Turn a daily dose into a dosing-pump program — mL per dose, seconds per dose, and the exact dose times spread across the day. Check the pump against reality with a timed calibration run into a measuring cylinder, and get the corrected seconds when the real flow rate differs from the spec. Everything runs in your browser; nothing is saved.
How it works
mL per dose = daily dose (mL/day) ÷ doses per day. Seconds per dose = (mL per dose ÷ pump flow rate in mL/min) × 60. Dose times start at your first-dose time and spread evenly across 24 hours — interval = 24 hours ÷ doses per day. With 4 doses a day the interval is 6 hours; with 24 it is 1 hour.
Calibration check. True flow rate (mL/min) = mL actually delivered ÷ run time in minutes. Corrected seconds per dose = (mL per dose ÷ true flow rate) × 60. Bulk Reef Supply's own example: 10 mL in 20 seconds is 0.5 mL/s, or 30 mL/min.
The spreading model. This tool spreads doses evenly across 24 hours from your first-dose time, the Bulk Reef Supply "total daily amount and how often you want it dosed" model. JoyReef's guide spreads doses inside a user-chosen window instead (for example 08:00–20:00). The choice is stated here, not hidden — if you want your doses inside a window, set the first-dose time to the window start and accept that the last doses fall outside it, or program the window in the pump itself.
Calibrate with the same liquid you will dose. A thick solution flows slower than RO/DI water, so a water calibration can mislead. Recalibrate every 2–3 months — tubing wears and the flow rate drifts — and whenever the tubing changes.
Worked example
An alkalinity part at 10 mL/day, 4 doses a day, pump flow rate 1.5 mL/min, first dose 08:00 — plus a calibration run.
Daily dose 10 mL, 4 doses/day, flow 1.5 mL/min, first dose 08:00. Calibration: 60-second run delivers 1.4 mL.
mL per dose = daily ÷ doses. Seconds = (mL per dose ÷ flow) × 60. Interval = 24 h ÷ doses. True flow = mL ÷ minutes.
mL per dose = 10 ÷ 4 = 2.5 mL. Seconds = (2.5 ÷ 1.5) × 60 = 100 s. Interval = 24 ÷ 4 = 6 h. True flow = 1.4 ÷ 1 = 1.4 mL/min. Corrected seconds = (2.5 ÷ 1.4) × 60 = 107.1 s.
2.5 mL per dose, 100 seconds (107 seconds at the true flow), at 08:00, 14:00, 20:00, 02:00.
The pump runs about 7% slower than its stated 1.5 mL/min — inside the range an uncalibrated pump can be off by (JoyReef warns 30–40%) — so use the corrected 107 seconds, not the 100. Before the line goes on the tank, do the trial run: put the dosing line into a graduated cylinder, let the pump run its program, and check it delivers 2.5 mL per dose.
How to read your results
The big number is the mL per dose, with the seconds per dose beside it. The stat grid shows mL per dose, seconds per dose, the interval between doses, and — when you entered a calibration run — the true flow rate.
Read the rows under the verdict. "OK" on the calibration row means the true flow is within 5% of what you entered — the program is trustworthy. "Caution" means either no calibration was entered (calibrate before you trust the seconds) or the true flow is more than 5% off (use the corrected seconds, and check the tubing).
The dose times are the program. Enter them in the pump, run the trial in a cylinder, and only then attach the line to the tank.
Common mistakes
- Trusting the spec flow rate without calibrating. An uncalibrated pump can be 30–40% off (JoyReef) — the seconds are only as good as the flow rate behind them.
- Calibrating with water and dosing a thick solution. Thick solutions flow slower than RO/DI water — calibrate with the liquid you will dose.
- Skipping the trial run. Program the pump, run it into a graduated cylinder, and check it delivers the right mL per dose before the line goes on the tank.
- Never recalibrating. Tubing wears and flow drifts — recalibrate every 2–3 months and whenever tubing changes.
- Taking the daily dose from a forum. This tool never sets your daily dose — it comes from your additive's label or your own parameter testing.
- Dumping the whole daily dose at once. More, smaller doses keep alkalinity and calcium steadier than one big daily dose.
Program by daily dose (4 doses/day, 1.5 mL/min)
mL per dose and seconds per dose at each daily dose, with 4 doses a day and a 1.5 mL/min pump. All figures recomputed with the formulas above.
| Daily dose | mL per dose | Seconds per dose | Interval |
|---|---|---|---|
| 5 mL/day | 1.25 mL | 50 s | Every 6 h |
| 10 mL/day | 2.5 mL | 100 s | Every 6 h |
| 20 mL/day | 5 mL | 200 s | Every 6 h |
| 40 mL/day | 10 mL | 400 s | Every 6 h |
Double the daily dose and the seconds double; double the doses per day and the seconds halve. The interval depends only on the doses per day — 24 hours divided by the count.
FAQ
Does this tool choose my daily dose?
No. The daily dose comes from your additive's label or your own parameter testing. This tool turns a dose you already know into a pump program — it never recommends a dose, a product or a concentration.
Why spread the doses across 24 hours?
More, smaller doses keep alkalinity and calcium steadier than one big daily dump, and two-part dosing in small doses avoids calcium carbonate precipitation (Holmes-Farley). This tool spreads evenly across 24 hours from your first-dose time; JoyReef's guide spreads inside a chosen window instead — both are published patterns, and the tool states which one it uses.
How often should I recalibrate?
Every 2–3 months, and whenever the tubing changes — peristaltic tubing wears and the flow rate drifts (JoyReef). Mark the container levels weekly as a drift and siphon check.
My pump delivers less than it should — what do I do?
Use the corrected seconds per dose the tool gives you, and check the tubing — wear is the usual cause. If the drift keeps growing, replace the tubing and recalibrate. If parameters spike after starting the pump, take it offline and recheck the program.
What is the smallest dose my pump can deliver accurately?
This tool does not enforce a minimum dose — it depends on your pump, so check its manual. If a per-dose amount falls below what your pump delivers accurately, use fewer doses per day so each dose is bigger.
Should I calibrate with water or with the real solution?
With the real solution, through its own tubing. A thick solution flows slower than RO/DI water, so a water calibration can mislead — and Bulk Reef Supply's calibration example itself is timed in water only as a way to measure the rate, not as a substitute for the real liquid.
Sources
- Manufacturer — Bulk Reef Supply, "How To Choose & Set Up A Dosing Pump". Calibration by timing how long it takes to move 10 mL ("if it takes 20 seconds to deliver 10 ml of water, that would be 0.5 mL/second or roughly 30 mL/minute"); schedule as "the total daily amount and how often you want it dosed"; trial run into a graduated cylinder before attaching lines to the tank. bulkreefsupply.com
- Manufacturer — JoyReef dosing-pump guide. Calibration in mL per 60 seconds; "always calibrate the pumps before programming real doses"; an uncalibrated pump "can deviate by 30–40% from the actual flow rate"; recalibrate every 2–3 months as tubing wears; calibrate with the same solution you will dose. portal.joy-reef.com
- Peer-reviewed — Holmes-Farley, R., Reefkeeping Magazine. Separate small doses of the two parts avoid calcium carbonate precipitation. No URL on file — listed by name only.
- Hobby practice — Reef2Reef / Hydros thread. Calibration by running the pump for one minute, measuring what was dispensed, and letting the controller compute the run time. Used only as corroboration of the Bulk Reef Supply and JoyReef methods. reef2reef.com