Evaporation & Top-Off Planner

Mark the normal water level, do not top off, then measure the drop with a tape measure
7 days is the usual measurement period — longer gives a steadier average
For context only — shows the daily loss as a share of the tank
How many gallons your auto top-off reservoir holds
Water type

Gallons lost = length (in) × width (in) × drop (in) ÷ 231. This is your tank’s measured loss — there is no universal evaporation rate, so nothing here is guessed from tank size. The rate varies with lid, airflow, temperature and humidity, so re-measure when the season changes.

How much water do you lose?

Enter the footprint, the measured drop and the days — the daily and weekly loss appears here, with how long your ATO reservoir lasts.

Why use this calculator?

  • Size an ATO reservoir to your tank’s real loss, instead of guessing how many days it will last.
  • Know exactly how much fresh water to top off each day, so salinity stays steady in a saltwater tank.
  • Spot a jump in evaporation early — a bigger drop than usual can mean a lid left off, a fan change, or a leak worth checking.
  • Plan top-offs around holidays and trips, with a number measured from your own tank.

Mix the salt water for a water change with the Saltwater Mix Calculator, or check the water itself with the Water Parameter Checker. · Back to Tank Size & Setup

Measure how much water your tank really loses to evaporation, then plan top-offs and an ATO reservoir around that number. Mark the water level, wait a few days without topping off, and enter the drop — size an ATO reservoir to your tank's real loss instead of guessing. Everything runs in your browser; nothing is saved.

How it works

There is no universal evaporation rate, so this planner does not guess one from your tank size. It works from a drop you measure on your own tank: mark the normal water level, do not top off, and measure how far the level falls over a few days.

The formula. Gallons lost = length (in) × width (in) × drop (in) ÷ 231, because 1 US gallon is 231 cubic inches. That is the volume of the missing slab of water — the footprint times the depth lost. Daily loss is the total divided by the days measured; weekly loss is the daily loss × 7.

ATO reservoir. If you enter your auto top-off reservoir size, the planner divides it by the daily loss: reservoir gallons ÷ gallons per day = days of cover. That is how long the tank can top itself off before the reservoir runs dry.

Share of the tank. If you enter the tank volume, the planner also shows the daily loss as a percentage of the volume — context only. A small percentage does not mean the loss is small in gallons, and it is the gallons that decide the top-off.

Saltwater: only water evaporates. The salts stay behind. Top off with fresh RO/DI water only — never salt water, and never tap water. Skipping top-offs lets salinity rise as the tank concentrates; topping off with salt water raises it faster. Freshwater has the same one-way street in miniature: dissolved solids concentrate as the level falls, which is one more reason to keep up with water changes.

Worked example

A 55-gallon tank, 48 in long and 18 in wide, with a 0.5 in drop measured over 7 days, and a 5-gallon ATO reservoir.

Inputs

Length 48 in, width 18 in, drop 0.5 in, 7 days. Tank volume 55 gal, ATO reservoir 5 gal.

Formula

Gallons lost = length × width × drop ÷ 231. Per day = total ÷ days. ATO days = reservoir ÷ per day. Share = per day ÷ volume × 100.

Calculation

Total: 48 × 18 × 0.5 ÷ 231 = 432 ÷ 231 = 1.87 gal over the week. Per day: 1.87 ÷ 7 = 0.27 gal/day. Per week: 0.27 × 7 = 1.87 gal/week. ATO: 5 ÷ 0.27 = 18.7 days. Share: 0.27 ÷ 55 × 100 = 0.49%/day.

Result

0.27 gal/day — top off about a quarter of a gallon of fresh water each day, and the 5-gallon reservoir lasts about 18.7 days.

What skipping top-offs does to salinity, on the same numbers: a 55-gallon saltwater tank at 35 ppt loses 1.87 gal in a week without a top-off, leaving 53.13 gal holding the same salt. Salinity becomes 35 × 55 ÷ 53.13 = 36.2 ppt — up 1.2 ppt in one week. That is why the top-off water must be fresh, and why a week without one is already worth correcting slowly, not in one big change.

How to read your results

The big number is the daily loss in gallons — the amount of fresh water to top off each day. Under it, the weekly loss and the length of the measurement. The stat grid repeats the daily loss, the weekly loss, and the ATO reservoir cover in days.

If you entered a reservoir size, the ATO row says how many days it lasts at this rate. Refill it before then, or size up if it does not cover your time away — a reservoir that lasts 3 days is no help on a 7-day holiday. If you did not enter one, the stat says "Not entered" — the daily loss still stands on its own.

The rows under the stats are grouped. "Needs action" is the saltwater warning: top off with fresh RO/DI only. "Caution" is a reservoir that runs dry in under a week. "OK" is the context — the share of tank volume, and the reminder that this rate belongs to your tank and the week you measured it.

Common mistakes

  • Topping off a saltwater tank with salt water. Only water evaporates; the salts stay behind. Salt-water top-offs raise salinity every time, and skipping top-offs does the same more slowly.
  • Guessing the drop instead of measuring it. A guessed drop gives a guessed answer — mark the level, wait, and measure with a tape measure.
  • Measuring over one day. A single day's drop is noisy — a warm afternoon or a fan left on skews it. Seven days is the usual period; longer gives a steadier average.
  • Measuring with the lid off, then running with it on (or the reverse). The rate belongs to the setup you measured — a lid, fan, heater setting or season change moves it, so re-measure after any of those changes.
  • Confusing top-off with a water change. A top-off replaces evaporated water with fresh water; a water change removes tank water and replaces it with mixed salt water (or dechlorinated fresh water). They are different jobs.
  • Ignoring a jump in evaporation. A bigger drop than usual can mean a lid left off, a fan change — or a leak worth checking.
  • Letting the ATO reservoir run dry on holiday. Size the reservoir to the trip, not to the week: days of cover must be longer than the days away.

Reference: what other tanks lose

These are examples from one keeper's tanks, reported by Salt Tank Report — not your tank's rate. They show the scale of it, and why a measured number beats a guessed one.

TankReported lossNotes
50-gallon saltwater~0.5 gal/dayAbout 1% of volume per day.
120-gallon open-top reef1–1.5 gal/dayOpen top and reef lighting raise the loss; a lid cuts it.
55-gallon (worked example)0.27 gal/dayMeasured: 48 × 18 in footprint, 0.5 in drop over 7 days.

The same source gives the method in centimetres: drop (cm) × length (cm) × width (cm) = millilitres lost. That is the same formula in metric — 1 millilitre is 1 cubic centimetre — and the inch form (÷ 231) is its direct unit conversion, not a different formula.

FAQ

How much water evaporates from a fish tank each day?

There is no universal number — it depends on the footprint, lid, airflow, temperature and humidity. As examples of what other tanks see, Salt Tank Report reports about 0.5 gal/day on a 50-gallon saltwater tank and 1–1.5 gal/day on a 120-gallon open-top reef. Measure your own tank: the worked example above, a 55-gallon tank, lost 0.27 gal/day.

How do I measure evaporation?

Mark the normal water level, do not top off, and measure the drop with a tape measure after 7 days. Enter the length, width, drop and days, and the planner gives the gallons per day. Longer than 7 days gives a steadier average.

Should I top off with salt water or fresh water?

Fresh RO/DI water only, for a saltwater tank. Only water evaporates; the salts stay behind. Topping off with salt water raises salinity, and so does skipping top-offs. For freshwater, top off with fresh water — dechlorinate tap water first.

What happens if I skip top-offs for a week?

Salinity rises as the tank concentrates. On the worked example — a 55-gallon tank at 35 ppt losing 1.87 gal in a week — salinity reaches 36.2 ppt. Correct it slowly with fresh water over days, not in one big change.

How big should my ATO reservoir be?

Big enough to cover your longest time away, at your measured daily loss: reservoir gallons ÷ gallons per day = days of cover. A 5-gallon reservoir at 0.27 gal/day lasts about 18.7 days; at 1 gal/day it lasts 5 days.

Does a lid reduce evaporation?

Yes — a tight lid is the single biggest lever on the rate, which is why a measured rate belongs to the setup you measured. Re-measure after adding or removing a lid, changing a fan, or when the season changes.

Is evaporation the same as a leak?

No, but a sudden jump in the drop is worth checking. If the measured loss rises sharply with no lid, fan or season change, look for water outside the tank before assuming evaporation.

Sources

  1. Salt Tank Report — Reef tank evaporation rate: the 7-day measured-drop method, the inch formula (footprint × drop ÷ 231) and the centimetre form, and the example rates (~0.5 gal/day on a 50-gallon saltwater tank; 1–1.5 gal/day on a 120-gallon open-top reef) (Hobby practice). salttankreport.com/reef-tank-evaporation-rate/
  2. US gallon definition — 1 US gallon = 231 cubic inches (Standard).
  3. TheCycledTank evaporation method — the measured-input rule: the drop is measured on this tank, never presented as a universal rate (Our method).

Related tools