Tank Size & Setup

This hub gathers the calculators that answer the practical questions around a tank before it is bought, built or filled: how big it is, how much it weighs, what equipment it needs and what it costs to run. Work through them in order — size the tank, check the floor and the glass, size the equipment, then price the running costs — and every figure comes from measurements you enter yourself, so measure the tank rather than trusting the label. Everything runs in your browser; nothing is saved.

Find your calculator

Tank size & volume

  • Volume Calculator — Works out a tank's volume in gallons and litres from its measurements, for rectangular, bow-front, cylinder, hexagon and octagon shapes.
  • Actual Water Volume — Deducts glass, the rim gap, substrate and rock to show how much water the tank actually holds — the figure dosing should be based on.
  • Gallon Converter — Converts between US gallons, UK gallons, litres and cubic feet, so a label in any unit matches the tank.
  • Tank Dimensions — Looks up standard tank sizes by footprint and real gross volume, or works out the missing dimension for a custom build.
  • Pond Volume — Works out a pond's volume from its shape and measurements, plus the liner size and the pump flow it needs.

Weight, floor & glass

  • Tank Weight — Totals the filled weight of a tank — water, glass, substrate and hardscape — in pounds and kilograms.
  • Floor Load — Shows the weight per square foot a filled tank puts on the floor, with design live-load figures alongside for context.
  • Glass Thickness — Finds the minimum glass thickness for a given water depth and bracing, from published tables.
  • Substrate Calculator — Works out how much substrate a footprint and target depth need, in weight and in bags to buy.

Equipment

  • Sump Size — Sizes a sump from the water that drains back when the return pump stops, plus normal running volume and a safety margin.
  • Heater & Filter Sizer — Sizes a heater in watts and a filter in gallons per hour from tank size, target temperature and bioload.
  • Chiller — Sizes a chiller in BTU per hour from volume, temperature drop and pull-down time, including heat from lights and pumps.
  • Return Pump — Works out the flow a sump return pump must deliver at the system's real head, so it can be matched to a pump curve.
  • Protein Skimmer — Gives a rated-capacity range to shop in for a reef skimmer, from system volume and bioload.
  • Bio-Media — Plans how much bio-media a filter needs, showing a label-dose model and a feed-based model side by side.

Running costs & planning

  • Setup Cost Estimator — Builds a rough budget for a new setup, broken down by item, from tank size and setup style.
  • Electricity Cost — Adds up the monthly and yearly running cost of each device from its watts, hours and the electricity rate.
  • Evaporation & Top-Off — Turns a measured water-level drop into daily top-off volume and an ATO reservoir size.
  • Power-Outage Backup — Works out the watt-hours a power station must hold to keep essential equipment running, and how long a battery lasts.

See the other hubs: Water Chemistry · Saltwater & Reef · Planted Tank · Stocking & Fish Care · See all 88 tools.