Nitrogen Cycle Tracker

A full fishless cycle typically takes 4–8 weeks. Entries are stored only in this browser (localStorage) — nothing is sent anywhere. If storage is blocked, the log still works for this session. A record of your tests is also the most useful thing to share when asking for help.

Where is my cycle?

Why use this calculator?

  • See the cycle progress instead of guessing — ammonia phase, nitrite phase, almost done, cycled.
  • Know exactly when the tank is ready — the 2 ppm → 0/0 in 24 hours confirmation test, not a feeling.
  • A record to show when asking for help — dates and numbers beat "my water is fine".

Dose the ammonia with the Ammonia Dosing Calculator, check whether a single reading is dangerous with the Free Ammonia Calculator, and check the rest of the water with the Water Parameter Checker. · Back to Water Chemistry

Log each test — ammonia, nitrite, nitrate — and watch the cycle move from ammonia phase to nitrite phase to cycled, with the 2 ppm confirmation test. Entries stay in your browser only; nothing is sent anywhere.

How it works

A fishless cycle grows two groups of bacteria: one that eats ammonia and turns it into nitrite, and one that eats nitrite and turns it into nitrate. The tracker reads your latest logged test and says which stage the tank is in — it never guesses from a single reading, and it never calls a tank cycled without the confirmation test.

Not started. No entries yet, or ammonia and nitrite have never read above 0 — nothing has been dosed or seen yet. Dose 2 ppm ammonia to start (the Ammonia Dosing Calculator works out the dose), then log a test every day or two.

Ammonia phase. Latest ammonia above 0, nitrite still 0: ammonia is being produced but the nitrite bacteria are not going yet. Keep dosing ammonia to about 2 ppm when it falls and keep logging.

Nitrite phase. Latest nitrite above 0: ammonia is being converted, and nitrite is waiting on its own bacteria. Nitrite is toxic too, so this is the longest-feeling stretch — keep logging and do not add fish yet.

Almost done. Latest ammonia 0 and nitrite 0, but the confirmation test has not been run yet. One clean reading is not proof.

Cycled. Latest ammonia 0 and nitrite 0 AND the confirmation test passed: dose 2 ppm ammonia, and 24 hours later both read 0 again. That 2 ppm → 0/0 in 24 hours test is the site's own fishless-cycle baseline.

How long it takes. A full fishless cycle typically takes 4–8 weeks, test-confirmed. There is no safe shortcut, and bottled bacteria do not skip the wait.

Worked example

A 19-day fishless cycle, three logged tests.

Inputs

2026-11-01: ammonia 2, nitrite 0, nitrate 0. 2026-11-12: ammonia 0, nitrite 2, nitrate 20. 2026-11-20: ammonia 0, nitrite 0, nitrate 40.

Formula

Stage from the latest entry: nitrite above 0 means nitrite phase; ammonia above 0 with nitrite 0 means ammonia phase; latest 0/0 means almost done — cycled only with the confirmation test ticked.

Calculation

Nov 1: ammonia 2, nitrite 0 — ammonia phase. Nov 12: nitrite 2 — nitrite phase. Nov 20: ammonia 0, nitrite 0 — almost done. 3 entries over 19 days; highest ammonia 2 ppm, highest nitrite 2 ppm; nitrate climbed 0 → 20 → 40 as the bacteria worked.

Result

"Almost done — run the confirmation test" on Nov 20. Tick the confirmation box — dosed 2 ppm, 24 hours later both read 0 — and the verdict becomes "Cycled". Stock slowly, a few fish at a time.

The same log without the confirmation test stays "Almost done" — the tracker never calls a tank cycled on a clean reading alone. And a log that never shows ammonia or nitrite above 0 stays "Not started" even with the box ticked: nothing was ever dosed, so there is nothing to confirm.

How to read your results

The verdict word is the stage, and the stat grid shows the log so far: how many entries, over how many days, and the highest ammonia and nitrite seen. Below it, the log table lists every test, newest first.

Not started means dose 2 ppm and start logging. Ammonia phase means keep dosing to about 2 ppm when it falls. Nitrite phase means keep logging and do not add fish yet — this stretch feels the longest. Almost done means run the confirmation test before adding fish. Cycled means stock slowly, a few fish at a time.

If ammonia comes back up after a clean reading, the tracker goes back to ammonia phase — the cycle has stalled or something died in the tank. Find the cause before dosing again.

Common mistakes

  • Adding fish on one clean reading. Only the confirmation test counts: dose 2 ppm, and 24 hours later ammonia and nitrite both read 0.
  • Logging ammonia only. A missing nitrite reading is the one that hides where the cycle actually is — log all three readings every time.
  • Stopping the log too early. Nitrate climbing week over week is the proof the bacteria are working; without the log you are guessing.
  • Dosing fish food instead of ammonia and wondering why nothing happens. The cycle needs a measured ammonia dose — the Ammonia Dosing Calculator works it out.
  • Replacing all the filter media mid-cycle. That throws away the bacteria you have grown — rinse media in tank water, never replace it all at once.
  • Expecting it to take a week. A full cycle usually takes 4–8 weeks; a tracker that says "nitrite phase" on day 10 is normal, not broken.

The five stages at a glance

What each stage means and what to do next.

StageLatest readingsWhat it meansNext step
Not startedNothing above 0 yetNothing dosed or seenDose 2 ppm ammonia, log every day or two
Ammonia phaseAmmonia > 0, nitrite 0Ammonia bacteria startingKeep dosing to ~2 ppm when it falls
Nitrite phaseNitrite > 0Ammonia converting; nitrite bacteria catching upKeep logging; do not add fish
Almost doneAmmonia 0, nitrite 0Looks cycled, unprovenRun the 2 ppm confirmation test
Cycled0/0 after the confirmation dose2 ppm cleared to 0/0 in 24 hoursStock slowly, a few fish at a time

FAQ

How long does a fishless cycle take?

Usually 4–8 weeks, test-confirmed. The tracker shows where you are in that stretch — ammonia phase, then nitrite phase, then almost done — so a "nitrite phase" reading on day 10 is normal, not a problem.

How do I know the tank is really cycled?

Run the confirmation test: dose 2 ppm ammonia, and 24 hours later ammonia and nitrite must both read 0. Tick the confirmation box in the tracker only when that test has actually passed. One clean reading without dosing is not proof.

Why does the tracker need nitrite, not just ammonia?

Because ammonia alone cannot tell you the stage. Ammonia falling to 0 could mean the cycle is done — or that nitrite is piling up behind it. A missing nitrite reading is the one that hides where the cycle actually is.

Where are my entries stored?

Only in this browser, in localStorage — nothing is sent anywhere. If storage is blocked, the log still works for this session. A record of your tests is also the most useful thing to share when asking for help — dates and numbers beat "my water is fine".

Ammonia came back after a clean reading — what happened?

The cycle has stalled, or something died in the tank. The tracker goes back to ammonia phase. Find the cause — a hidden casualty, overfeeding, replaced filter media — before dosing again.

Can I use this tracker for a fish-in cycle?

The stages still describe what is happening, but the advice does not fit: with fish in the tank you cannot dose ammonia, and any ammonia or nitrite reading is an emergency water change, not a stage to wait out. This tracker is built for a fishless cycle.

Sources

  1. Our recommendation — TheCycledTank species database (data/species-db.json, care_baselines). Dose 2–4 ppm ammonia; complete when ammonia and nitrite both read 0 within 24 hours of a 2 ppm dose; a full fishless cycle takes 4–8 weeks, test-confirmed.
  2. Our guide — TheCycledTank fishless cycle guide. The full method this tracker logs, linked from the Ammonia Dosing Calculator.

This tool's stages and baselines are the site's own tested practice — no external standard or textbook source was used for them. The 2 ppm → 0/0 in 24 hours confirmation test is the site's own fishless-cycle baseline, and the 4–8 week span is test-confirmed on the site's own cycles.

Related tools