Protein Skimmer Sizer

Display + sump water volume, not the display alone
The rating is worked out in gallons — litres are converted
Bioload
The manufacturer “rated to” number on the skimmer you own — to check if it is undersized
The unit your skimmer’s rating is printed in

Required rated capacity = total system volume × bioload factor: 1.0× light, 1.5× moderate, 2.0× heavy. A manufacturer “rated to X gallons” figure assumes light stocking — reef guides advise halving the rating or adding 30–50% for dense stocking, which is why this tool shows the full light-to-heavy range. Example: a 75 gal system at moderate bioload needs a skimmer rated 112.5–150 gal. Saltwater / reef only — skimmers do not work in freshwater. Check your skimmer’s manual for its operating depth range.

What skimmer rating do you need?

Enter your total system volume and pick a bioload — the rated-capacity range appears here, with the light, moderate and heavy figures side by side.

Why use this calculator?

  • Shop by a rated-capacity range for your real system volume and bioload — instead of trusting one brand’s “rated to” number at face value.
  • See the light, moderate and heavy figures side by side, so you can see how much the answer moves with stocking.
  • Check whether the skimmer you already own is undersized before you buy a replacement.
  • Avoid oversizing — a skimmer far above the range can strip nutrients your corals need.

Work out your total system volume first with the Tank Volume Calculator, and size the sump the skimmer sits in with the Sump Size Calculator. · Back to Tank Size & Setup

Enter your total system volume and bioload — get the manufacturer rated capacity your protein skimmer needs, as a range, with the light, moderate and heavy figures side by side. Saltwater and reef only: protein skimmers do not work in freshwater. Everything runs in your browser; nothing is saved.

How it works

Required rated capacity = total system volume × bioload factor. The factors are 1.0× light, 1.5× moderate, 2.0× heavy, per the js11.eu.org protein-skimmer calculator. Use total system volume (display + sump), not the display alone.

Why a range, not one number. A manufacturer "rated to X gallons" figure assumes light stocking — reefers routinely halve the rating. FinSanctuary advises cutting the manufacturer rating roughly in half (equivalent to 2.0× for typical stocking), and Recifart adds 30–50% for dense stocking (1.3–1.5×). The three sources converge around 1.5× for moderate stocking, but a lightly stocked tank is 1.0× by the calculator and 2.0× by the halve-the-rating rule — that disagreement is real, so this tool shows the full light-to-heavy range and highlights your bioload's figure, instead of pretending one number is exact.

What it does not do. Manufacturer "rated to X gallons" has no standardised test, so ratings are not directly comparable across brands. The 1.0× / 1.5× / 2.0× factors are reef-guide rules of thumb, not manufacturer specs. Bioload is a judgement (fish count, size, feeding), not a measurement. An oversized skimmer can strip nutrients. And this tool gives no operating-depth number — check your skimmer's manual for its operating depth range, because the sump water level must suit the skimmer.

Worked example

A 75 gal system at moderate bioload, with a current skimmer rated 100 gal.

Inputs

System volume 75 gal (display + sump). Bioload moderate. Current skimmer rated 100 gal.

Formula

Required rating = system volume × factor: 1.0× light, 1.5× moderate, 2.0× heavy. Range runs from your bioload's figure up to the heavy figure.

Calculation

Light: 75 × 1.0 = 75 gal. Moderate: 75 × 1.5 = 112.5 gal. Heavy: 75 × 2.0 = 150 gal. Range: 112.5–150 gal. Current 100 gal is below 112.5 gal.

Result

Shop for a skimmer rated 112.5–150 gal. The current 100 gal skimmer is undersized for this system.

The same 75 gal system at light bioload needs 75–150 gal — the range starts lower, but the top stays at the heavy figure, because the range always runs up to 2.0×. Stocking is what moves the bottom of the range.

How to read your results

The verdict word is the recommended rated-capacity range in gallons. Under it, the pair line shows your system volume and bioload. The stat grid shows the range, your bioload's factor, and the system volume. Below that, the table shows all three bioload figures with your bioload marked.

If you entered a current skimmer, the verdict says what it is: undersized (below your bioload's figure — a Needs action), in range (inside the range — OK, judge it by the tank), or above range (above the heavy figure — a Caution, because an oversized skimmer can strip nutrients and leave corals pale and hungry).

What to do next: shop inside the range, check reviews for your tank size rather than trusting one brand's rating, and check the skimmer's manual for its operating depth range before you buy.

Common mistakes

  • Using the display volume alone. The skimmer serves the whole system — display plus sump water.
  • Trusting one brand's "rated to" number at face value. There is no standardised test, so ratings are not directly comparable across brands.
  • Buying far above the range. An oversized skimmer can strip nutrients — more skimmer does not mean cleaner water.
  • Using a skimmer in freshwater. Skimmers need salt water to make stable foam — this tool is for saltwater and reef systems only.
  • Ignoring the sump water level. The skimmer has an operating depth range in its manual, and the sump level has to suit it.
  • Treating the factor as exact. The guides disagree at the light end (1.0× vs 2.0×) — the range is a shopping guide, not a precise requirement.
  • Forgetting that bioload is a judgement. Fish count, size and feeding decide it — if your stocking grows, so does the rating you need.

Rated capacity by bioload

Required manufacturer rated capacity for a 75 gal system, and the factor behind each figure.

BioloadFactorRated capacity (75 gal system)
Light1.0×75 gal
Moderate1.5×112.5 gal
Heavy2.0×150 gal

For any other system volume, multiply the volume by the factor: a 40 gal system at moderate bioload needs 60 gal rated capacity (40 × 1.5), with the range running 60–80 gal.

FAQ

Why a range instead of one size?

Because the guides disagree. The calculator says 1.0× for light stocking; the halve-the-rating rule says 2.0×. The honest answer is the range from your bioload's figure up to the heavy figure.

What does "rated to 150 gal" actually mean?

It is the manufacturer's own claim, with no standardised test behind it — so one brand's 150 gal is not another's. Shop inside the range and check reviews for your tank size.

Can I use a protein skimmer in freshwater?

No. Skimmers need salt water to make stable foam, so they do not work in freshwater. This tool is for saltwater and reef systems only.

Is a bigger skimmer always better?

No. An oversized skimmer can strip nutrients, leaving corals pale and hungry. Stay inside the range unless your bioload genuinely grows.

What volume do I enter — display or total?

Total system volume: display plus sump water. The skimmer serves the whole system, not the display alone.

What is the operating depth range?

The sump water level the skimmer is designed to sit in, from its manual. This tool gives no depth number — check the manual before you buy, because the sump level has to suit the skimmer.

My skimmer is rated above the range — should I replace it?

Not necessarily. If nutrients run near zero, follow the manufacturer's guidance on running it fewer hours or with the air intake reduced — and judge it by the tank, not the rating.

Sources

  1. js11.eu.org — protein skimmer calculator (1.0× / 1.5× / 2.0× bioload factors) — js11.eu.org (Hobby practice).
  2. FinSanctuary — protein skimmers explained (halve the box rating for a stocked reef) — finsanctuary.com (Hobby practice).
  3. Recifart — adds 30–50% for dense stocking (1.3–1.5×). No URL is on file for this source; it is listed by name. (Hobby practice).

Related tools