Enter your tank volume, the temperature now and the temperature you want, and how fast you want to get there — get the chiller size in BTU/hr, including the heat your lights and pumps add. Everything runs in your browser; nothing is saved.
How it works
Pull-down. The heat to remove is pull-down BTU = gallons × lb/gal × ΔT (°F), where lb/gal is 8.34 for freshwater and 8.5 for saltwater. Divide by the hours to reach the target and you get the pull-down rate in BTU/hr. A ΔT in °C × 1.8 is the same ΔT in °F, so temperatures entered in °C work the same way — only the difference is used.
Equipment heat. Every watt of lights and pumps becomes heat the chiller must also remove: equipment BTU/hr = watts × 3.41, because 1 W = 3.41 BTU/hr. That heat runs all the time the equipment is on, so it is added before the margin.
Safety margin. Add 15% or 20% on top of the pull-down plus equipment heat. The margin and the 8.5 lb/gal saltwater figure are the values the formula sources use, not a manufacturer spec — check the chiller maker's own rating before buying.
What it does not do. HP class is deliberately not shown: 1 HP is roughly 9,000–12,000 BTU/hr depending on the chiller, so HP varies too much between models to be a sizing number — compare chillers by BTU/hr. The arithmetic also does not count heat leaking in through the glass, the room, or the lid, or the chiller losing capacity when the air around it is hot, so a chiller rated at exactly this number in a hot room cools more slowly than the hours entered.
Worked example
A 50 gal freshwater tank at 86°F, target 80°F, 4 hours to get there, 100 W of lights and pumps, 20% margin.
Volume 50 gal, freshwater. Current 86°F, target 80°F. Hours 4. Equipment 100 W. Margin 20%.
Pull-down BTU = gal × 8.34 × ΔT. BTU/hr = pull-down ÷ hours. Equipment = watts × 3.41. Then + margin.
ΔT = 6°F. Pull-down = 50 × 8.34 × 6 = 2,502 BTU. Over 4 hours: 625.5 BTU/hr. Equipment: 100 × 3.41 = 341 BTU/hr. Before margin: 966.5 BTU/hr. With margin: 966.5 × 1.20 = 1,159.8 BTU/hr.
1,159.8 BTU/hr — about 340 W of cooling. Buy a chiller rated at or above that, at your room temperature.
Want it faster? The same tank in 2 hours instead of 4 needs a pull-down rate of 1,251 BTU/hr before equipment and margin — roughly double. Hours are the lever that moves the answer most after the temperature drop itself.
How to read your results
The verdict word is the required chiller size in BTU/hr, with your safety margin built in. Under it, the pair line gives the same number in watts of cooling. The stat grid shows the three numbers that make it up: the required BTU/hr, the pull-down rate, and the equipment heat.
The Caution rows are the two things that make the real load bigger than the arithmetic: comparing by HP instead of BTU/hr, and heat leaking in through the glass, the room or the lid. The "How to fix it" list says the same thing in one line — give the chiller clear ventilation and check the maker's rated BTU/hr at your room temperature.
What to do next: shortlist chillers rated at or above the BTU/hr shown, check the rating at your room temperature (not the coolest temperature on the box), and leave the margin alone — it is a minimum, not a cushion to spend.
Common mistakes
- Buying by HP. One horsepower is roughly 9,000–12,000 BTU/hr depending on the model — HP alone does not say whether a chiller meets your BTU/hr.
- Forgetting the equipment heat. Lights and pumps add 3.41 BTU/hr per watt, all the time they are on.
- Putting the chiller in a hot, closed cabinet. Hot air around the chiller cuts its capacity, so the same chiller cools more slowly than the hours you entered.
- Using the tank's rated size instead of its actual water volume. Rock, substrate and equipment displace water — the pull-down is for the water that is actually there.
- Expecting exact hours in a warm room. The arithmetic does not count heat leaking in through the glass, the room or the lid.
- Entering °C temperatures with °F selected (or the other way round). Pick the unit first — switching it converts the values you already typed.
- Spending the safety margin. The 15–20% is a minimum for the unknowns above, not headroom to trade away.
Equipment heat in BTU/hr
Every watt of lights and pumps adds 3.41 BTU/hr the chiller must also remove. Common totals:
| Equipment watts | Heat added |
|---|---|
| 50 W | 170.5 BTU/hr |
| 100 W | 341 BTU/hr |
| 150 W | 511.5 BTU/hr |
| 200 W | 682 BTU/hr |
Add up all the lights and pumps that run while the chiller runs — anything unlisted is uncounted, and the real load is higher than the number shown.
FAQ
What is a BTU/hr?
A BTU is the heat needed to raise 1 lb of water by 1°F. BTU/hr is how fast a chiller removes that heat — the number to compare chillers by.
Why does the chiller need to know the hours?
The same temperature drop takes the same total heat out, but faster means a bigger rate: halving the hours roughly doubles the BTU/hr the chiller must deliver.
Why is there no HP size shown?
1 HP is roughly 9,000–12,000 BTU/hr depending on the model, so HP varies too much between chillers to be a sizing number. Compare by the maker's rated BTU/hr.
Does it matter if I enter °C instead of °F?
No — only the difference is used, and a difference in °C × 1.8 is the same difference in °F. Switching the unit converts the temperatures you already typed.
Why is saltwater 8.5 lb/gal and freshwater 8.34?
Salt water is denser, so a gallon of it weighs more and takes more heat out to cool. Those are the figures the formula sources use.
My room is hot — does the number still hold?
Not exactly. Hot air around the chiller cuts its capacity, and heat leaks in through the glass, the room and the lid. Give the chiller ventilation, check its rated BTU/hr at your room temperature, and treat the margin as a minimum.
Sources
- OnceHesap — aquarium chiller sizing (BTU = gal × 8.34 × ΔT°F ÷ hours) — oncehesap.com (Hobby practice).
- Aquifarm — aquarium chiller sizing calculator (ambient + equipment + pull-down + flow) — aquifarm.com (Hobby practice).
- HydroExperts — how to choose the right water chiller size (equipment watts × 3.41 BTU/hr) — hydroexperts.com.au (Hobby practice).