Saltwater & Reef

For a saltwater or reef tank, the numbers that matter most are the ones that drift every day — salinity, alkalinity, calcium and magnesium, and the nutrients your corals and fish live with. This hub gathers every saltwater and reef calculator on the site in one place, so you can check a reading, work out a dose, or plan a change without hunting through the full list.

Whether you are mixing your first batch of saltwater, keeping a mixed reef steady, or planning how much rock and livestock a new marine tank can hold, start with the calculator that matches the job in front of you — each one runs in your browser and works from the readings and labels you already have.

Find your calculator

Salinity & salt

  • Salinity Converter — Convert a salinity reading between specific gravity, ppt, PSU and percent, so a number from any test kit or label reads the same way.
  • Saltwater Mix — Work out how much salt mix to add to reach the salinity you are aiming for, from the water you already have.
  • Hydrometer Correction — Correct a hydrometer reading for the water temperature, so a warm-tank reading shows the true specific gravity and salinity.
  • Lower Salinity — Plan a careful step-down to a lower salinity, with each day's water swap and the hold and return schedule worked out for you.

Major elements

  • Reef Alkalinity — Work out the weighed dose of baking soda or soda ash that raises alkalinity by the amount you need, split across days.
  • Reef Calcium — Work out the weighed dose of calcium chloride that closes the gap to your calcium target, without landing it all in one dose.
  • Reef Magnesium — Work out the weighed chloride and Epsom doses that close a magnesium gap while keeping the salt balance near seawater.
  • Reef Dosing — Turn a test reading and the potency on your product's label into a dose in millilitres, split over enough days to stay inside the safe daily rise.
  • Reef Consumption — Turn two test readings taken days apart into a standing daily dose that matches what your corals actually use.
  • Kalkwasser — Check whether limewater alone can meet your reef's daily alkalinity demand, and see the shortfall to cover with two-part dosing.
  • Calcium Reactor — Work out what your calcium reactor supplies each day, or work backwards from your corals' demand to the effluent rate.

Nutrients, traces & checks

  • Reef Nitrate Dosing — Work out the nitrate salt dose that raises nitrate to your target, as grams or a stock-solution dose, split over days.
  • Reef Phosphate Dosing — Work out the phosphate salt dose that raises phosphate to your target, as milligrams or a stock-solution dose, split over days.
  • Carbon Dosing — Work out the daily carbon dose for vodka, vinegar or ethanol, compared on the carbon each adds, with a day-by-day ramp-up.
  • Reef Trace Elements — Work out how much DIY salt or commercial supplement closes a measured shortfall in potassium, iodine or strontium.
  • GFO Dosing — Work out how much GFO your system needs, with a start dose and a maintenance dose, and a half dose when phosphate is high.
  • Reef Parameter Checker — Enter your reef test results and see each one judged against the ranges for your tank type, plus whether calcium and alkalinity are balanced.

Livestock & setup

  • Live Rock — Work out how much rock to buy for your tank volume, rock type and aquascape style, with the range across styles and the cost.
  • Coral Dip — Turn the dose on your dip product's label into the exact millilitres and drops for the volume of dip water you mixed.
  • Saltwater Stocking — Check a marine stocking plan against published care numbers — tank size, temperament, reef safety and shared water conditions.
  • Dosing Pump — Turn a daily dose into a dosing-pump program — millilitres and seconds per dose and the dose times across the day — with a calibration check.

See the other hubs: Tank Size & Setup · Water Chemistry · Planted Tank · Stocking & Fish Care · See all 88 tools.