Scale the dose printed on your liquid carbon bottle to your exact tank volume — daily dose, after-water-change dose and spot-treatment maximum — so you dose from the label, not from a bottle cap. Everything runs in your browser; nothing is saved.
How it works
This tool does one thing: it scales the numbers printed on your bottle to your tank. It does not invent a dose — every figure here is the label dose, scaled by volume. Doses differ by brand, so read the numbers off your own bottle.
Daily dose. Daily mL = label mL ÷ label gallons × tank gallons × multiplier. The multiplier is 1 for a normal dose and 2 for an algae dose.
After a water change. After-water-change mL = initial mL ÷ initial gallons × tank gallons. This dose REPLACES that day's daily dose — it is not added on top of it.
Algae dose and spot maximum. Both are 2 × the daily dose at multiplier 1. Spot treatment means squirting the dose directly onto the algae with a syringe, with the filter off for 15 minutes — and it counts as that day's dose.
Sensitive plants or livestock. Some plants melt at normal doses — vallisneria, some mosses, Egeria/anacharis, Riccia, and some Cryptocoryne. With the sensitive box ticked, the multiplier is capped at 1 (no algae dose) and the tool suggests starting at half the daily dose. Never double-dose with sensitive plants, shrimp or snails.
What liquid carbon is not. Liquid carbon is glutaraldehyde-based. It supplies some carbon and suppresses algae, but far less than injected CO2, and it does not replace a CO2 system in a high-light tank. It is not an algae cure.
Worked example
A 40 US gallon low-tech tank, label 5 mL per 50 gallons daily and 5 mL per 10 gallons after a water change, normal dose.
Tank 40 US gal. Label daily: 5 mL per 50 gal. Label after water change: 5 mL per 10 gal. Normal dose (1×).
Daily = label mL ÷ label gal × tank gal. After change = initial mL ÷ initial gal × tank gal. Algae / spot max = 2 × daily.
Daily = 5 ÷ 50 × 40 = 0.1 × 40 = 4.0 mL/day. After a water change = 5 ÷ 10 × 40 = 20.0 mL. Algae dose = 2 × 4.0 = 8.0 mL. Spot maximum = 2 × 4.0 = 8.0 mL.
4.0 mL per day, 20.0 mL after a water change (instead of the daily dose, not as well as it), and 8.0 mL for an algae dose or spot treatment.
With sensitive plants and the algae option on, the same tank is capped at 4.0 mL — the algae doubling is not applied — and the suggested start is half the daily dose, 2.0 mL.
How to read your results
The headline is your daily dose in millilitres. The stat grid shows the three numbers you actually use: the daily dose, the after-water-change dose, and the spot-treatment maximum.
The after-water-change dose is the big one — 20.0 mL for the 40-gallon example against a 4.0 mL daily dose — because the label's after-change rate (5 mL per 10 gal) is five times its daily rate (5 mL per 50 gal). It replaces that day's daily dose. Dosing both would double-dose the tank.
The spot maximum is a ceiling, not a target: squirt up to that much directly onto the algae with the filter off for 15 minutes, and count it as that day's dose. If sensitive plants or livestock are present, the result is capped at the label rate and the verdict says so — start at the half dose shown and watch new growth for a week before stepping up.
Common mistakes
- Adding the after-water-change dose on top of the daily dose. It replaces it.
- Measuring with the bottle cap. Bottle caps are rough measures — use a syringe.
- Double-dosing with sensitive plants, shrimp or snails. The 2× algae dose is never for them.
- Treating liquid carbon as CO2. It helps low-tech tanks but does not replace a CO2 system in a high-light tank.
- Spot-treating with the filter running. Turn it off for 15 minutes so the dose stays on the algae instead of dispersing through the tank.
- Expecting it to cure algae on its own. It suppresses algae; the cause — too much light, unstable CO2, excess nutrients — still needs fixing.
- Forgetting oxygen. Higher doses plus dying algae use oxygen, so add surface movement during algae treatment.
Doses by tank size (typical label: 5 mL per 50 gal daily, 5 mL per 10 gal after a water change)
Normal dose. With a different label, the same scaling applies — read your own bottle.
| Tank volume | Daily dose | After a water change | Algae dose (2×) / spot maximum |
|---|---|---|---|
| 10 gal | 1.0 mL | 5.0 mL | 2.0 mL |
| 20 gal | 2.0 mL | 10.0 mL | 4.0 mL |
| 40 gal | 4.0 mL | 20.0 mL | 8.0 mL |
| 75 gal | 7.5 mL | 37.5 mL | 15.0 mL |
| 125 gal | 12.5 mL | 62.5 mL | 25.0 mL |
Doses scale linearly with volume: a 75-gallon tank takes 7.5 mL a day because 5 ÷ 50 × 75 = 7.5. In litres, the same tank is about 284 L and the dose is the same 7.5 mL — the tool converts litres to gallons first (÷ 3.78541).
FAQ
Is liquid carbon the same as CO2?
No. Liquid carbon is glutaraldehyde-based: it supplies some carbon and suppresses algae, but far less than injected CO2. It helps low-tech tanks and does not replace a CO2 system in a high-light tank.
Why is the after-water-change dose so much bigger than the daily dose?
Because the label rates differ. A typical label says 5 mL per 50 gallons daily but 5 mL per 10 gallons after a water change — five times the rate. The after-change dose tops the tank back up after the change, and it replaces that day's daily dose.
Can I double-dose for algae if I have shrimp or snails?
No. Never double-dose with sensitive plants, shrimp or snails. Tick the sensitive box: the dose is capped at the label rate and the tool suggests starting at half the daily dose.
Which plants count as sensitive?
Vallisneria, some mosses, Egeria/anacharis, Riccia, and some Cryptocoryne can melt at normal doses. If you are not sure about a plant, treat it as sensitive and start at half dose.
How do I spot-treat?
Turn the filter off for 15 minutes so the water is still, draw the dose into a syringe, and squirt it directly onto the algae — up to the spot maximum, which is 2× the daily dose. It counts as that day's dose, so do not add a daily dose on top.
My bottle's label is different from the example — does the tool still work?
Yes. The tool scales whatever your label says: enter your bottle's mL and gallons figures and it does the same arithmetic. Doses differ by brand, which is why the label is the authority, not the example.
Does liquid carbon replace CO2 in a high-light tank?
No. In a high-light tank the plants need far more carbon than liquid carbon supplies. If growth stalls or algae takes over at high light, the answer is injected CO2, not a bigger liquid-carbon dose.
Sources
The research notes for this tool record no URLs for these sources, so they are listed by name here rather than linked.
- Barr, T., Barr Report / planted tank forums — glutaraldehyde-based liquid carbon, its use as an algaecide, and its effect on sensitive plants (Hobby practice).
- Label scaling — the method this tool runs on: daily mL = label mL ÷ label gallons × tank gallons × multiplier; spot maximum = 2 × daily dose (Method).