Tank Weight Calculator

Units

Use this instead of dimensions if you know the gallons

Left blank, it is estimated from the water depth

Rock and wood

Water is 8.34 lb per gallon; glass is 2.5 kg/m² per mm of thickness (soda-lime float glass, EN 572-1). A "55-gallon" tank is about 460 lb of water alone, before glass, substrate and rock. The stand and floor see the filled total, not the empty tank.

How heavy is the filled tank?

Enter the tank dimensions or the volume in gallons — the filled weight appears here, with the water, glass, substrate and hardscape broken out.

Why use this calculator?

  • Know if the floor and stand can take it — before the tank is full and too late to move.
  • No surprises on moving day: the filled weight is several times the empty weight.
  • The number insurers and landlords ask for is the filled weight, not the tank label.

Don't know your tank's gallons? Measure it with the Tank Volume Calculator. Choosing the glass itself? Use the Glass Thickness Calculator. · Back to Tank Size & Setup

Enter your tank's dimensions or volume, glass thickness, substrate and hardscape, and get the filled weight in pounds and kilograms — the number your stand, floor, landlord and insurer actually care about. Water alone is most of it: a "55-gallon" tank holds about 460 lb of water before glass, substrate and rock. Everything runs in your browser; nothing is saved.

How it works

The filled total is four line items added together: water + glass + substrate + hardscape. Each one is worked out from a stated figure, and the result shows the breakdown so you can see which line dominates.

Water. Volume in US gallons × 8.34 lb/gal. Fresh water weighs 8.34 lb per US gallon (1 litre = 1 kg). If you enter dimensions instead of gallons, the volume is length × width × height ÷ 231 (a US gallon is 231 cubic inches); in centimetres it is length × width × height ÷ 1,000 litres, then ÷ 3.78541 to gallons. Note that outside dimensions overstate the water slightly — the glass takes up space and the waterline sits below the rim — so the calculator's volume is the tank's full outside volume, not the water actually in it. For a closer number, enter the real water volume in gallons.

Glass. Total pane area × thickness × 2.5 kg/m² per mm. Soda-lime float glass weighs 2.5 g/cm³ (EN 572-1), which works out to 2.5 kg per square metre per millimetre of thickness. The panes are two sides (length × height), two ends (width × height) and the bottom (length × width). If you leave the thickness blank, it is estimated from the water depth with the same conservative table as the Glass Thickness Calculator (braced values: up to 12 in deep 6 mm, 18 in 8 mm, 24 in 12 mm, 30 in 15 mm, 36 in 19 mm) and labelled as an estimate — measure your glass for the exact number.

Substrate and hardscape. Entered by you in pounds. Weigh rock dry before it goes in, and use the bag weights for substrate — or work the substrate out with the Substrate Calculator first.

Total. Water + glass + substrate + hardscape. That is the filled weight the stand and the floor have to carry.

Worked example

A standard 55-gallon glass tank, 48 × 13 × 21 in, 6 mm glass, 20 lb of substrate and 10 lb of hardscape.

Inputs

Length 48 in, width 13 in, height 21 in, glass 6 mm, substrate 20 lb, hardscape 10 lb.

Formula

Volume = L × W × H ÷ 231. Water = gallons × 8.34. Glass = pane area × thickness × 2.5 kg/m²/mm. Total = water + glass + substrate + hardscape.

Calculation

Volume = 48 × 13 × 21 ÷ 231 = 56.7 gal. Water = 56.7 × 8.34 = 473.1 lb. Glass area = 2 × (48 × 21) + 2 × (13 × 21) + 48 × 13 = 3,186 sq in = 2.06 m²; 2.06 × 6 × 2.5 = 30.8 kg = 68.0 lb. Total = 473.1 + 68.0 + 20 + 10 = 571.1 lb.

Result

571 lb filled (259 kg) — water 473.1 lb, glass 68.0 lb, substrate 20 lb, hardscape 10 lb. Water alone is about 83% of the total.

The same tank entered by volume only — 55 gallons, no dimensions — gives 458.7 lb of water and no glass weight, because the glass cannot be worked out without the pane sizes. Enter the dimensions when you can: the glass is about 68 lb here, and it is the line most people forget.

How to read your results

The big number is the filled total in pounds, with kilograms beside it. Under it, the stat grid breaks it into water, glass, and substrate + hardscape, so you can see where the weight sits. Water is almost always the largest share — about 70% of a complete setup, and more in a bare tank.

The check rows say what to do with the number. The stand row is the one that matters most: compare the filled total with the stand's rated capacity, and use only 70–80% of that rating. A stand rated below the filled total is not a stand for this tank.

What to do next: if the total is close to or above the stand rating, get a stronger stand before filling. Then work out what the floor sees — the same weight spread over the tank's footprint — with the Floor Load Checker. The filled total is also the number landlords and insurers ask for, so keep it with the tank's paperwork.

Common mistakes

  • Quoting the tank label ("55 gallons") as the weight. The label is a volume; the filled weight is roughly 10 lb per gallon once glass, substrate and rock are counted — about 550–650 lb for a 55-gallon setup.
  • Forgetting the glass. A 55-gallon glass tank weighs about 78 lb empty; a 125-gallon about 206 lb.
  • Using the empty tank weight as the number that matters. The stand and the floor see the filled tank, not the empty one.
  • Guessing the substrate and hardscape instead of weighing them. Rock is heavy and easy to underestimate — weigh it dry before it goes in.
  • Entering the label size as the water volume. The glass takes up space and the waterline sits below the rim, so a "55-gallon" tank holds about 50 gallons of water. Enter the real volume for a closer number.
  • Moving a filled or partly filled tank. It strains the silicone seams and can crack the glass or the bottom pane — drain it fully, remove the substrate if possible, and carry it empty.
  • Assuming acrylic weighs the same as glass. Acrylic is about half the weight of glass at the same panel thickness (1.19 g/cm³ against 2.5 g/cm³) — but once filled, the difference is small because water dominates.

Typical filled weights

Approximate filled weights for common tank sizes, worked out with the same method as this calculator: water at 90% of the label size (allowing for glass and the rim gap), empty glass weight from the makers' figures, substrate at 1 lb per gallon. No stand, rock, sump or equipment — add those on top.

TankWaterEmpty glass tankSubstrateFilled total (approx.)
10 gal75.1 lb11 lb10 lb96 lb
29 gal217.7 lb40 lb29 lb287 lb
55 gal412.8 lb78 lb55 lb546 lb
75 gal563.0 lb140 lb75 lb778 lb
125 gal938.3 lb206 lb125 lb1,269 lb

The "10 lb per gallon" rule of thumb is a fair rough guide for a complete freshwater setup — water 8.34 lb/gal plus usually 1–3 lb/gal more for tank, substrate, rock and stand. Reef tanks with heavy rock and a sump can reach 12 lb per gallon of display tank.

FAQ

How much does a full 55-gallon tank weigh?

About 550–650 lb. The water is about 413 lb (50 gallons at 8.34 lb/gal), the empty glass tank about 78 lb, gravel about 55 lb — roughly 546 lb before the stand — and a wooden stand adds 40–80 lb.

How much does a gallon of water weigh?

8.34 lb per US gallon for fresh water (about 0.998 kg per litre at 70°F). Saltwater at SG 1.025 is about 8.55 lb per US gallon.

Is the "10 lb per gallon" rule accurate?

As a rough guide, yes for a complete freshwater setup: water 8.34 lb/gal plus 1–3 lb/gal for the tank, substrate, rock and stand. It is not a measurement — use the calculator's breakdown when the number matters.

How much does an empty glass tank weigh?

About 11 lb for a 10-gallon, 40 lb for a 29-gallon, 78 lb for a 55-gallon, 140 lb for a 75-gallon and about 206 lb for a 125-gallon, from the makers' figures.

Is an acrylic tank lighter?

Yes — acrylic is about 1.19 g/cm³ against glass at 2.5 g/cm³, so an acrylic tank is roughly half the weight of a glass tank at the same panel thickness. Once filled, the difference is small because water dominates the total.

Can I move a filled tank?

No. Moving a filled or partly filled tank strains the silicone seams and can crack the glass or the bottom pane. Drain it fully, remove the substrate if possible, and carry it empty.

Why does the calculator ask for the real water volume?

Because the label size is the tank's full outside volume. The glass takes up space and the waterline sits below the rim, so a "55-gallon" tank holds about 50 gallons of water — using the label size overstates the water by about 10%.

Sources

No URLs are listed for these sources because no source page URL is on file for them; they are listed by name.

  1. CRC Handbook of Chemistry and Physics — density of water at about 21 °C (70 °F): 0.998 kg/L, or 8.34 lb per US gallon; seawater at SG 1.025 about 8.55 lb/US gal (Standard).
  2. NIST Handbook 44, Appendix C — US gallon (231 in³), pound (0.45359237 kg) (Standard).
  3. EN 572-1 — soda-lime float glass density about 2.5 g/cm³ (Standard).
  4. Vitro Architectural Glass technical data sheets — soda-lime glass density 2.51 g/cm³ (Manufacturer).

Related tools