Reef Nitrate Dosing Calculator

Volume units

Water in the tank, after rock and sand

What does your test kit read?

KNO₃ also adds potassium; NaNO₃ does not

e.g. 10 g potassium nitrate in RO water to 100 mL

Worked example: a 100-gallon reef (378.5 L) at 0 ppm nitrate needs 3.09 g of potassium nitrate to reach 5 ppm, spread over 3 days at 2 ppm/day — adding 3.15 ppm of potassium. As a stock of 10 g in 100 mL that is 30.9 mL in total, about 10.3 mL per day. Formulae from molar masses in the CRC Handbook of Chemistry and Physics: NO₃ g = rise × litres ÷ 1000; KNO₃ g = NO₃ g ÷ 0.6133; NaNO₃ g = NO₃ g ÷ 0.7295.

Your nitrate dose

Enter your volume, current and target nitrate — the weighed dose appears here, split over enough days to stay inside your daily rise.

Why use this calculator?

  • Turns a test reading into a weighed dose — no guessing how many grams a 5 ppm rise takes.
  • Splits the correction over enough days to stay inside your chosen daily rise, instead of one big jump.
  • Shows the potassium that comes with potassium nitrate, so you can switch to sodium nitrate if potassium is already high.
  • Converts a stock solution into millilitres per day, so tiny tanks can dose accurately too.
  • Handles nitrate-nitrogen kits, so a NO₃-N reading is converted before the maths starts.

Check the rest of the water with the Water Parameter Checker, work out phosphate with the Reef Phosphate Dosing Calculator, and your tank size with the Tank Volume Calculator. · Back to Saltwater & Reef

Work out how much potassium nitrate or sodium nitrate raises nitrate by the amount your test says is missing — in grams, as a stock-solution dose, and split over enough days to stay inside your chosen daily rise. Worked example: a 100-gallon reef at 0 ppm nitrate needs 3.09 g of potassium nitrate to reach 5 ppm, spread over 3 days. Everything runs in your browser; nothing is saved.

How it works

Corals need some nitrate — a reef sitting at a true zero often starves, with pale corals and stalled growth. When your test reads below the level you want, this tool works out the weighed salt that closes the gap, from the level you measured. It never suggests a target level: the target is yours.

Nitrate needed (g) = rise (ppm) × litres ÷ 1000. Because 1 ppm is 1 mg per litre, the grams of nitrate itself are the rise times the litres, divided by 1,000.

KNO₃ (g) = nitrate g ÷ 0.6133; NaNO₃ (g) = nitrate g ÷ 0.7295. A salt is not pure nitrate: potassium nitrate is 61.33% nitrate by weight and sodium nitrate is 72.95%, from their molar masses (KNO₃ 101.10, NaNO₃ 84.99, NO₃⁻ 62.00). Dividing by the fraction gives the grams of salt to weigh.

Potassium added (ppm) = KNO₃ g × 0.3867 × 1000 ÷ litres. Potassium nitrate is 38.67% potassium by weight, so the same dose that raises nitrate also raises potassium — the tool shows by how much, so you can switch to sodium nitrate if potassium is already high.

Days = rise ÷ max rise per day, rounded up. The default cap is 2 ppm per day: a 5 ppm rise takes 3 days, at about a third of the dose each day. A sudden nitrate jump feeds algae before corals can use it.

Stock solution (mL) = salt g ÷ (stock g ÷ stock mL). Dissolving the salt in RO water first makes small doses measurable: 10 g in 100 mL is 0.1 g per mL, so a 3.09 g dose is 30.9 mL of that stock.

Nitrate-nitrogen kits. Some kits report nitrate-nitrogen (NO₃-N) instead of nitrate as NO₃. The tool multiplies those readings by 4.43 first (62.00 ÷ 14.01, the NO₃ to N mass ratio) so the maths always works in ppm as NO₃.

Worked example

A 100-gallon reef (378.5 L) testing 0 ppm nitrate, target 5 ppm, potassium nitrate, max rise 2 ppm per day, stock of 10 g in 100 mL.

Inputs

378.5 L, 0 → 5 ppm nitrate, KNO₃, 2 ppm/day, stock 10 g in 100 mL.

Formula

NO₃ g = rise × litres ÷ 1000. KNO₃ g = NO₃ g ÷ 0.6133. Days = rise ÷ 2, rounded up. Stock mL = salt g ÷ 0.1 g/mL.

Calculation

NO₃ g = 5 × 378.54 ÷ 1000 = 1.893 g. KNO₃ = 1.893 ÷ 0.6133 = 3.09 g. Potassium = 3.09 × 0.3867 × 1000 ÷ 378.54 = 3.15 ppm. Days = 5 ÷ 2 = 2.5 → 3 days, so 3.09 ÷ 3 = 1.03 g per day.

Result

3.09 g of potassium nitrate, 1.03 g per day over 3 days, adding 3.15 ppm of potassium. As stock: 3.09 ÷ 0.1 = 30.9 mL in total, about 10.3 mL per day.

The same rise with sodium nitrate needs 1.89 ÷ 0.7295 = 2.59 g and adds no potassium at all — the right choice when potassium already reads high (around 420 ppm or more).

How to read your results

The verdict word is the dose in grams — the headline number to weigh. Under it, the pair line names the salt and the daily split, and the stat grid shows the salt dose, the grams per day, and the potassium the dose adds.

If the verdict says "No dose needed", nitrate is already at or above your target — do not dose to push it higher. A "Caution" row means the correction is split over several days on purpose, or that raising nitrate alone can push phosphate to zero: keep both nutrients detectable. An "OK" row is a check that passed, such as the whole correction fitting inside one safe daily rise.

Test again between doses. After the first correction, test daily: if nitrate drops back to zero, a small daily dose holds it where you want it.

Common mistakes

  • Dosing the whole correction at once. A sudden nitrate jump feeds algae before corals can use it — split it at 2 ppm per day or less.
  • Reading a NO₃-N kit as ppm NO₃. A 1 ppm NO₃-N reading is 4.43 ppm as NO₃ — dosing from the unconverted number under-doses by more than four times.
  • Raising nitrate while phosphate sits at zero. Corals need both nutrients detectable; nitrate alone can push phosphate to zero and stall the tank.
  • Using garden fertiliser or stump remover as a nitrate source. They can contain other compounds — use lab or food-grade nitrate salt.
  • Tipping dry salt straight onto corals. Dissolve it in a little RO water first, then add it to the tank.
  • Ignoring the potassium that comes with KNO₃. A 5 ppm nitrate rise in a 100-gallon tank adds 3.15 ppm of potassium — if potassium is already high, use sodium nitrate instead.

Nitrate salt per 1 ppm rise

Grams of salt to raise nitrate by 1 ppm, by system size. All figures recomputed with the formulae above.

Tank sizeKNO₃NaNO₃
25 gal0.154 g0.130 g
50 gal0.309 g0.259 g
75 gal0.463 g0.389 g
100 gal0.617 g0.519 g
150 gal0.926 g0.778 g
200 gal1.234 g1.038 g

Read it as a scaling check, not as a dose: multiply the row for your tank size by the rise you need, then split it over days at your daily cap.

FAQ

Why dose nitrate at all? Isn't nitrate a pollutant?

In a reef tank nitrate is a nutrient, not just a pollutant. Corals and the bacteria that feed them need some of it, and a tank at a true zero often shows pale corals and stalled growth. The tool doses from a level you measured to a target you chose — it never says what that target should be.

Potassium nitrate or sodium nitrate — which should I use?

Both deliver the same nitrate. Potassium nitrate also adds potassium (3.15 ppm per 5 ppm nitrate rise in a 100-gallon tank), which is fine unless potassium already reads high — around 420 ppm or more — in which case sodium nitrate adds the same nitrate with no potassium.

Why split the dose over days?

A sudden nitrate jump feeds algae before corals can use it. The default cap is 2 ppm per day, so a 5 ppm rise takes 3 days. Test again between doses, and after the first correction test daily.

My kit reads NO₃-N, not NO₃. Does that matter?

Yes — a 1 ppm NO₃-N reading is 4.43 ppm as NO₃. Pick the nitrate-nitrogen option in the form and the tool converts it before the maths starts; dosing from the unconverted number under-doses by more than four times.

Why make a stock solution instead of weighing the dry salt each time?

Small tanks need fractions of a gram that kitchen scales cannot weigh reliably. Dissolving 10 g in RO water to 100 mL gives 0.1 g per mL, so a 1.03 g daily dose is 10.3 mL of stock — easy to measure with a syringe. Label the bottle with its strength and the date you mixed it.

Can I use garden fertiliser or stump remover?

No. Garden products and stump removers can contain other compounds besides nitrate. Use lab or food-grade nitrate salt, dissolve it in a little RO water first, and never tip dry salt straight onto corals.

Sources

  1. Textbook — Haynes (ed.), CRC Handbook of Chemistry and Physics. Molar masses used for the salt fractions: KNO₃ 101.10, NaNO₃ 84.99, NO₃⁻ 62.00, K 39.10. Used for the 0.6133, 0.7295 and 0.3867 figures and the 4.43 NO₃-N conversion.
  2. Hobby practice — Holmes-Farley, R., Reefkeeping Magazine / Advanced Aquarist. Nitrate and phosphate in reef aquaria, and why ultra-low nutrients harm corals. Used for the cautions about keeping both nutrients detectable and testing daily after a correction.

No web link is given for these sources because none is on file — the figures come from the printed references named above.

Related tools