Enter your pH, GH, KH, TDS and temperature and see which shrimp species your water suits — Neocaridina, Caridina Crystal, Taiwan Bee, Sulawesi, Amano or Ghost — with the exact parameter that is off when it does not. It also converts TDS to EC on both scales. Everything runs in your browser; nothing is saved.
How it works
The checker compares your five readings with the published keeper ranges for six shrimp groups, one parameter at a time. A species is in range only when every checked parameter sits inside its range; anything outside is named, with the direction and the range it missed.
The five readings. pH from a liquid test kit, GH and KH in degrees, TDS in ppm from a TDS meter, and temperature in °C of the tank water, not the room air. Test with a liquid kit and a TDS meter, not strips, for numbers worth using.
The conversions. EC (µS/cm) = TDS ÷ 0.5 on the NaCl scale, or TDS ÷ 0.70 on the 442 scale. Hardness: 1 dGH / dKH = 17.9 ppm CaCO3. Both are shown in the result, so one reading does the work of three.
What it does not check. Ammonia and nitrite: both must be 0 ppm in any shrimp tank, and this checker cannot confirm that — test them separately, and never add shrimp to an uncycled tank. It also does not judge stability: a perfect number that swings kills more shrimp than a slightly-off number that holds steady.
Two honest gaps. Taiwan Bee uses the Caridina Crystal ranges for pH, GH, KH and temperature — those are not separately verified Taiwan Bee ranges, and the checker says so wherever it shows them; only the TDS range (100–120 ppm) is Taiwan Bee-specific. And no published GH or KH range exists for Sulawesi in the source, so the checker does not judge Sulawesi GH or KH at all instead of inventing numbers.
Worked example
pH 7.0, GH 7 dGH, KH 2 dKH, TDS 200 ppm, 22 °C.
pH 7.0, GH 7, KH 2, TDS 200 ppm, temperature 22 °C.
Each reading against each species' range. EC = TDS ÷ 0.5 (NaCl) or ÷ 0.70 (442). Hardness in ppm = degrees × 17.9.
EC = 200 ÷ 0.5 = 400 µS/cm (NaCl); 200 ÷ 0.70 = 286 µS/cm (442). GH = 7 × 17.9 = 125.3 ppm; KH = 2 × 17.9 = 35.8 ppm. Neocaridina (pH 6.5–7.5, GH 6–8, KH 1–4, TDS 150–250, 18–26 °C): every reading inside. Amano: every reading inside. Caridina Crystal: pH 7.0 above 5.8–6.8, GH 7 above 4–6, KH 2 above 0–1, TDS 200 above 100–130 — out. Sulawesi: pH 7.0 below 7.5–8.5, TDS 200 above 120–140, 22 °C below 26–30 °C — out. Ghost: KH 2 below 3–10 — out.
2 of 6 species in range — Neocaridina and Amano. Caridina Crystal, Taiwan Bee, Sulawesi and Ghost do not fit this water.
Neocaridina and Caridina cannot share a tank — their water needs do not overlap. If one species is in range and the other is out, that is the answer, not a compromise to split.
How to read your results
The verdict word is how many of the six groups fit — "2 of 6 species in range", for example — and the stat grid shows the three conversions: TDS to EC, GH in ppm, KH in ppm. Under it, the groups are listed in two sets: "OK" (in range) and "Caution" (out of range), each with the exact parameter that is off and by how much.
Read an out-of-range row as a direction, not a verdict on the shrimp: "pH 7.0 is above the 5.8–6.8 range" tells you which way to move, and how far. A species that is out on one parameter by a little is a different decision from one out on four parameters by a lot.
The three notes at the bottom always apply: Neocaridina and Caridina cannot share a tank; ammonia and nitrite must both be 0 ppm and are not covered here; and stability matters more than a perfect number — move any value slowly, a few points of TDS or 0.2 pH per day, and drip-acclimate new shrimp.
Common mistakes
- Buying shrimp before testing. Check the water first — a species that needs different water will not adapt to yours.
- Splitting the difference between Neocaridina and Caridina water. Their ranges do not overlap; a compromise suits neither.
- Chasing a perfect number. Stability matters more — a steady GH of 7 beats a GH that bounces between 6 and 8.
- Moving a value fast. Shift TDS a few points a day, pH by 0.2 a day at most; sudden changes kill shrimp that a slow change would not.
- Adding shrimp to an uncycled tank. Ammonia and nitrite must both be 0 ppm, and this checker cannot confirm that — test them separately.
- Using strips for a decision that matters. Liquid kits and a TDS meter give numbers worth acting on; strips are a rough screen.
- Forgetting copper. Copper is lethal to dwarf shrimp at a fraction of a part per million — check medications and tap water for it, and if shrimp are dying or failing to moult, test ammonia and nitrite, check for copper, and ask a vet or an experienced keeper with the full test results in hand.
Shrimp water ranges
The published keeper ranges this checker runs on, from The Shrimp Guide. These are cautious targets, not hard survival limits — wider "acceptable" ranges appear in other keeper guides, and locally bred shrimp often adapt slightly outside them.
| Species | pH | GH | KH | TDS | Temp |
|---|---|---|---|---|---|
| Neocaridina (cherry shrimp) | 6.5–7.5 | 6–8 | 1–4 | 150–250 | 18–26 °C |
| Caridina Crystal | 5.8–6.8 | 4–6 | 0–1 | 100–130 | 20–23 °C |
| Taiwan Bee | 5.8–6.8 * | 4–6 * | 0–1 * | 100–120 | 20–23 °C * |
| Sulawesi | 7.5–8.5 | — | — | 120–140 | 26–30 °C |
| Amano | 6.5–7.5 | 6–8 | 2–6 | 150–250 | 20–27 °C |
| Ghost | 6.5–8.0 | 6–12 | 3–10 | 150–300 | 18–28 °C |
* Taiwan Bee pH, GH, KH and temperature follow the Caridina Crystal ranges — those are not separately verified Taiwan Bee ranges. Only the TDS range (100–120 ppm) is Taiwan Bee-specific. — means no published range in the source: Sulawesi GH and KH are not judged. GH and KH are in dGH/dKH; TDS in ppm.
FAQ
Which shrimp suit my water?
Enter your five readings and the checker says, for each of six groups, whether your water fits — and names the exact parameter that is off when it does not. In the worked example (pH 7.0, GH 7, KH 2, TDS 200, 22 °C), Neocaridina and Amano fit and the other four do not.
Can I keep Neocaridina and Caridina together?
No. Their water needs do not overlap — Neocaridina wants pH 6.5–7.5 and KH 1–4, Caridina wants pH 5.8–6.8 and KH 0–1. If one is in range and the other is out, that is the answer, not a compromise to split.
Why is Taiwan Bee judged on Caridina Crystal ranges?
Because no separately verified Taiwan Bee ranges for pH, GH, KH and temperature were found in the source — only the TDS range (100–120 ppm) is Taiwan Bee-specific. The checker says so wherever it shows those ranges, rather than presenting borrowed numbers as verified ones.
Why is Sulawesi GH/KH not judged?
Because no GH or KH range for Sulawesi is published in the source. The checker marks them "no published range in this checker" instead of inventing numbers — a blank is honest, a guess is not.
My water is slightly outside a range — will the shrimp die?
Not necessarily. These are cautious targets, not hard survival limits: wider "acceptable" ranges appear in other keeper guides, and locally bred shrimp often adapt slightly outside them. Stability matters more than a perfect number — move any value slowly and drip-acclimate new shrimp.
What does TDS to EC mean, and which scale do I use?
EC is the same mineral load measured as conductivity instead of dissolved solids. The NaCl scale divides TDS by 0.5; the 442 scale divides by 0.70. Use whichever scale your meter or your remineralizer's instructions use — the checker shows both, so you never need a second calculator.
Does this checker cover ammonia and nitrite?
No. Both must be 0 ppm in any shrimp tank, and this tool cannot confirm that. Test them separately with the Water Parameter Checker, and never add shrimp to an uncycled tank. If shrimp are dying or failing to moult, test ammonia and nitrite, check for copper, and ask a vet or an experienced keeper with the full test results in hand.
Sources
- Hobby practice — The Shrimp Guide, "Shrimp Water Parameters Chart by Species". The published keeper ranges this checker runs on for all six groups. theshrimpguide.com/posts/complete-shrimp-water-parameters-chart/
- Hobby practice — The Shrimp Farm, shrimp parameter guides. Used only for the wider "acceptable" ranges (for example Amano pH 6.5–8.0, GH 5–15, KH 1–10, TDS 80–450) — the reason the checker's ranges are described as cautious targets, not hard survival limits.
- Our dataset — TheCycledTank shrimp parameter data, as coded in the checker. The ranges above, the Taiwan Bee shared-ranges note, and the Sulawesi no-GH/KH gap are the site's own compiled dataset built from source 1; where the source does not publish a range, the dataset leaves it blank rather than guessing.