Citric Acid CO2 Calculator

DIY CO₂ runs under pressure

Use pressure-rated bottles, tubing and fittings only, with a gauge and a safety valve — never seal a citric-acid system without one. Ordinary drinks bottles and fittings can fail. Fit a check valve so tank water cannot siphon back when pressure drops, and wear eye protection when mixing. For freshwater planted tanks.

Leave blank and give a target CO₂ amount instead

Works back to the citric acid needed — 100 g CO₂ needs about 146 g citric

Needed only for the days estimate — leave blank for the recipe alone

Hours the CO₂ runs each day, usually your light period

An assumption, not a measurement — real bubbles run roughly 0.05–0.16 mL. Change it and the days figure changes

Compare with a yeast/sugar bottle — 400 g sugar in a 2 L bottle makes about 103 g CO₂

Baking soda = citric acid × 1.312; CO₂ made = citric acid × 0.687; gas volume = CO₂ grams ÷ 1.84 g/L. Daily use = bubbles per second × bubble mL × 1.84 × hours × 3.6. Yeast: CO₂ ≈ sugar × 0.257 (half the 0.514 theoretical yield). Water: about 1 mL per gram of citric acid, about 2 mL per gram of baking soda as a slurry. Worked example: 200 g citric acid + 262 g baking soda makes 137 g CO₂ (75 L); at 2 bps, 9 h/day and 0.1 mL bubbles that is 11.9 g/day, so the batch lasts about 11.5 days.

Your CO₂ recipe

Enter grams of citric acid — or a target CO₂ amount to work back from. The recipe appears here, with the baking soda, the CO₂ made, and how many days the batch lasts.

Why use this calculator?

  • Get the exact baking-soda weight for your citric acid, instead of guessing a ratio that leaves acid or soda unused.
  • See how much CO₂ the batch actually makes, in grams and litres of gas, before you mix anything.
  • Find out how many days the batch lasts at your bubble rate and photoperiod — and why the bubble-size assumption matters.
  • Compare the citric recipe with a yeast bottle side by side, so the choice is on numbers, not habit.
  • Work back from a target CO₂ amount when you know how much gas you want, not how much acid you have.

Running a pressurised cylinder instead? The CO2 Cylinder Duration Calculator works out how long it lasts. Work out your starting bubble rate with the CO2 Bubble Rate Calculator. · Back to Planted Tank

Work out the baking-soda weight for your citric acid, how much CO2 the batch makes, and how many days it lasts at your bubble rate — with a yeast-bottle comparison on the side, so you mix the right ratio the first time instead of guessing. Everything runs in your browser; nothing is saved.

How it works

Citric acid and baking soda react to release CO2. The balanced reaction is C₆H₈O₇ + 3 NaHCO₃ → Na₃C₆H₅O₇ + 3 H₂O + 3 CO₂: one molecule of citric acid needs three of baking soda and makes three of CO2. The weights follow from the molar masses — citric acid 192.12, baking soda 84.007, CO2 44.01.

Baking soda. Baking soda (g) = citric acid (g) × 252.02 ÷ 192.12, or citric acid × 1.312. The 252.02 is three baking-soda molecules (3 × 84.007).

CO2 made. CO2 (g) = citric acid (g) × 132.03 ÷ 192.12, or citric acid × 0.687. The 132.03 is three CO2 molecules (3 × 44.01). Gas volume in litres = CO2 grams ÷ 1.84, because CO2 gas weighs 1.84 g per litre at 20 °C.

How long the batch lasts. Daily use (g/day) = bubbles per second × bubble size (mL) × 1.84 × hours per day × 3.6. The 3.6 converts seconds to hours and millilitres to litres (3,600 ÷ 1,000). Days = CO2 made ÷ daily use. You need a bubble rate and hours for the days figure — without them the recipe is shown but no days estimate.

Water. About 1 mL of water per gram of citric acid, and about 2 mL per gram of baking soda as a slurry.

Yeast comparison. A yeast bottle ferments sugar: sucrose → 4 CO2 gives 0.514 g of CO2 per gram of sugar at full yield (4 × 44.01 ÷ 342.30). Real bottles run at roughly half yield, so this tool uses 0.514 × 0.5 = 0.257 g of CO2 per gram of sugar, and says so.

The bubble-size assumption. No published standard fixes a bubble-counter bubble at 0.1 mL. Forum measurements put real bubbles anywhere from about 0.05 mL to about 0.16 mL, so bubble size is a user-entered input here, defaulting to 0.1 mL and labelled as an assumption. Change it and the days figure changes with it — the recipe (soda and CO2 made) does not depend on bubble size at all.

Worked example

200 g citric acid, 2 bubbles per second, 9 hours a day, 0.1 mL bubbles.

Inputs

Citric acid 200 g. Bubble rate 2 bps. CO2 hours 9 per day. Bubble size 0.1 mL.

Formula

Baking soda = citric × 1.312. CO2 = citric × 0.687. Litres = CO2 ÷ 1.84. Daily use = bps × bubble mL × 1.84 × hours × 3.6. Days = CO2 ÷ daily use.

Calculation

Baking soda = 200 × 1.312 = 262.4 g, so 262 g. CO2 = 200 × 0.687 = 137.4 g, so 137 g. Litres = 137.4 ÷ 1.84 = 74.7 L, so 75 L. Daily use = 2 × 0.1 × 1.84 × 9 × 3.6 = 11.9 g/day. Days = 137.4 ÷ 11.9 = 11.5 days. Water: 200 mL for the citric bottle, 525 mL for the soda bottle.

Result

262 g baking soda + 200 g citric acid makes 137 g of CO2 (75 L), lasting about 11.5 days at 2 bps, 9 hours a day.

Working back from a target works the same way. To make 100 g of CO2, start from 146 g of citric acid + 191 g of baking soda (100 ÷ 0.687 = 145.5 g citric; 145.5 × 1.312 = 190.9 g soda). And the yeast comparison: a 2 L bottle with 400 g of sugar makes about 103 g of CO2 (400 × 0.257 = 102.8 g), with about ½ teaspoon of yeast and ¼ teaspoon of baking soda.

How to read your results

The headline is the recipe: grams of citric acid in, grams of CO2 out. The stat grid shows the three numbers that decide the batch: baking soda in grams (citric × 1.312, with the water for both bottles), CO2 made in grams and litres, and how many days the batch lasts.

If the days stat shows a dash, you left the bubble rate or the hours blank — the recipe is still right, there is just no days estimate. Add both and the estimate appears.

Read the days figure as an estimate, not a promise. It moves with the bubble-size assumption: if your batch runs out much faster than the estimate, your bubbles are bigger than 0.1 mL. The recipe itself never moves — soda and CO2 made do not depend on bubble size.

If you entered sugar, the yeast row shows what the same bottle would make as a yeast system — about 103 g of CO2 from 400 g of sugar — so you can compare the two methods on numbers, not habit.

Common mistakes

  • Sealing a citric system without a safety valve. DIY CO2 runs under pressure — use pressure-rated bottles, tubing and fittings only, with a gauge and a safety valve.
  • Using an ordinary drinks bottle. They are not pressure-rated and can fail.
  • Skipping the check valve. When pressure drops, tank water can siphon back into the bottles.
  • Guessing the ratio instead of weighing it. A wrong ratio leaves acid or soda unused — and unused acid keeps reacting unpredictably.
  • Treating the days figure as exact. It depends on the bubble-size assumption (0.05–0.16 mL in practice), so it is an estimate either way.
  • Expecting a yeast bottle to run steady. Yeast output rises and falls over 2–3 weeks, unlike a citric system, and fades as the sugar runs out.
  • Filling a yeast bottle to the top. Fill it to about three-quarters full.
  • Using non-food-grade citric acid or baking soda, or mixing without eye protection. Add the citric solution slowly.

Batch sizes at 2 bps, 9 hours a day, 0.1 mL bubbles

Every row is the same recipe scaled up, at the worked-example rate.

Citric acidBaking sodaCO2 madeGas volumeWater (citric + soda)Batch lasts
50 g66 g34 g19 L50 mL + 131 mL2.9 days
100 g131 g69 g37 L100 mL + 262 mL5.8 days
200 g262 g137 g75 L200 mL + 525 mL11.5 days
300 g394 g206 g112 L300 mL + 787 mL17.3 days

Days scale with the batch: double the citric acid and the batch lasts about twice as long at the same bubble rate. Change the bubble rate, hours or bubble size and the days column changes — the recipe columns do not.

FAQ

Where does the 1.312 ratio come from?

From the balanced reaction and the molar masses. One citric-acid molecule (192.12) needs three baking-soda molecules (3 × 84.007 = 252.02), so the weight ratio is 252.02 ÷ 192.12 = 1.312. The CO2 ratio is the same idea: three CO2 molecules (3 × 44.01 = 132.03) over 192.12 gives 0.687.

Why does the days figure change when I change the bubble size?

Because daily use is bubbles per second × bubble size × hours. A 0.2 mL bubble carries twice the gas of a 0.1 mL bubble at the same bubble rate, so the batch lasts half as long — 5.8 days instead of 11.5 for the 200 g example. The recipe does not change: the same 200 g still makes 137 g of CO2.

Can I use any bottle for a citric CO2 system?

No. Use pressure-rated bottles, tubing and fittings only, with a gauge and a safety valve — never seal a citric-acid system without one. Ordinary drinks bottles and fittings can fail under pressure.

Citric or yeast — which lasts longer?

On the numbers, citric: 200 g of citric acid makes 137 g of CO2, while 400 g of sugar in a yeast bottle makes about 103 g. Citric also runs at a steadier rate until the batch ends; yeast output rises and falls over 2–3 weeks. Yeast needs no pressure-rated parts, which is its real advantage.

What if I only know how much CO2 I want?

Leave the citric acid blank and enter the target instead. To make 100 g of CO2 you need about 146 g of citric acid and 191 g of baking soda.

Does the water amount matter?

It is a recipe convention, not a stoichiometric rule: about 1 mL of water per gram of citric acid, and about 2 mL per gram of baking soda as a slurry. For the 200 g example that is 200 mL for the citric bottle and 525 mL for the soda bottle.

Does it have to be food-grade?

Yes — food-grade citric acid and baking soda only. Wear eye protection when mixing, add the citric solution slowly, and keep the bottles where a leak cannot drain into the tank.

Sources

The research notes for this tool record no URLs for these sources, so they are listed by name here rather than linked.

  1. Haynes (ed.), CRC Handbook of Chemistry and Physics — molar masses: citric acid 192.12, NaHCO₃ 84.007, CO₂ 44.01, sucrose 342.30; CO₂ gas density 1.84 g/L at 20 °C (Reference).
  2. Engineering Toolbox — CO₂ gas density 1.842 kg/m³ at 20 °C, confirming the 1.84 g/L used here (Reference).
  3. Balanced reactions: C₆H₈O₇ + 3 NaHCO₃ → Na₃C₆H₅O₇ + 3 H₂O + 3 CO₂; C₁₂H₂₂O₁₁ + H₂O → 4 C₂H₅OH + 4 CO₂, giving 0.514 g CO₂ per gram of sucrose at full yield (Chemistry).
  4. UKAPS forum measurements — real bubble-counter bubbles run roughly 0.05–0.16 mL, which is why bubble size is a user-entered assumption here (Hobby practice).

Related tools