Work out the baking soda for a KH rise, in weighed grams — no guessing from spoonfuls. Enter your current KH, a higher target KH and the tank volume, and get the dose split over days at no more than 1 dKH a day. For example, a 20-gallon tank raising KH by 2 dKH needs 4.54 g of baking soda, split as about 2.27 g a day over 2 days. This tool only raises KH, never lowers it — and it keeps to one verified path, baking soda, so there is no second salt to confuse the dose with. Everything runs in your browser; nothing is saved.
How it works
The formula is stoichiometric. 1 dKH = 0.357 meq/L of alkalinity, and baking soda (NaHCO3, 84.007 g/mol) supplies one equivalent per mole — so 0.357 × 84 = 30 mg/L of baking soda per dKH, which is 3 g per 100 L per dKH. In grams: baking soda = (tank litres ÷ 100) × KH gap × 3.0.
Cross-checked two ways. ReefCalcs gives the same 3 g per 100 L per dKH, and the teaspoon rules in other guides agree: 1 level teaspoon per 10 gallons is about 4 dKH (4.6 g ÷ 37.85 L = 121.5 mg/L ÷ 30 = 4.05 dKH).
Split at the 1 dKH/day cap. A stocked tank should rise no more than about 1 dKH per day — a fast KH swing stresses fish more than the low reading itself, and KH and pH move together, so a big one-day KH jump also moves pH. Days = ceil(KH gap ÷ 1), and each day's dose is the total divided by the days.
Dissolve first, weigh when you can. Stir each day's dose into a cup of tank water until clear, then pour it where the filter outlet spreads it — never tip dry powder straight into the tank. Teaspoons are approximate: 1 level teaspoon of baking soda is about 4.6 g (USDA, via Aquarium Toolbox). Other guides quote 4.8 g for the same spoon — spoons vary by packing, which is exactly why a scale beats a spoon. Retest KH 24 hours after each dose before the next one.
One salt only. Soda ash (Na2CO3) is not offered here. Its stoichiometric dose is 1.89 g per 100 L per dKH, but mixing two chemicals on one page invites the same units error this page exists to prevent — follow a commercial buffer's own label instead.
Worked example
A 20-gallon tank (75.7 L), raising KH by 2 dKH — for example from 4 to 6 dKH — with baking soda.
Current KH 4 dKH, target KH 6 dKH (gap 2 dKH), volume 20 US gal (75.7 L).
Baking soda in grams = 3 g per 100 L per dKH × the KH gap. Days = ceil(gap ÷ 1 dKH/day).
(75.7 ÷ 100) × 2 × 3.0 = 4.54 g. Days = ceil(2 ÷ 1) = 2 days. Per day = 4.54 ÷ 2 = 2.27 g, about 0.5 level teaspoons (2.27 ÷ 4.6).
4.54 g of baking soda — about 1.0 level teaspoon in total — split as about 2.27 g a day over 2 days. Retest KH before the second dose.
The same case through the disputed figure, shown only so you can recognise it: one popular source (Gera Tools) says 1 g per gallon ≈ 1.4 dKH, which would give (2 ÷ 1.4) × 20 = 28.6 g here — about 6× the stoichiometric dose. That figure matches a millilitre dose of concentrated stock solution, not a gram dose of dry powder: 1 mL per gallon of Randy Holmes-Farley Recipe #1 stock solution (594 g per gallon, about 1,900 meq/L) is 0.494 meq/L = 1.38 dKH. Stoichiometry says 1 g per gallon is 264 mg/L = 8.8 dKH, so the Gera figure is off by about 6.3×. Dosing the 28.6 g would raise KH by about 12.6 dKH instead of 2 — which is why it is shown and not used.
How to read your results
The verdict word is the total dose in grams of baking soda. Under it, the pair line shows the KH move and the tank volume the dose was worked out for — always check the volume is your actual water volume, not the label size.
The stat grid shows the three numbers that decide the dose: the KH gap in dKH, the number of days at the 1 dKH/day cap, and the per-day dose in grams (with its approximate teaspoons). Below the stats, the checks are grouped. "Caution" is a risk — read it before you start. "OK" means that check passed. The Gera row always appears, showing the disputed figure for your exact case so you can recognise it if you have seen it elsewhere.
What to do next: dissolve one day's dose in a cup of tank water, pour it slowly near a powerhead or return pump, and retest KH 24 hours later before the next dose. If KH rose less than expected, rock, substrate or plants may be using alkalinity — adjust rather than doubling up.
Common mistakes
- Using the popular 1 g-per-gallon figure (Gera Tools). It is a grams-vs-millilitres mix-up — about 6× too much — and would raise KH by about 12.6 dKH instead of 2 in the worked example.
- Dosing the whole correction at once. A stocked tank should rise no more than about 1 dKH per day; split it, and retest before each dose.
- Spooning without weighing. A teaspoon of baking soda can weigh 4–6 g depending on packing — a cheap 0.1 g kitchen scale makes the dose repeatable.
- Tipping dry powder straight into the tank. Dissolve it first, and add it to high flow.
- Using baking soda for soft-water species that need low pH, such as discus or Caridina shrimp. Raising KH fights the water they need.
- Chasing a pH number directly. Fix the KH, let the pH follow — raising KH raises pH if CO2 stays the same (doubling KH lifts pH about 0.3).
- Forgetting that KH keeps dropping. Nitrification uses up alkalinity, so heavily stocked tanks slowly lose KH between water changes. If KH falls more than 1–2 degrees a week, change water more often, reduce feeding, or dose a small amount of buffer weekly rather than one large dose.
- Expecting KH to raise GH. It does not — use the GH/KH Remineralisation Calculator or the African Cichlid Buffer Calculator for hardness.
Baking soda per dKH by tank size
Grams of baking soda for a 1 dKH rise, worked out at the tool's own 3 g per 100 L per dKH (1 US gallon = 3.785 L). Teaspoons are rounded to the nearest quarter-teaspoon and are approximate — weigh the dose when you can.
| Tank size | Baking soda per 1 dKH | Teaspoons (approx.) |
|---|---|---|
| 10 US gal | 1.14 g | ¼ tsp |
| 20 US gal | 2.27 g | ½ tsp |
| 29 US gal | 3.29 g | ¾ tsp |
| 40 US gal | 4.54 g | 1 tsp |
| 55 US gal | 6.25 g | 1¼ tsp |
| 75 US gal | 8.52 g | 1¾ tsp |
| 125 US gal | 14.19 g | 3 tsp |
Target KH by tank type
Freshwater tanks usually run 3–8 dKH; reef tanks 7–11 dKH. The preset is the middle of each range.
| Tank type | Target KH | Preset |
|---|---|---|
| Soft-water fish | 1–4 dKH | 2 dKH |
| Neocaridina shrimp | 2–6 dKH | 3 dKH |
| Planted with CO2 | 3–5 dKH | 4 dKH |
| General community | 4–6 dKH | 5 dKH |
| Livebearers | 8–12 dKH | 8 dKH |
| African Rift Lake | 10–15 dKH | 10 dKH |
FAQ
Why split the dose over days?
A stocked tank should rise no more than 1 dKH per day — a fast KH swing stresses fish more than the low reading itself, and KH and pH move together, so a big one-day jump also moves pH. The tool splits the dose at that cap automatically.
Why is one popular source's dose six times higher?
It is a units mix-up: the figure belongs to a millilitre dose of concentrated stock solution, not a gram dose of dry baking soda. The stoichiometric figure — 1 dKH = 30 mg/L of baking soda — is cross-checked two ways (ReefCalcs and the teaspoon rules) and is the one this tool uses.
Can I use soda ash instead?
Not with this tool. It keeps to one verified path (baking soda) rather than offering a second salt whose dose has not been verified the same way. Soda ash's stoichiometric dose is 1.89 g per 100 L per dKH — or follow your commercial buffer's own label.
Can I use potassium bicarbonate instead of baking soda?
It does the same alkalinity job at 35.70 mg/L per dKH (about 19% more by weight than baking soda's 30 mg/L), and adds potassium instead of sodium — about 14 mg/L of potassium per dKH, which plants use, against about 8 mg/L of sodium per dKH from baking soda. This tool only calculates the baking-soda dose; the potassium figure is here so you can compare, not as a second dose path.
Does it matter whether the tank is freshwater or saltwater?
No — the KH chemistry is the same in both, and the tool covers freshwater and saltwater. Reef tanks usually target 7–11 dKH, against 3–8 dKH for most freshwater tanks.
Why does my KH keep dropping?
Nitrification uses up alkalinity, so heavily stocked tanks slowly lose KH between water changes. If KH falls more than 1–2 degrees a week, change water more often, reduce feeding, or dose a small amount of buffer weekly rather than one large dose — and check whether rock, substrate or plants are also consuming it.
Will raising KH raise my pH?
Yes, if CO2 stays the same — doubling KH lifts pH about 0.3 (KH 3 to 6 lifts pH about 7.0 to 7.3). The pH Calculator works it out the other way round, from a target pH.
Sources
- Standard — DIN 38409 (German standard methods for water analysis). 1 dKH = 17.848 mg/L as CaCO3 = 0.3566 mmol/L bicarbonate. Used for the dKH-to-millimoles step.
- Standard — APHA/AWWA/WEF, Standard Methods, Method 2320: Alkalinity. Alkalinity as CaCO3 equivalents; one mole of bicarbonate supplies one equivalent of alkalinity.
- Textbook — Haynes (ed.), CRC Handbook of Chemistry and Physics. Molar masses: sodium bicarbonate 84.007, potassium bicarbonate 100.115, sodium 22.99, potassium 39.10. Used for the grams-per-dKH figures.
- Hobby practice — ReefCalcs alkalinity dosing calculator. Cross-check: gives the same 3 g per 100 L per dKH. reefcalcs.com/calculators/alkalinity-dosing/
- Hobby practice — Gera Tools KH calculator. Cited only as the disputed figure (1 g per gallon ≈ 1.4 dKH), with the grams-vs-millilitres mix-up explained; its dose is not used. geratools.com/aquarium-alkalinity-kh-calculator
- Hobby practice — Aquarium Toolbox alkalinity dosing. Teaspoon weight of baking soda, about 4.6 g (USDA). aquariumtoolbox.com/calculators/alkalinity-dosing
- Government — USGS, Hardness of Water. Hardness and alkalinity expressed as CaCO3.