Look up a standard tank's dimensions and check it against your stand, or work out the missing dimension for a custom build. Standard mode covers 21 US sizes from 5 to 300 gallons, with footprint and gross volume. Custom mode solves for height, length or width from a target volume, rounded to the nearest 1/4 in (1/2 cm in Metric) — as close as most glass is cut. Everything runs in your browser; nothing is saved.
How it works
Standard sizes. Pick a size and the calculator shows its typical outside dimensions, its footprint and its gross volume. Footprint = length × width ÷ 144 (144 square inches in a square foot). Gross volume = length × width × height ÷ 231 (231 cubic inches in a US gallon). Enter your space length and depth and it checks the fit: a tank fits only if both dimensions are at least as big as the tank's.
Custom build. Give a target volume and the two dimensions you know, and the calculator solves for the missing one: height = gallons × 231 ÷ (length × width); length = gallons × 231 ÷ (width × height); width = gallons × 231 ÷ (length × height). In centimetres, litres × 1,000 ÷ (the other two dimensions in cm) gives the missing dimension in cm. The solved dimension is a water dimension — the water in the tank, not the glass. It is rounded to the nearest 1/4 in (1/2 cm in Metric), and the volume check recomputes the volume from the rounded size so you can see what the rounding cost.
From water to glass. To order glass, add the gap above the water to the height, and add twice the glass thickness to length and width for the outside size. The gap defaults to 1 in (2.5 cm) when left blank. Switching units converts every number you entered (36 in becomes 91.4 cm), so the physical build stays the same. Standard sizes are US sizes, so their dimensions are shown in inches in either unit mode.
The label is a size class. The gross volume a standard tank's dimensions actually give is often not its label — a "125-gallon" tank measures 117.8 gallons from its 72 × 18 × 21 in dimensions, while a "55-gallon" measures 56.7. The table below shows the real figure for every size.
Worked example
A custom 40-gallon tank on a 36 × 18 in stand, with 1 in of space above the water.
Custom build · Target 40 US gal · Solve for height · Length 36 in · Width 18 in · Gap 1 in.
Height = gallons × 231 ÷ (length × width). Glass height = water height + gap.
40 × 231 = 9,240 in³. 36 × 18 = 648 in². 9,240 ÷ 648 = 14.26 in, rounded to 14.25 in. Glass height = 14.25 + 1 = 15.25 in.
14.25 in of water · 15.25 in glass height · volume check 40.0 gal (151.3 L).
Standard mode checks out the same way. A standard 55 gal measures 48 × 13 × 21 in, with a 4.33 ft² footprint and 56.7 gallons gross (48 × 13 × 21 = 13,104 in³ ÷ 231). And the fit check catches real mistakes: a 40-gallon breeder (36 × 18 in) does not fit a space 40 in long × 16 in deep — it is 2 in too deep.
How to read your results
In standard mode, the verdict is the tank's outside dimensions in inches, and the stat grid shows the footprint in square feet, the gross volume in US gallons, and the fit verdict — "Fits", "Does not fit", or "No space entered" when you skipped the space fields. The checks below say how much too long or too deep it is when it does not fit, and remind you that brands vary by about half an inch, so measure the tank (or the listing) before you buy the stand.
In custom mode, the verdict is the solved water dimension, and the stat grid shows that dimension, the glass height (when solving for height) or the target volume (otherwise), and the volume check recomputed from the rounded size. A caution appears when the solved water height is over 24 in — tall tanks need thicker glass, more light to reach the bottom, and long arms for maintenance — with a fix pointing at the Glass Thickness Calculator.
In both modes, remember the gross volume is what the outside dimensions give. The water actually in the tank is less once glass, substrate and the gap above the waterline are counted — use the Actual Water Volume Calculator for that number.
Common mistakes
- Trusting the label as a volume. A "125-gallon" tank measures 117.8 gallons; a "55-gallon" measures 56.7. The label is a size class.
- Checking length but not depth. Depth is the dimension that usually fails — a 40-gallon breeder is 36 in long but 18 in deep, and it does not fit a 16 in deep space.
- Ordering glass to the water height. The water dimension is not the glass dimension: add the gap above the water to the height, and twice the glass thickness to length and width.
- Forgetting clearance. Plan 2–4 in behind the tank for hang-on filters, overflow boxes, hoses and cables, and room above for the lid and light.
- Picking height over footprint. Floor space matters more than height for most fish — more swimming length, more surface for gas exchange, more room to aquascape for the same gallons. A 20 long has 25% more floor space than a 20 high (2.50 ft² against 2.00 ft²).
- Measuring inside when the table is outside. Standard dimensions are outside dimensions of the glass; measure the tank you own the same way, ignoring the trim.
- Using US sizes for a UK or European tank. Tanks there are sold by length in centimetres and volume in litres (for example 60 × 30 × 36 cm, 65 L) — use Custom build or the Volume Calculator for those.
- Going tall without checking the glass. Above about 24 in of water, check the glass with the Glass Thickness Calculator before you order.
Standard tank sizes
Typical outside dimensions of standard US glass aquariums, as published by US manufacturers in product catalogs and spec sheets. Dimensions vary by about 1/2 in between brands and production runs, so this is a planning guide — measure the tank you own. The gross volume is what the outside dimensions actually give.
| Standard size | Typical outside L × W × H (in) | Footprint (ft²) | Gross volume (US gal) |
|---|---|---|---|
| 5 gal | 16 × 8 × 10 | 0.89 | 5.5 |
| 10 gal | 20 × 10 × 12 | 1.39 | 10.4 |
| 15 gal | 24 × 12 × 12 | 2.00 | 15.0 |
| 20 high | 24 × 12 × 16 | 2.00 | 19.9 |
| 20 long | 30 × 12 × 12 | 2.50 | 18.7 |
| 29 gal | 30 × 12 × 18 | 2.50 | 28.1 |
| 30 breeder | 36 × 18 × 12 | 4.50 | 33.7 |
| 40 breeder | 36 × 18 × 16 | 4.50 | 44.9 |
| 40 long | 48 × 12 × 16 | 4.00 | 39.9 |
| 55 gal | 48 × 13 × 21 | 4.33 | 56.7 |
| 65 gal | 36 × 18 × 24 | 4.50 | 67.3 |
| 75 gal | 48 × 18 × 21 | 6.00 | 78.5 |
| 90 gal | 48 × 18 × 24 | 6.00 | 89.8 |
| 110 gal | 48 × 18 × 30 | 6.00 | 112.2 |
| 120 gal | 48 × 24 × 24 | 8.00 | 119.7 |
| 125 gal | 72 × 18 × 21 | 9.00 | 117.8 |
| 150 gal | 72 × 18 × 28 | 9.00 | 157.1 |
| 180 gal | 72 × 24 × 25 | 12.00 | 187.0 |
| 210 gal | 72 × 24 × 29 | 12.00 | 216.9 |
| 220 gal | 72 × 24 × 30 | 12.00 | 224.4 |
| 300 gal | 96 × 24 × 30 | 16.00 | 299.2 |
FAQ
What are the dimensions of a 55-gallon tank?
Typically 48 × 13 × 21 in outside (length × width × height), with a 4.33 ft² footprint and 56.7 gallons gross from those dimensions. Brands vary by about half an inch, so measure the tank or check the listing before you buy the stand.
20 high vs 20 long — what is the difference?
Same nominal size, different shape. A 20 high is 24 × 12 × 16 in; a 20 long is 30 × 12 × 12 in. The long has 25% more floor space (2.50 ft² against 2.00 ft²) and the same 18.7–19.9 gallons gross. For most fish the long is the better tank — more swimming length and more surface for gas exchange.
What is a breeder tank?
A short, wide tank built for footprint rather than height — for example a 40-gallon breeder is 36 × 18 × 16 in, with a 4.50 ft² footprint. Breeders suit bottom-dwellers, breeding setups and aquascapes, where floor space matters more than water depth.
How do I work out custom dimensions?
Pick a target volume and the two dimensions you know, and the missing one is volume ÷ the other two: height = gallons × 231 ÷ (length × width). The result is the water dimension, rounded to the nearest 1/4 in (1/2 cm in Metric). Add the gap above the water to the height and twice the glass thickness to length and width to get the glass size to order.
Will it fit my stand or furniture?
Enter your space length and depth in standard mode and the calculator checks both. A tank must sit fully supported, never overhanging the edge — and leave 2–4 in behind it for filters, hoses and cables. Depth is the dimension that usually fails, so measure the space front to back, not just along the wall.
Are the same sizes sold in the UK and Europe?
No — tanks there are sold by length in centimetres and volume in litres (for example 60 × 30 × 36 cm, 65 L), not by US gallon sizes. Use Custom build in centimetres and litres, or the Volume Calculator, for those tanks.
Sources
- Aqueon dimensions tables — typical outside dimensions of standard glass aquariums, as published by US manufacturers in product catalogs and spec sheets (Manufacturer).
- All-Glass / Aqueon standard-size chart, as reproduced in hobby references (Manufacturer).
- NIST Handbook 44, Appendix C — US gallon = 231 in³; inch = 2.54 cm; 1 ft² = 144 in² (Standard).