Work out exactly how much dechlorinator your water change needs — in mL, drops and cap threads — from the Seachem Prime label dose or your own product's bottle. Dose exactly what the water needs instead of guessing from capfuls. Everything runs in your browser; nothing is saved.
How it works
The dose is the label rate times the water, times any adjustment:
Dose (mL) = gallons × mL per gallon × tier × 2 (high chloramine) × ½ (above 30 °C, chlorine/ammonia low).
The only brand dose given here is Seachem Prime's label dose: 5 mL per 50 US gallons of new water, i.e. 0.1 mL per US gallon — about 2 drops per gallon. One cap thread is approximately 1 mL, 1 mL is about 20 drops, and 5 mL is one capful. Every other product has its own label dose, so a custom product's mL per gallon must come from its own bottle, never from memory — and if the number on your bottle disagrees with this calculator, follow the bottle.
Dose the new water only. A 25% change on a 40-gallon tank is 10 gallons of tap water, so the dose is for 10 gallons, not 40. The exception is dosing the tank directly: the Prime label says to base the dose on aquarium volume when adding it straight to the aquarium, and it is better to add it to the new water first, before it goes in the tank.
The adjustments come from the Prime label too. Above 1× is for an ammonia/nitrite emergency only — the label allows up to 5× to detoxify nitrite in an emergency, and never above 1× for a routine water change. A double dose is for exceptionally high chloramine. A half dose is for water above 30 °C (86 °F) when chlorine or ammonia levels are low. The label does not describe combining the double dose and the half dose, so when both boxes are ticked this calculator multiplies the two factors — that is arithmetic, not a label instruction.
Worked example
A routine 50-gallon water change with Seachem Prime at the label dose, 1×, no boxes ticked.
50 US gal of new water · Prime 0.1 mL/gal · Tier 1× · No high chloramine · Not above 30 °C.
mL = 50 × 0.1 × 1. Drops = mL × 20. Cap threads = mL ÷ 1. Capfuls = mL ÷ 5.
50 × 0.1 = 5.0 mL. Drops = 5 × 20 = 100. Cap threads = 5. Capfuls = 5 ÷ 5 = 1.
5 mL — about 100 drops, 5 cap threads, 1 capful.
The adjustments, on the same 50 gallons. A 5× emergency tier gives 25 mL (500 drops). High chloramine doubles it to 10 mL. The half dose above 30 °C gives 2.5 mL. And a small change is small: 10 gallons at the routine dose is 1 mL = 20 drops, and 1 gallon is 0.1 mL = 2 drops.
How to read your results
The headline is the dose in mL, and the line under it names the water it covers and the rate used. The stat grid gives the same dose three ways: mL (with capfuls underneath), drops, and cap threads — use whichever your bottle measures in.
Below the stats, each row says what was applied and why. A tier above 1× is a caution: emergency use only, never for a routine change. A dose under 1 mL is a caution too — too small to measure with a cap, so use a syringe or pipette; counting drops at that size is guesswork. If both the double dose and the half dose are ticked, the result says so plainly, because the label does not describe combining them.
Common mistakes
- Dosing the whole tank for a partial change. Dose the new water only — a 25% change on a 40-gallon tank needs a 10-gallon dose.
- Guessing a custom product's rate. Only Prime's label dose is given here; every other product's mL per gallon comes from its own bottle.
- Using a whole capful for a bucket. One capful (5 mL) treats 50 gallons — a 5-gallon bucket needs 0.5 mL, about 10 drops.
- Using an emergency tier for a routine change. Above 1× is for an ammonia/nitrite emergency only.
- Letting tap water stand overnight to clear chloramine. Chloramine does not gas off at all — standing only works for plain chlorine, and even then it takes a day or more with aeration. A conditioner is quicker and more reliable for both.
- Skipping conditioner for the tap portion of an RO blend. The RO water itself needs none, but the tap water mixed into it does — dose for the tap portion only.
Prime doses for common water changes
Routine 1× dose at the Prime label rate of 0.1 mL per US gallon. Each row is the same formula as the worked example.
| New water | Dose | Drops | Cap threads | Capfuls |
|---|---|---|---|---|
| 5 gal | 0.5 mL | 10 drops | 0.5 | 0.1 |
| 10 gal | 1.0 mL | 20 drops | 1 | 0.2 |
| 20 gal | 2.0 mL | 40 drops | 2 | 0.4 |
| 30 gal | 3.0 mL | 60 drops | 3 | 0.6 |
| 50 gal | 5.0 mL | 100 drops | 5 | 1 |
| 100 gal | 10.0 mL | 200 drops | 10 | 2 |
FAQ
How much conditioner do I need for my water change?
The new water only, at your product's label rate. For Prime that is 0.1 mL per gallon — 5 mL for a 50-gallon change, 1 mL for 10 gallons. This calculator gives the same answer in mL, drops and cap threads.
Can I overdose dechlorinator?
A small overdose of a modern conditioner is harmless, and some labels allow up to 5× the dose in an ammonia emergency. Large overdoses can lower oxygen, because the active ingredient reacts with it. Never go beyond the maximum on the bottle.
Chlorine or chloramine — what's the difference?
Chlorine leaves standing water slowly (a day or more, with aeration), is typically 0.5–2 ppm, releases no ammonia, and any dechlorinator handles it. Chloramine does not leave standing water, is typically 1–4 ppm, releases ammonia when treated, and needs a conditioner that also binds ammonia. Your supplier's annual water quality report (US Consumer Confidence Report) names which disinfectant you have.
Do I need conditioner for RO water?
No for the RO water itself — the carbon prefilter removes chlorine before the membrane. But any tap water blended into it still needs conditioner, sized for the tap portion only.
Can I just let tap water stand overnight?
Only if your supply uses plain chlorine, and even then it takes a day or more with aeration. Chloramine does not gas off at all. A conditioner is quicker and more reliable for both.
What if my product isn't Prime?
Use the custom product option and enter its dose from its own bottle — mL per gallon, never guessed. Label doses differ by product and change by region and formulation, so no other brand's dose is listed here.
Sources
- Manufacturer — Seachem Prime dosing instructions (Seachem support). 1 capful (5 mL) per 200 L (50 US gallons) of new water; 1 cap thread ≈ 1 mL; double dose for exceptionally high chloramine; up to 5× to detoxify nitrite in an emergency; half dose above 30 °C with low chlorine/ammonia. The label dose this tool runs on. seachem.zendesk.com — Prime dosing instructions
- Government — US EPA, National Primary Drinking Water Regulations. Maximum residual disinfectant level 4.0 mg/L (as Cl₂) for both chlorine and chloramines. Used for the chlorine/chloramine levels behind the FAQ.
- Government — US EPA, Chloramines in Drinking Water. Why utilities use chloramine and how it differs from chlorine. Used for the chlorine-vs-chloramine guidance.