Find the maximum oxygen your water can hold — the saturation ceiling — at your temperature, salinity and altitude, using the Benson & Krause equation, and turn a meter reading into % saturation. This tool reports saturation against the maximum only; it does not diagnose fish. Everything runs in your browser; nothing is saved.
How it works
Water can only hold so much oxygen, and that ceiling depends on temperature, salt and air pressure. This tool works out the ceiling with the Benson & Krause (1984) equation — the equation the USGS DOTABLES program and Standard Methods 4500-O use — then compares your meter reading with it.
Sea-level saturation, fresh water. ln C0 = −139.34411 + 1.575701×10^5/T − 6.642308×10^7/T² + 1.2438×10^10/T³ − 8.621949×10^11/T^4, where T is the temperature in kelvin (°C + 273.15) and C0 is in mg/L.
Salt cuts the ceiling. ln C = ln C0 − S × (0.017674 − 10.754/T + 2140.7/T²), where S is salinity in ppt. Full-strength seawater (35 ppt) holds about 18% less oxygen than fresh water at the same temperature.
Altitude cuts it further. Pressure P = (1 − 2.25577×10^−5 × h)^5.25588, where h is altitude in metres (ISO 2533 standard atmosphere), and the maximum at altitude is Cp = C × P. Every 1,000 ft of altitude takes off roughly 3–4%.
% saturation. % = measured ÷ Cp × 100. A reading of 6.0 mg/L means something different at sea level than at 1,600 m — the percentage says which.
The bands. Aim for 6 mg/L or more, at 80–100% of saturation. 4–6 mg/L is manageable but stressful, especially when the water is warm or the tank is crowded. Under 4 mg/L is dangerous. Over 105% is supersaturation — heavy photosynthesis, a leaking pump intake, or a meter needing calibration.
Worked example
Freshwater tank at 77 °F (25 °C), 1,600 m up, meter reads 6.0 mg/L.
Temperature 25 °C (77 °F), salinity 0 ppt, altitude 1,600 m, meter reading 6.0 mg/L.
Sea-level saturation from Benson & Krause; pressure from ISO 2533; maximum at altitude = sea-level × pressure; % = measured ÷ maximum × 100.
Sea-level saturation C0 = 8.26 mg/L. Pressure P = (1 − 2.25577×10^−5 × 1600)^5.25588 = 0.9639^5.25588 = 0.824 atm. Maximum Cp = 8.26 × 0.824 = 6.81 mg/L. Saturation = 6.0 ÷ 6.81 × 100 = 88%.
88% saturated — good. The 6.0 mg/L reading is above 6 mg/L and inside 80–100% of the maximum at this altitude.
Two more checks from the same water. At sea level the same 25 °C freshwater holds 8.26 mg/L — the altitude alone costs about 18% of the ceiling. And reef water at 26 °C and 35 ppt holds 6.66 mg/L at sea level, while fresh water warmed from 77 °F to 86 °F drops from 8.26 to 7.56 mg/L.
How to read your results
The big number is either your % saturation (with a meter reading) or the maximum in mg/L (without one). The stat grid shows the three numbers behind it: the maximum at your altitude, the sea-level saturation before the altitude cut, and the pressure in atmospheres.
With a reading, judge it two ways: the mg/L against the bands (6 or more is the aim, 4–6 is stressful, under 4 is dangerous) and the % against 80–100%. A 6.0 mg/L reading at altitude can be 88% — good — while the same 6.0 mg/L in a warm tank at sea level is only 73% of a 8.26 mg/L ceiling, which is low. Both numbers matter; neither alone tells the story.
Over 105% means supersaturation. Check the reading again before acting on it — a meter that needs calibration is the usual cause, and heavy photosynthesis or a leaking pump intake can do it too.
Without a meter reading, the result is the ceiling only. It tells you what "full" looks like at your conditions, not whether your tank is full — that needs a meter.
Common mistakes
- Judging a mg/L reading without the ceiling. 6.0 mg/L is good at 1,600 m (88%) and low in warm water at sea level (73%).
- Forgetting that warm water squeezes oxygen from both sides — it holds less, and fish breathe faster in it. A summer heat wave is the riskiest time.
- Trusting a reading over 100% at face value. Supersaturation usually means the meter needs calibration — check it again before acting.
- Treating a low reading as a diagnosis. This tool reports saturation only; it does not diagnose fish. Fish gasping at the surface is often oxygen, but gill damage from ammonia or nitrite looks the same — check those too.
- Adding chemicals before moving the surface. Oxygen enters at the surface — a ripple from the filter outlet or an air stone does more than any additive.
- Testing only by day. Plants make oxygen by day and use it at night, so a heavily planted or CO₂-injected tank is lowest just before the lights come on.
Oxygen saturation by temperature (sea level)
Maximum dissolved oxygen in mg/L, fresh water against 35 ppt seawater. All figures from the Benson & Krause equation, verified against the published saturation tables.
| Temp | Fresh water (mg/L) | Seawater, 35 ppt (mg/L) |
|---|---|---|
| 59 °F (15 °C) | 10.08 | 8.14 |
| 64 °F (18 °C) | 9.51 | 7.71 |
| 68 °F (20 °C) | 9.09 | 7.40 |
| 72 °F (22 °C) | 8.71 | 7.11 |
| 75 °F (24 °C) | 8.44 | 6.90 |
| 77 °F (25 °C) | 8.26 | 6.77 |
| 79 °F (26 °C) | 8.10 | 6.65 |
| 82 °F (28 °C) | 7.86 | 6.47 |
| 86 °F (30 °C) | 7.56 | 6.24 |
| 90 °F (32 °C) | 7.28 | 6.02 |
Oxygen saturation by altitude (fresh water, 77 °F)
Maximum dissolved oxygen at altitude, and its share of the sea-level ceiling. All figures from the Benson & Krause equation with the ISO 2533 pressure step.
| Altitude | Maximum (mg/L) | Share of sea level |
|---|---|---|
| Sea level | 8.26 | 100% |
| 1,000 ft | 7.97 | 96% |
| 2,500 ft | 7.54 | 91% |
| 5,000 ft | 6.88 | 83% |
| 7,500 ft | 6.26 | 76% |
| 10,000 ft | 5.68 | 69% |
FAQ
How much dissolved oxygen should an aquarium have?
Aim for 6 mg/L or more, at 80–100% of saturation. 4–6 mg/L is manageable but stressful, especially when the water is warm or the tank is crowded; under 4 mg/L is dangerous. A healthy, well-aerated tank usually runs at 80–100% of its ceiling.
Why does warm water hold less oxygen?
Because the saturation ceiling falls as temperature rises — fresh water at sea level holds 9.09 mg/L at 68 °F, 8.26 at 77 °F and 7.56 at 86 °F. And fish breathe faster in warm water, so a heat wave squeezes oxygen from both sides at once.
Does saltwater hold less oxygen?
Yes — full-strength seawater holds about 18% less than fresh water at the same temperature (6.77 vs 8.26 mg/L at 77 °F). Reef tanks rely on strong surface movement and protein skimmers partly for this reason.
How does altitude affect oxygen?
Less air pressure means a lower ceiling: at 5,000 ft (1,524 m) fresh water at 77 °F holds about 83% of sea-level oxygen (6.88 vs 8.26 mg/L). Every 1,000 ft takes off roughly 3–4%. High-altitude homes need good surface agitation.
What is percent saturation?
Your reading divided by the maximum the water can hold at your temperature, salinity and altitude, times 100. It is the only fair way to judge a reading — 6.0 mg/L is 88% at 1,600 m and 73% in warm water at sea level.
My fish are gasping at the surface — is it oxygen?
Often, especially at night, in warm weather or after a power cut. Increase surface movement straight away (air stone, raise the filter outlet) and check ammonia and nitrite too — gill damage from them looks the same as low oxygen. Warm water also makes ammonia more toxic, so check that with the Free Ammonia Calculator. If fish look sick, see an aquatic vet — this tool reports a number, it does not diagnose fish.
Sources
- Peer-reviewed — Benson, B. B. & Krause, D. (1984). The concentration and isotopic fractionation of oxygen dissolved in freshwater and seawater in equilibrium with the atmosphere. Limnology and Oceanography 29: 620–632. Used for the saturation equation and the salinity step.
- Government — US Geological Survey, Office of Water Quality Technical Memorandum 2011.03 (change to solubility equations for oxygen in water) and the DOTABLES program. Used for the same Benson & Krause equations for temperature, salinity and pressure.
- Standard — APHA/AWWA/WEF, Standard Methods, Method 4500-O: Oxygen (Dissolved). Solubility of oxygen in water exposed to water-saturated air.
- Standard — International Standard Atmosphere (ISO 2533). Pressure with altitude, P = (1 − 2.25577×10^−5 × h)^5.25588 atm, h in metres. The altitude step is a simplification that stays within about 1% of the full method.