Carpet Plant Calculator

Area to carpet = length × width × coverage; portions = ⌈area ÷ spacing²⌉; cups = ⌈portions ÷ portions per cup⌉. Background stems use the same method on the strip. Many small portions fill faster than a few big ones — split each cup into small clumps and plant deep enough to hold. Portions per cup varies by plant and brand — split one cup and count before ordering the rest. Carpets need light reaching the floor, and most grow far faster with CO₂. For freshwater planted tanks.

How many cups do you need?

Enter your tank footprint, carpet coverage and spacing — the portion count, cup count and carpet area appear here.

Why use this calculator?

  • Order the right number of cups the first time, instead of running short halfway across the floor or over-ordering.
  • See the portion count as well as the cups, so you know how finely to split each one.
  • Compare spacings and watch the count change — halving the spacing quadruples the plants, and the cost shows it.
  • Add a background stem row to the same order, with its own stem and pot count.
  • Plan a dry start with the same numbers, since the carpet area and spacing do not change before flooding.

Feeding the carpet's roots? The Root Tab Calculator works out the tabs. Giving it CO₂? The CO2 Bubble Rate Calculator finds a starting bubble rate. · Back to Planted Tank

Work out how many portions and cups of carpet plants your tank floor needs at your planting spacing — plus a background stem row if you want one — so you order the right number of cups the first time. Everything runs in your browser; nothing is saved.

How it works

The calculator works out the carpeted area first, then how many plant portions cover it, then how many cups those portions come in. Area to carpet A = length × width × coverage. Portions n = ⌈A ÷ spacing²⌉ — each portion covers one spacing × spacing square. Cups = ⌈n ÷ portions per cup⌉.

Why the square matters. Spacing is a grid, not a line: halving the spacing quarters the area each portion covers, so it quadruples the plant count. At 1.5 in spacing a portion covers 2.25 in²; at 1 in it covers 1 in², and at 2 in it covers 4 in².

Background strip. A background stem row uses the same method on a strip instead of a floor: stems = ⌈strip length × depth ÷ spacing²⌉, and pots = ⌈stems ÷ stems per pot⌉.

Portions per cup. This varies by plant and brand — Monte Carlo is about 8 per cup, dwarf hairgrass similar, Glossostigma fewer. Split one cup and count before ordering the rest, and enter your own number here.

Worked example

Half of a 40 gal breeder: a 36 × 18 in floor, 50% carpeted, 1.5 in spacing, 8 portions per cup.

Inputs

Length 36 in, width 18 in, coverage 50%, spacing 1.5 in, 8 portions per cup.

Formula

Area = length × width × coverage. Portions = ⌈area ÷ spacing²⌉. Cups = ⌈portions ÷ portions per cup⌉.

Calculation

Area = 36 × 18 × 0.5 = 324 in². Spacing² = 1.5 × 1.5 = 2.25, so 324 ÷ 2.25 = 144 portions. 144 ÷ 8 = 18 cups.

Result

18 cups, 144 portions at 1.5 in spacing.

Two more checks. Fully carpeted 24 × 12 in floor at 1 in spacing, 6 portions per cup → 288 portions, 48 cups. Background row: a 48 × 4 in strip at 1.5 in spacing → ⌈48 × 4 ÷ 2.25⌉ = 86 stems, and ⌈86 ÷ 7⌉ = 13 pots of 7 stems each.

How to read your results

The verdict word is the cup count — what to order. Under it, the portion line names the portion count and the carpeted area. The stat grid shows the three numbers that decide the order: area to carpet, portions needed, and cups needed. If you added a background strip, its stems and pots appear as a fourth stat.

Portions and cups answer different questions. Cups is the order; portions is how finely to split each cup once it arrives. Split each cup into small clumps and plant deep enough to hold — many small portions fill in faster than a few big ones.

To compare spacings, change the spacing and watch the count: 1 in spacing fills fastest but needs more than twice the plants of 1.5 in; 2 in is cheapest but slowest to close. 1.5 in is the usual cost/fill-in balance.

What to do next: order the cup count, split one cup and count the portions to check your per-cup number, then plant in small clumps at your spacing.

Common mistakes

  • Ordering by cups without checking portions per cup for your plant and brand — Monte Carlo is about 8, but Glossostigma gives fewer.
  • Planting a few big clumps instead of many small ones. Small portions fill in faster.
  • Planting too shallow, so the clumps float up. Plant deep enough to hold.
  • Spacing too wide (2 in) and expecting a fast carpet — or too tight (1 in) and paying for four times the plants.
  • Skipping light and CO₂. Carpets need light reaching the floor, and most grow far faster and denser with CO₂ and good light.
  • Flooding immediately and fighting algae from day one. A dry start — a damp, covered tank for a few weeks before flooding — lets the carpet root without algae competition.
  • Expecting Glossostigma or HC Cuba to carpet without CO₂. They usually struggle; Monte Carlo and some hairgrass can carpet slowly without it.

Cups at 1.5 in spacing, 8 portions per cup

How many cups a floor needs at the usual spacing and per-cup count. At any other spacing, the portion count scales with 1 ÷ spacing².

Floor50%Full
30 × 12 in1020
36 × 18 in (40 gal breeder)1836
48 × 13 in (55 gal)1835
48 × 18 in (75 gal)2448

Read across a row to see what full coverage costs over a half carpet: on a 36 × 18 in floor, 18 cups at 50% becomes 36 cups fully carpeted.

FAQ

What spacing should I use?

1.5 in is the usual cost/fill-in balance. 1 in fills fastest but needs more than twice the plants; 2 in is cheapest but slowest to close.

How many portions are in a cup?

It varies by plant and brand. Monte Carlo is about 8 per cup, dwarf hairgrass similar, Glossostigma fewer. Split one cup and count before ordering the rest.

Do I need CO₂ for a carpet?

Most carpets grow far faster and denser with CO₂ and good light. Monte Carlo and some hairgrass can carpet slowly without it, while Glossostigma and HC Cuba usually struggle.

What is a dry start?

A damp, covered tank for a few weeks before flooding. The carpet roots without algae competition, and the area and spacing are the same as after flooding.

Why plant small clumps?

Many small portions fill in faster than a few big ones, and small clumps root in more places across the floor.

Does the carpet need strong light?

It needs light reaching the floor. Check the Planted Tank Light Planner for the PAR target at your depth before buying a light.

Can I add a background row to the same order?

Yes — enter the strip length and depth, and the calculator works out its stems and pots with the same method, at the same spacing.

Sources

No URLs are on file for these sources; they are listed by name.

  1. Kasselmann, C., Aquarium Plants, Krieger Publishing, 2003 — growth habits of Micranthemum, Eleocharis, Glossostigma and other foreground plants (Textbook).
  2. TheCycledTank method — portions = ⌈planted area ÷ spacing²⌉; cups = ⌈portions ÷ portions per cup⌉; stems for a strip use the same method (Our method).

Related tools