Ich Heat-Treatment Timeline Planner

Timeline maths only — not a diagnosis or a treatment recommendation

Freshwater only: marine ich is a different parasite, so this planner does not apply to saltwater tanks. Heat-alone treatment is debated in the hobby — heat speeds the parasite life cycle; whether heat alone clears ich is disputed. This planner assumes a confirmed diagnosis and that you and an aquatic veterinarian / aquatic specialist have already chosen heat treatment. It does not diagnose ich, recommend treatment, or name any drug. Warmer water holds less oxygen — increase surface agitation / aeration while raising the temperature. Consult an aquatic veterinarian before changing tank temperature.

Temperature unit
Your tank’s temperature now, in the unit selected above
82–86 °F (28–30 °C) — the treatment-temperature range quoted in the guides
Goldfish, white cloud minnows and hillstream loaches are heat-intolerant — for them this tool refuses to produce a timeline
Hold after the last visible spot
If given, the planner shows the date the target is reached and the date the hold ends

Timeline = (target − current) ÷ 1 °F per day, rounded up to whole days, then the hold of 10 or 14 days counted from the last visible spot. Life-cycle context from the same guides: 7–10 days at 25 °C, 3–4 days at 30 °C.

Your timeline

Enter your current and target temperatures — the days to raise the temperature and the hold after the last visible spot appear here.

Why use this calculator?

  • See the full schedule before you start — how many days the rise takes, day by day, and when the hold ends.
  • Use the conservative 1 °F per day pace, with the published 1–2 °C per hour upper limit shown beside it and labelled as a limit, not a pace to follow.
  • Count the hold from the last visible spot — 10 days minimum or 14 days standard, as quoted in the guides.
  • Get a hard stop, not a timeline, for heat-intolerant fish — goldfish, white cloud minnows and hillstream loaches.
  • Keep the oxygen warning in view: warmer water holds less oxygen, so aeration matters while the temperature rises.

Check your heater can hold the target temperature steadily with the Heater & Filter Sizer. If you are unsure whether your fish have ich at all, this planner cannot help — it assumes a confirmed diagnosis and a choice already made with an aquatic veterinarian. · Back to Stocking & Fish Care

Work out the timeline for a heat treatment you and an aquatic veterinarian have already chosen for a confirmed ich diagnosis in a freshwater tank: how many days the temperature rise takes at a conservative 1 °F per day, then how many days to hold at the treatment temperature. This planner is timeline maths only — it does not diagnose ich, recommend treatment, or name any drug, and it refuses to plan a temperature rise for heat-intolerant fish. Everything runs in your browser; nothing is saved.

How it works

The planner computes only a timeline — days to raise the temperature at a conservative pace, then days held at the treatment temperature. It assumes a confirmed diagnosis and a heat treatment already chosen with an aquatic veterinarian.

The formula. Ramp days = (target − current) ÷ 1 °F per day, rounded up to whole days. Total days = ramp days + hold days. The target range is 82–86 °F (28–30 °C), as quoted in the guides behind this tool.

The hold counts from the last visible spot. 14 days is the standard hold quoted in the guides; 10 days is the minimum quoted hold after the last visible spot. The hold does not start until the temperature has reached the target — and a new spot restarts the count.

Why the hold is counted in days at the target. The guides quote the parasite life cycle at 7–10 days at 25 °C (77 °F) and 3–4 days at 30 °C (86 °F). Warmer water speeds the cycle, which is why the hold is held at the treatment temperature. That is background context, not a promise that the hold clears anything.

Ramp-rate conflict, flagged not resolved. The guides quoted for this tool also state a published upper limit of a rise of no more than 1–2 °C per hour, while the schedule this tool produces uses a conservative pace of 1 °F per day. Those are different framings — a maximum rate versus a conservative daily pace — and the sources do not reconcile them. This tool uses only the conservative 1 °F per day schedule; the 1–2 °C per hour figure is shown alongside it labelled as the published upper limit, never as a schedule to follow. Do not treat the upper limit as a target pace.

Hard stop for heat-intolerant fish. Goldfish, white cloud minnows and hillstream loaches must not be put through a temperature rise to 82–86 °F (28–30 °C) — for them this tool refuses to produce a timeline and refers you to a vet instead.

Oxygen. Warmer water holds less oxygen, so increase surface agitation / aeration while raising the temperature, and watch the fish for laboured breathing or gasping at the surface.

Worked example

A tank at 75 °F, target 86 °F, 14-day hold, starting 2026-11-10.

Inputs

Current: 75 °F. Target: 86 °F (30 °C). Hold: 14 days (standard quoted). Fish: heat-tolerant tropical. Start: 2026-11-10.

Formula

Ramp days = (target − current) ÷ 1 °F per day, rounded up. Total = ramp + hold.

Calculation

Rise = 86 − 75 = 11 °F. Ramp = 11 ÷ 1 = 11 days. Total = 11 + 14 = 25 days. Target reached 2026-11-10 + 11 days = 2026-11-21. Hold ends + 25 days = 2026-12-05.

Result

25 days total: 11 days up (Day 1: 76 °F … Day 11: 86 °F), then 14 days held at 86 °F.

Two variants of the same rise. With the 10-day minimum hold instead of 14, the total is 11 + 10 = 21 days. In Celsius, 24 °C to 30 °C is a 10.8 °F rise, which rounds up to the same 11 ramp days — 25 days total with the 14-day hold.

How to read your results

The big number is the total days: ramp plus hold. Under it, the stat grid shows the ramp in days, the hold in days, and the target temperature — with the dates the target is reached and the hold ends, when you entered a start date.

The schedule table lists the temperature day by day, then the hold row. Below it, the rows are grouped. "Caution" rows are the ones to read twice: the ramp-rate conflict, the oxygen warning, and — if you selected "not sure" — the heat-tolerance warning. "OK" rows are the context: the rise itself, the hold, the life-cycle figures, the fallow fact, and the freshwater-only limit.

What to do next depends on the card. A timeline means: raise 1 °F a day, hold from the last visible spot, increase aeration, and watch the fish. A "No timeline" card for heat-intolerant fish means: do not raise the temperature — consult an aquatic veterinarian about options for your tank instead.

Common mistakes

  • Treating the 1–2 °C per hour upper limit as a pace to follow. It is a published maximum rate, not a schedule — this tool uses the conservative 1 °F per day instead, and the sources do not reconcile the two.
  • Counting the hold from the first day, or from when the spots first fade. The hold counts from the last visible spot — a new spot restarts it.
  • Using heat on goldfish, white cloud minnows or hillstream loaches. They are heat-intolerant; this tool refuses to plan a rise for them.
  • Using this planner for a saltwater tank. Marine ich is a different parasite, so this timeline does not apply.
  • Forgetting aeration. Warmer water holds less oxygen — increase surface agitation while the temperature rises.
  • Assuming heat alone is proven to clear ich. Heat-alone treatment is debated in the hobby: heat speeds the parasite life cycle, and whether heat alone clears ich is disputed.
  • Stopping the hold early when the spots vanish. The hold is the point — spots gone does not mean the cycle is done.

Day-by-day schedule — worked example

The 75 °F to 86 °F rise from the worked example, one degree a day. The tool produces this table for any rise you enter.

DayTemperature (°F)Temperature (°C)
Day 176 °F24.4 °C
Day 277 °F25.0 °C
Day 378 °F25.6 °C
Day 479 °F26.1 °C
Day 580 °F26.7 °C
Day 681 °F27.2 °C
Day 782 °F27.8 °C
Day 883 °F28.3 °C
Day 984 °F28.9 °C
Day 1085 °F29.4 °C
Day 1186 °F30.0 °C
Day 12 onwards86 °F — hold 14 days30.0 °C

Life-cycle and hold figures quoted in the same guides: the parasite life cycle is 7–10 days at 25 °C (77 °F) and 3–4 days at 30 °C (86 °F); the hold after the last visible spot is 10 days minimum, 14 days standard; and a fishless fallow of 3 weeks at 30 °C (86 °F) is quoted as a fact — not a plan this tool produces.

FAQ

Does this planner diagnose ich?

No. It assumes a confirmed diagnosis and a heat treatment already chosen with an aquatic veterinarian. If you are unsure whether your fish have ich at all, this planner cannot help.

Does heat alone cure ich?

That is debated in the hobby. Heat speeds the parasite life cycle; whether heat alone clears ich is disputed. This planner times a rise and a hold — it does not promise a cure.

Why 1 °F per day when the guides say 1–2 °C per hour?

Those are different framings that the sources do not reconcile: 1–2 °C per hour is a published upper limit (a maximum rate), while 1 °F per day is the conservative pace this tool schedules. The tool uses only the conservative pace and shows the upper limit labelled as a limit, never as a target.

When does the hold start?

From the last visible spot — not from day one, and not from when the spots first fade. A new spot restarts the count, and the hold does not start until the temperature has reached the target.

Why no timeline for my goldfish?

Goldfish, white cloud minnows and hillstream loaches are heat-intolerant and must not be put through a rise to 82–86 °F (28–30 °C). Consult an aquatic veterinarian about options for your tank instead.

Can I use it for a saltwater tank?

No. Marine ich is a different parasite, so this timeline does not apply to saltwater tanks.

Why do I need more aeration?

Warmer water holds less oxygen. Increase surface agitation / aeration while raising the temperature, and watch for laboured breathing or gasping at the surface.

What is the 3-week fallow the page mentions?

A fact from the same guides: 3 weeks at 30 °C (86 °F) with no fish in the tank. This tool does not plan a fallow period — it only times a temperature rise and hold for a stocked tank.

Sources

  1. App-Aquatic ich guide (Hobby practice) — treatment-temperature range 28–30 °C / 82–86 °F, life-cycle figures, hold and fallow figures quoted in this planner.
  2. LivingProf (Hobby practice) — ich life cycle and heat-treatment context quoted in this planner.
  3. The Fish Collection (Hobby practice) — ich treatment context quoted in this planner.

The guides behind this planner were recorded by name in the tool's research notes; no URLs were recorded on file, so none are printed here — the figures are quoted as the guides state them, and the ramp-rate conflict is flagged rather than resolved.

Related tools