine, and never use marine reef salt for a freshwater treatment.
  • Treating the display tank when a hospital tank would do. Sensitive plants and invertebrates should come out first where possible.

Salt by tank size

Tablespoons and grams for each level, from the tool's own maths (grams at 17–18 g per tablespoon; the tablespoon count is the number to trust). The % column is the level's concentration at 17.5 g per tablespoon.

Tank (actual water)Level 1 TonicLevel 2 MildLevel 3 Ich
5 gal1 tbsp · 17–18 g2 tbsp · 34–36 g5 tbsp · 85–90 g
10 gal2 tbsp · 34–36 g4 tbsp · 68–72 g10 tbsp · 170–180 g
20 gal4 tbsp · 68–72 g8 tbsp · 136–144 g20 tbsp · 340–360 g
40 gal8 tbsp · 136–144 g16 tbsp · 272–288 g40 tbsp · 680–720 g

Concentrations: Tonic ≈ 0.09% (0.9 g/L), Mild ≈ 0.19% (1.9 g/L), Ich ≈ 0.46% (4.6 g/L).

FAQ

How much aquarium salt per gallon?

It depends on the level: 1 tablespoon per 5 gallons (Tonic), 1 per 2.5 gallons (Mild), or 1 per gallon (Ich). Enter your actual water volume and the level, and the calculator gives tablespoons, grams and teaspoons.

What concentration treats ich?

This tool's Ich level is 1 tablespoon per gallon, which works out to about 0.46% (4.6 g/L). Guides cite 0.2–0.3% for ich over a 10–14 day hold, so this level sits above that figure — use it only for salt-tolerant stock, add it gradually, watch the fish closely, and ask an aquatic vet if they worsen. This tool does the arithmetic for a level you choose; it does not diagnose or prescribe.

Does salt evaporate?

No — salt stays in the tank until you change water. Top off evaporation with plain fresh water, and add salt only for the water you replaced. Adding salt at every top-off creeps the level up.

Which fish and plants can't take salt?

Loaches, scaleless catfish, shrimp, snails and most live plants struggle with salt, as do soft-water tetras. Keep them at 0.1% or less, or use a separate hospital tank for the treatment.

What kind of salt should I use?

Plain sodium chloride with nothing added — aquarium salt, kosher salt, or non-iodised rock/pickling salt. Avoid table salt with anti-caking agents or iodine, and never use marine reef salt for a freshwater treatment.

How do I re-dose after a water change?

Add salt only for the water you replaced: replaced gallons × the level's tablespoons per gallon. A 5-gallon change on a tank held at Mild (0.4 tbsp/gal) takes 2 tablespoons for the new water — not a full-tank dose.

How does a salt dip work?

A dip is a short bath in a stronger solution in a separate container — typically 1–3%, with tank water and an air stone — for a few minutes at most. This tool calculates tank levels only; it has no dip mode, and a dip is not a tank dose, so do not use the tank levels for one. Lift the fish out at once if it rolls or loses balance, and ask an aquatic vet if you are unsure.

Sources

  1. Extension — University of Florida IFAS Extension. Fact sheets on the use of salt (sodium chloride) in freshwater fish culture: treatment concentrations about 1–3 g/L for prolonged baths and 10–30 g/L for short dips. Used for the published concentration ranges behind the levels.
  2. Textbook — Noga, E. J., Fish Disease: Diagnosis and Treatment, Wiley-Blackwell. Salt as a treatment for external parasites and for nitrite (brown blood) disease, where chloride competes with nitrite uptake at the gills. Used for what salt is used for — not for the doses, which are the hobby's tablespoon levels.
  3. Definition — concentration by weight. 1% = 10 g of salt per litre of fresh water; one level US tablespoon (14.8 mL) of granular salt weighs about 17 g. Used for the % equivalents of the three levels.
  4. Hobby practice — the hobby's usual tablespoon-per-gallon levels. Tonic 1 tbsp per 5 gal, Mild 1 tbsp per 2.5 gal, Ich 1 tbsp per gal, with grams at 17–18 g per tablespoon. These are the levels this tool calculates; they are hobby convention, not a textbook prescription — and the Ich level's computed 0.46% sits above the 0.3% ceiling the guides cite, which is stated on the page, not hidden.

Related tools